3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownSMA3107-TL-E
onsemi · RF Amplifiers · SOT-363-6
SMA3107-TL-E from onsemi, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply pin with a recommended operating range of 2.7 V to 3.3 V (typ. 3 V) and an absolute maximum rating of 5 V. |
| 2 | GND | power_in | Ground pin; the test circuit requires pins 2, 4 and 5 to be connected to GND. |
| 3 | OUT | output | RF output port with a 50 Ω port impedance. |
| 4 | GND | power_in | Ground pin; the test circuit requires pins 2, 4 and 5 to be connected to GND. |
| 5 | GND | power_in | Ground pin; the test circuit requires pins 2, 4 and 5 to be connected to GND. |
| 6 | IN | input | RF input port with a 50 Ω port impedance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-363-6 |
| Category | Radio Frequency Chip/Antenna |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 2.7 | 3 | 3.3 | V | 2 | |
| Operating Ambient Temperature | Topr | -40 | 25 | 85 | °C | 2 | |
| Supply Voltage | VCC | 5 | V | 1 | |||
| Circuit Current | ICC | 15 | mA | 1 | |||
| Allowable Power Dissipation | PD | 280 | mW | 1 | |||
| Operating Temperature | Topr | -40 | 85 | °C | 1 | ||
| Storage Temperature | Tstg | -55 | 150 | °C | 1 | ||
| Circuit Current | ICC | 4.3 | 6 | 7.7 | mA | 2 | |
| Power Gain | Gp | 21 | 23.5 | 26 | dB | f=1GHz | 2 |
| Power Gain | Gp | 22 | 24.5 | 27 | dB | f=2.2GHz | 2 |
| Isolation | ISL | 33 | 38 | dB | f=1GHz | 2 | |
| Isolation | ISL | 40 | 45 | dB | f=2.2GHz | 2 | |
| Input Return Loss | RLin | 18 | 23 | dB | f=1GHz | 2 | |
| Input Return Loss | RLin | 10 | 13 | dB | f=2.2GHz | 2 | |
| Output Return Loss | RLout | 27 | 32 | dB | f=1GHz | 2 | |
| Output Return Loss | RLout | 10 | 13 | dB | f=2.2GHz | 2 | |
| Noise Figure | NF | 3.1 | 4.3 | dB | f=1GHz | 2 | |
| Noise Figure | NF | 3.6 | 4.3 | dB | f=2.2GHz | 2 | |
| Gain 1dB Compression Output Power | Po(1dB) | -10 | -8 | dBm | f=1GHz | 2 | |
| Gain 1dB Compression Output Power | Po(1dB) | -11.5 | -9.5 | dBm | f=2.2GHz | 2 | |
| Upper Limit Operating Frequency | fu | 2.8 | GHz | 3dB down below fl at gain at f=1GHz | 2 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
SMA3107-TL-E - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SOT-363-6, generated on the KiCad land (body 1.6 x 2 mm, terminals on the pads, 0.85 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sma3107-tl-e-etched.step/sma3107-tl-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sma3107-tl-e.step/sma3107-tl-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (7 pp, sha256
9a5c28b26b8bf613, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).