main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sma3107-tl-e: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sma3107-tl-e-etched.glb sma3107-tl-e: factory component page (tier=mfr) · Ray
sma3107-tl-e-etched.step sma3107-tl-e: factory component page (tier=mfr) · Ray
sma3107-tl-e-hero.glb sma3107-tl-e: hero GLB from the etched model (keeps the MPN mark) · Ray
sma3107-tl-e-hero.overlay.json sma3107-tl-e: hero GLB from the etched model (keeps the MPN mark) · Ray
sma3107-tl-e.glb Publish 0.1.0 · Ray
sma3107-tl-e.kicad_mod Publish 0.1.0 · Ray
sma3107-tl-e.kicad_sym Publish 0.1.0 · Ray
sma3107-tl-e.lbr Publish 0.1.0 · Ray
sma3107-tl-e.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

SMA3107-TL-E

onsemi · RF Amplifiers · SOT-363-6

SMA3107-TL-E from onsemi, in a SOT-363-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VCC power_in Supply pin with a recommended operating range of 2.7 V to 3.3 V (typ. 3 V) and an absolute maximum rating of 5 V.
2 GND power_in Ground pin; the test circuit requires pins 2, 4 and 5 to be connected to GND.
3 OUT output RF output port with a 50 Ω port impedance.
4 GND power_in Ground pin; the test circuit requires pins 2, 4 and 5 to be connected to GND.
5 GND power_in Ground pin; the test circuit requires pins 2, 4 and 5 to be connected to GND.
6 IN input RF input port with a 50 Ω port impedance.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOT-363-6
Category Radio Frequency Chip/Antenna
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 2.7 3 3.3 V 2
Operating Ambient Temperature Topr -40 25 85 °C 2
Supply Voltage VCC 5 V 1
Circuit Current ICC 15 mA 1
Allowable Power Dissipation PD 280 mW 1
Operating Temperature Topr -40 85 °C 1
Storage Temperature Tstg -55 150 °C 1
Circuit Current ICC 4.3 6 7.7 mA 2
Power Gain Gp 21 23.5 26 dB f=1GHz 2
Power Gain Gp 22 24.5 27 dB f=2.2GHz 2
Isolation ISL 33 38 dB f=1GHz 2
Isolation ISL 40 45 dB f=2.2GHz 2
Input Return Loss RLin 18 23 dB f=1GHz 2
Input Return Loss RLin 10 13 dB f=2.2GHz 2
Output Return Loss RLout 27 32 dB f=1GHz 2
Output Return Loss RLout 10 13 dB f=2.2GHz 2
Noise Figure NF 3.1 4.3 dB f=1GHz 2
Noise Figure NF 3.6 4.3 dB f=2.2GHz 2
Gain 1dB Compression Output Power Po(1dB) -10 -8 dBm f=1GHz 2
Gain 1dB Compression Output Power Po(1dB) -11.5 -9.5 dBm f=2.2GHz 2
Upper Limit Operating Frequency fu 2.8 GHz 3dB down below fl at gain at f=1GHz 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: SMA3107-TL-E
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SOT-363-6, generated on the KiCad land (body 1.6 x 2 mm, terminals on the pads, 0.85 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sma3107-tl-e-etched.step / sma3107-tl-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sma3107-tl-e.step / sma3107-tl-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (7 pp, sha256 9a5c28b26b8bf613, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF