main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers fm2119h: viewers rendered from the public page · Ray
fm2119h-etched.glb fm2119h: factory component page (tier=lcsc) · Ray
fm2119h-etched.step fm2119h: factory component page (tier=lcsc) · Ray
fm2119h-hero.glb fm2119h: hero GLB from the etched model (keeps the MPN mark) · Ray
fm2119h-hero.overlay.json fm2119h: hero GLB from the etched model (keeps the MPN mark) · Ray
fm2119h.glb Publish 0.1.0 · Ray
fm2119h.kicad_mod Publish 0.1.0 · Ray
fm2119h.kicad_sym Publish 0.1.0 · Ray
fm2119h.lbr Publish 0.1.0 · Ray
fm2119h.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 6 pins · Ray

FM2119H

Shenzhen Fuman · Battery Management ICs · SOT-23-6

FM2119H from Shenzhen Fuman, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 DOUT output Discharge control output that drives the gate of the external discharge N-MOS Q2, going low to VSS to cut the discharge path during overvoltage discharge and overcurrent/short-circuit protection.
2 VM input Charge/discharge current sense input connected through a current-limiting resistor (typically 1 kΩ) to the source of charge N-MOS Q1, detecting the voltage drop across Q1 and Q2.
3 COUT output Charge control output that drives the gate of the external charge control N-MOS, switched low to the VM level to cut off the charge path during overvoltage charge protection.
4 NC unconnected Pin is left floating (悬空, not connected) and is not used by the device.
5 VDD power_in Positive supply input connected to the battery positive terminal, to be decoupled with a 0.1 uF ceramic capacitor; the datasheet specifies VDD operating range of 1.5 V to 10 V.
6 VSS power_in Ground (power supply negative) pin connected to the battery negative terminal, serving as the reference for all protection thresholds.

Key specifications

Parameter Value
Manufacturer Shenzhen Fuman
Package SOT-23-6
Category Power Management ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD (operating range) VDD 1.5 10 V -40℃≤TA≤85℃ 4
Overcharge protection delay TOC (tolerance) TOC -30 30 % VDD=3.6V, 4.4V 4
Overdischarge protection threshold VOD (tolerance) VOD -0.075 2.4 0.075 V 4
Overdischarge protection threshold VOD (tolerance, -40℃≤TA≤85℃) VOD -0.105 2.4 0.105 V -40℃≤TA≤85℃ 4
Overdischarge recovery threshold VODR (tolerance) VODR -0.075 3 0.075 V 4
Overdischarge recovery threshold VODR (tolerance, -40℃≤TA≤85℃) VODR -0.105 3 0.105 V -40℃≤TA≤85℃ 4
Overdischarge protection delay TOD (tolerance) TOD -30 30 % VDD=3.6V, 2.4V 4
Overcurrent discharge protection threshold VEDI (tolerance) VEDI -0.02 0.2 0.02 V 4
Overcurrent discharge protection delay TEDI (tolerance) TEDI -30 30 % 4
Overcurrent discharge recovery delay TEDIR TEDIR 1.4 2 2.6 ms 4
Battery short-circuit protection threshold VSHORT VSHORT 0.82 1.36 1.75 V VM 端电压 4
Battery short-circuit protection delay TSHORT TSHORT 200 400 600 us 4
Charger detection voltage VCHG VCHG -0.27 -0.5 -0.86 V VDD=3.0V 4
VM pull-up resistance to VDD RVMD RVMD 100 300 900 kΩ VDD=1.8V,VM=0V 4
VM pull-down resistance to VSS RVMS RVMS 15 30 45 kΩ 4
DOUT output-low level (VDD=2.0V) DOUT 0.2 0.4 V VDD=2.0V,IDOUT=10μA 4
Supply current IDD IDD 2.5 6 uA VDD =3.9V 4
Low-power mode quiescent current IPDWN IPDWN 0.8 1 uA VDD=2.0V 5
Absolute max supply voltage VDD VDD -0.3 10 V 3
Absolute max DOUT input voltage -0.3 V 3
Operating temperature TA TA -40 85 ℃ 3
Junction temperature 150 ℃ 3
Storage temperature -65 150 ℃ 3
Soldering temperature (tin soldering, 10 s) 260 ℃ 锡焊,10秒 3
External resistor R2 recommended minimum R2 500 Ω 9
External resistor R2 recommended maximum R2 2.2 kΩ 9
External resistor R1 recommended maximum R1 1 kΩ 9
Overcharge protection delay TOC (typical) TOC 110 ms 3
Overdischarge protection delay TOD (typical) TOD 55 ms 3
Overcurrent discharge protection delay TEDI (typical) TEDI 7 ms 3
COUT output-low pulldown resistance 4 MΩ 4
0V charge allow voltage threshold VOV_CHG VOV_CHG 1.2 V 充电器电压 5
0V charge inhibit threshold VOV_INH VOV_INH 1.2 V VM=-2.0V 5
External resistor R1 recommended value R1 330 Ω 9
Thermal resistance junction-to-ambient θJA θJA 200 ℃/W SOT23-6封装 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: FM2119H
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: fm2119h-etched.step / fm2119h-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); fm2119h.step / fm2119h.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Shenzhen Fuman datasheet (10 pp, sha256 8ca5b0c9916a6b29, retrieved 2026-11-13, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF