3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownXL3085
XINLUDA · RS-485 / RS-422 ICs · SOP-8
XL3085 from XINLUDA, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receive output; the datasheet states the receiver output goes logic high when the receiver input is open or shorted (fail-safe). |
| 2 | RE | input | Receive enable terminal, active low; the datasheet states the receive output is high-resistance when DE is high. |
| 3 | DE | input | Transmit enable, active high; when DE is low the transmit output is high-resistance. |
| 4 | DI | input | Transmit data input; when DE is high the chip operates in transmit state, and the datasheet's description for the DE-low case is garbled in the extracted text. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | L1 | bidirectional | Receive input / transmit output of the differential bus pair; the datasheet uses L1 as the A port in its illustrations. |
| 7 | L2 | bidirectional | Receive input / transmit output of the differential bus pair; the datasheet uses L2 as the B port in its illustrations. |
| 8 | Vcc | power_in | Supply pin; the DC characteristics give an operating voltage range of 4.5 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XINLUDA |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Control input voltage (DE, RE) | VCC | 6 | V | 4 | |||
| Drive input voltage (DI) | -0.5 | 6 | V | 4 | |||
| Drive output voltage (L1, L2) | -0.5 | 6 | V | 4 | |||
| Receive input voltage (L1, L2) | -7 | 12 | V | 4 | |||
| Receive output voltage (RO) | -7 | 12 | V | 4 | |||
| Operating Temperature Range | TSTG | -55 | 150 | ℃ | 4 | ||
| Maximum Operating Temperature Range | TOP | -40 | 85 | ℃ | 4 | ||
| Continuous power consumption, 8-pin moulded SOP | 725 | mW | above +70°C | 4 | |||
| Soldering Temperature | 300 | ℃ | 10 seconds | 4 | |||
| Operating Voltage Range | Vcc | 4.5 | 5.5 | V | 5 | ||
| Driver differential output (without load) | VOD1 | 5 | V | without load | 5 | ||
| Driver differential output (with load) | VOD2 | 1.5 | V | figure 1, R=54Ω or R=27Ω | 5 | ||
| Driver Differential Output Voltage amplitude of change | ∆VOD | 0.2 | V | 5 | |||
| Driver Common Mode Output Voltage | VOC | 1 | 3 | V | 5 | ||
| Driver Common Mode Output Voltage amplitude of change | ∆VOC | 0.2 | V | 5 | |||
| Input High Voltage | VIH | 2 | V | DE, RE, DI | 5 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, RE, DI | 5 | ||
| Input current | IIN1 | -2 | 2 | uA | DE, RE, DI | 5 | |
| Input current | IIN2 | 40 | 90 | uA | DE=0V, Vcc=5V, VIN=5V | 5 | |
| Input current | IIN2 | 60 | 100 | uA | DE=0V, Vcc=5V, VIN=0V | 5 | |
| Receiver differential input threshold voltage | VTH | -100 | 100 | mV | -7V ≤ VCM ≤ +12V | 5 | |
| Receiver output high | VOH | 4 | V | IO=-8mA | 5 | ||
| Receiver output low level | VOL | 0.4 | V | IO=8mA | 5 | ||
| Receiver terminal tri-state (high resistance) output current | IOZR | 1 | uA | 0.4V ≤ Vo ≤ 2.4V | 5 | ||
| Receiver Input Impedance | RIN | 96 | kΩ | -7V ≤ VCM ≤ +12V | 5 | ||
| No Load Supply Current | ICC | 480 | 600 | uA | unloaded, RE=DI=GND or Vcc, DE = Vcc | 5 | |
| No Load Supply Current | ICC | 450 | 600 | uA | DE=GND | 5 | |
| Receiver output short-circuit current | IOSR | 95 | mA | 0V ≤ VRO ≤ VCC | 5 | ||
| ESD Protection L1, L2 Pins, Human Body Mode | -8 | 15 | kV | 5 | |||
| Drive Input to Output (low-to-high) | tDPLH | 250 | 1000 | nS | figure 3 and figure 5, RDIFF=50Ω, CL1=CL2=100pF | 6 | |
| Drive Input to Output (high-to-low) | tDPHL | 250 | 1000 | nS | 6 | ||
| Drive Output Offset | tDSKEW | -100 | -3 | 100 | nS | 6 | |
| Drive Rise Time | tDR | 200 | 750 | nS | 6 | ||
| Drive Fall Time | tDF | 200 | 750 | nS | 6 | ||
| Driver enable to output high | tDZH | 2500 | nS | figure 4 and figure 6, CL=100pF, S2 close | 6 | ||
| Drive enable to output low | tDZL | 2500 | nS | figure 4 and figure 6, CL=100pF, S1 close | 6 | ||
| Drive low to off | tDLZ | 100 | nS | figure 4 and figure 6, CL=15pF, S1 close | 6 | ||
| Driver high to off | tDHZ | 100 | nS | figure 4 and figure 6, CL=15pF, S2 close | 6 | ||
| Receiver Input to Output (low-to-high) | tRPLH | 200 | nS | figure 7 and figure 9, /VID/ ≥ 2.0V; VID rise/fall time ≤15nS | 6 | ||
| Receiver Input to Output (high-to-low) | tRPHL | 200 | nS | 6 | |||
| Differential Receiver Offset | tRSKEW | -30 | 3 | 30 | nS | 6 | |
| Receiver enable to output low | tRZL | 20 | 50 | nS | figure 2 and figure 8, CL=100pF, S1 close | 6 | |
| Receiver enable to output high | tRZH | 20 | 50 | nS | figure 2 and figure 8, CL=100pF, S2 close | 6 | |
| Receiver low to off | tRLZ | 20 | 50 | nS | figure 2 and figure 8, CL=100pF, S1 close | 6 | |
| Receiver high to off | tRHZ | 20 | 50 | nS | figure 2 and figure 8, CL=100pF, S2 close | 6 | |
| Driver output short-circuit current | IOD | 150 | mA | Short circuit current between L1/L2 | 6 | ||
| Maximum Data Speed | fMAX | 250 | 500 | Kbps | 6 | ||
| Infinitely switchable flip-flop wait time | Ts | 10 | 65 | 150 | ms | DE=RE=0, RO is low | 6 |
CAD (KiCad official)
- Symbol:
XL3085 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
xl3085-etched.step/xl3085-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);xl3085.step/xl3085.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XINLUDA datasheet (12 pp, sha256
697655214874cb36, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).