Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

XL3085

XINLUDA · RS-485 / RS-422 ICs · SOP-8

XL3085 from XINLUDA, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receive output; the datasheet states the receiver output goes logic high when the receiver input is open or shorted (fail-safe).
2 RE input Receive enable terminal, active low; the datasheet states the receive output is high-resistance when DE is high.
3 DE input Transmit enable, active high; when DE is low the transmit output is high-resistance.
4 DI input Transmit data input; when DE is high the chip operates in transmit state, and the datasheet's description for the DE-low case is garbled in the extracted text.
5 GND power_in Ground reference for the device.
6 L1 bidirectional Receive input / transmit output of the differential bus pair; the datasheet uses L1 as the A port in its illustrations.
7 L2 bidirectional Receive input / transmit output of the differential bus pair; the datasheet uses L2 as the B port in its illustrations.
8 Vcc power_in Supply pin; the DC characteristics give an operating voltage range of 4.5 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer XINLUDA
Package SOP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Control input voltage (DE, RE) VCC 6 V 4
Drive input voltage (DI) -0.5 6 V 4
Drive output voltage (L1, L2) -0.5 6 V 4
Receive input voltage (L1, L2) -7 12 V 4
Receive output voltage (RO) -7 12 V 4
Operating Temperature Range TSTG -55 150 ℃ 4
Maximum Operating Temperature Range TOP -40 85 ℃ 4
Continuous power consumption, 8-pin moulded SOP 725 mW above +70°C 4
Soldering Temperature 300 ℃ 10 seconds 4
Operating Voltage Range Vcc 4.5 5.5 V 5
Driver differential output (without load) VOD1 5 V without load 5
Driver differential output (with load) VOD2 1.5 V figure 1, R=54Ω or R=27Ω 5
Driver Differential Output Voltage amplitude of change ∆VOD 0.2 V 5
Driver Common Mode Output Voltage VOC 1 3 V 5
Driver Common Mode Output Voltage amplitude of change ∆VOC 0.2 V 5
Input High Voltage VIH 2 V DE, RE, DI 5
Input Low Voltage VIL 0.8 V DE, RE, DI 5
Input current IIN1 -2 2 uA DE, RE, DI 5
Input current IIN2 40 90 uA DE=0V, Vcc=5V, VIN=5V 5
Input current IIN2 60 100 uA DE=0V, Vcc=5V, VIN=0V 5
Receiver differential input threshold voltage VTH -100 100 mV -7V ≤ VCM ≤ +12V 5
Receiver output high VOH 4 V IO=-8mA 5
Receiver output low level VOL 0.4 V IO=8mA 5
Receiver terminal tri-state (high resistance) output current IOZR 1 uA 0.4V ≤ Vo ≤ 2.4V 5
Receiver Input Impedance RIN 96 kΩ -7V ≤ VCM ≤ +12V 5
No Load Supply Current ICC 480 600 uA unloaded, RE=DI=GND or Vcc, DE = Vcc 5
No Load Supply Current ICC 450 600 uA DE=GND 5
Receiver output short-circuit current IOSR 95 mA 0V ≤ VRO ≤ VCC 5
ESD Protection L1, L2 Pins, Human Body Mode -8 15 kV 5
Drive Input to Output (low-to-high) tDPLH 250 1000 nS figure 3 and figure 5, RDIFF=50Ω, CL1=CL2=100pF 6
Drive Input to Output (high-to-low) tDPHL 250 1000 nS 6
Drive Output Offset tDSKEW -100 -3 100 nS 6
Drive Rise Time tDR 200 750 nS 6
Drive Fall Time tDF 200 750 nS 6
Driver enable to output high tDZH 2500 nS figure 4 and figure 6, CL=100pF, S2 close 6
Drive enable to output low tDZL 2500 nS figure 4 and figure 6, CL=100pF, S1 close 6
Drive low to off tDLZ 100 nS figure 4 and figure 6, CL=15pF, S1 close 6
Driver high to off tDHZ 100 nS figure 4 and figure 6, CL=15pF, S2 close 6
Receiver Input to Output (low-to-high) tRPLH 200 nS figure 7 and figure 9, /VID/ ≥ 2.0V; VID rise/fall time ≤15nS 6
Receiver Input to Output (high-to-low) tRPHL 200 nS 6
Differential Receiver Offset tRSKEW -30 3 30 nS 6
Receiver enable to output low tRZL 20 50 nS figure 2 and figure 8, CL=100pF, S1 close 6
Receiver enable to output high tRZH 20 50 nS figure 2 and figure 8, CL=100pF, S2 close 6
Receiver low to off tRLZ 20 50 nS figure 2 and figure 8, CL=100pF, S1 close 6
Receiver high to off tRHZ 20 50 nS figure 2 and figure 8, CL=100pF, S2 close 6
Driver output short-circuit current IOD 150 mA Short circuit current between L1/L2 6
Maximum Data Speed fMAX 250 500 Kbps 6
Infinitely switchable flip-flop wait time Ts 10 65 150 ms DE=RE=0, RO is low 6

CAD (KiCad official)

  • Symbol: XL3085
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: xl3085-etched.step / xl3085-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); xl3085.step / xl3085.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: XINLUDA datasheet (12 pp, sha256 697655214874cb36, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF