3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownUCC12041QDVERQ1
TEXAS INSTRUMENTS · Global Sourcing Parts · SOIC-16-300mil
UCC12041QDVERQ1 from TEXAS INSTRUMENTS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable pin: forcing EN low disables the device, and it must be pulled high to enable normal device functionality. |
| 2 | GNDP | power_in | Power ground return connection for VINP, and the reference for the 10-µF ceramic capacitor on VINP (pin 3). |
| 3 | VINP | power_in | Primary-side input supply voltage pin; a 10-µF ceramic capacitor to GNDP (pin 2) placed close to the device pins is required. |
| 4 | SYNC | input | Synchronous clock input that synchronizes multiple devices, or is connected to GNDP for standalone operation on the internal oscillator; if left open it must be kept separate from switching noise to avoid false clock coupling. |
| 5 | SYNC_OK | output | Active-low, open-drain diagnostic output that is asserted LOW when there is no external SYNC clock or the clock is outside the operating range, and is high-impedance when a clock is applied on SYNC. |
| 6 | NC | unconnected | Internally connected to pins 7 and 8 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board. |
| 7 | NC | unconnected | Internally connected to pins 6 and 8 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board. |
| 8 | NC | unconnected | Internally connected to pins 6 and 7 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board. |
| 9 | GNDS | power_in | Connect to the GNDS plane on the printed circuit board; it must not be used as the only ground connection for VISO, and pin 15 must be connected to circuit ground. |
| 10 | NC | unconnected | No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board. |
| 11 | NC | unconnected | No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board. |
| 12 | NC | unconnected | No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board. |
| 13 | SEL | input | VISO setpoint select: shorted to VISO gives 5.0 V, 5.4 V through a 100-kΩ resistor to VISO, shorted to GNDS gives 3.3 V, and 3.7 V through a 100-kΩ resistor to GNDS; it is sampled during power-up. |
| 14 | VISO | power_out | Isolated supply voltage output; a 10-µF ceramic capacitor to GNDS (pin 15) placed close to the device pins is required. |
| 15 | GNDS | power_in | Secondary-side ground return connection for VISO; the VISO bypass capacitor connects from VISO to this pin, and it must be connected to circuit ground. |
| 16 | GNDS | power_in | Secondary-side ground pin shown as GNDS in the typical application figure; Table 5-1 gives no separate function text for this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TEXAS INSTRUMENTS |
| Package | SOIC-16-300mil |
| Category | Global Sourcing Parts |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VINP to GNDP voltage | -0.3 | 6 | V | Over operating free-air temperature range (unless otherwise noted) | 4 | ||
| EN, SYNC, SYNC_OK to GNDP voltage | -0.3 | 6 | V | Printed upper limit VINP + 0.3, ≤ 6.0 V; 6.0 stored | 4 | ||
| VISO to GNDS voltage | -0.3 | 6 | V | Over operating free-air temperature range (unless otherwise noted) | 4 | ||
| SEL to GNDS voltage | -0.3 | 6 | V | Printed upper limit VISO + 0.3, ≤ 6.0 V; 6.0 stored | 4 | ||
| VISO output power at Ta = 25°C | POUT_MAX | 675 | mW | Ta = 25°C | 4 | ||
| Operating junction temperature range | TJ | -40 | 150 | °C | 4 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| VINP primary side supply voltage | VINP | 4.5 | 5 | 5.5 | V | Over operating free-air temperature range | 4 |
| EN pin input voltage | VEN | 0 | 5.5 | V | Over operating free-air temperature range | 4 | |
| SYNC pin input voltage | VSYNC | 0 | 5.5 | V | Over operating free-air temperature range | 4 | |
| SYNC_OK open-drain pin voltage | VSYNC-OK | 0 | 5.5 | V | Over operating free-air temperature range | 4 | |
| Isolated power supply voltage | VISO | 0 | 5.7 | V | Over operating free-air temperature range | 4 | |
| SEL input voltage | VSEL | 0 | 5.7 | V | Over operating free-air temperature range | 4 | |
| External DC/DC converter synchronization signal frequency | fSYNC | 14.4 | 16 | 17.6 | MHz | Over operating free-air temperature range | 4 |
| Ambient temperature | Ta | -40 | 125 | °C | Over operating free-air temperature range | 4 | |
| Junction temperature | TJ | -40 | 150 | °C | Over operating free-air temperature range | 4 | |
| VINP quiescent current, disabled | IVINQ | 100 | uA | EN=LOW | 7 | ||
| VINP operating current, no load | IVINO | 52 | 80 | mA | EN=HI; SEL shorted to VISO (5.0-V output) | 7 | |
| VINP operating current, no load | IVINO | 48 | 70 | mA | EN=HI; SEL 100 kΩ to VISO (5.4-V output) | 7 | |
| VINP operating current, no load | IVINO | 96 | 140 | mA | EN=HI; SEL shorted to GNDS (3.3-V output) | 7 | |
| VINP operating current, no load | IVINO | 82 | 120 | mA | EN=HI; SEL 100 kΩ to GNDS (3.7-V output) | 7 | |
| DC current from VINP supply under short circuit on VISO | IVIN_SC | 245 | mA | VISO short to GNDS | 7 | ||
| VINP under-voltage lockout rising threshold | VUVPR | 4.25 | 4.45 | V | 7 | ||
| VINP under-voltage lockout falling threshold | VUVPF | 3.5 | 3.75 | V | 7 | ||
| Input voltage threshold, logic HIGH | VIR | 2.2 | V | Rising edge | 7 | ||
| Input voltage threshold, logic LOW | VIF | 0.8 | V | Falling edge | 7 | ||
| Enable pin input current | IEN | 5 | 10 | uA | VEN = 5.0 V | 7 | |
| SYNC pin input current | ISYNC | 0.02 | 1 | uA | VSYNC = 5.0 V | 7 | |
| SYNC_OK output low voltage | VOL | 0.15 | V | ISYNC_OK = -2 mA | 7 | ||
| SYNC_OK pin leakage current | ILKG_SYNC_OK | 1 | uA | VSYNC_OK = 5.0 V | 7 | ||
| Isolated supply output voltage (5.0-V output) | VISO | 4.8 | 5 | 5.2 | V | SEL shorted to VISO (5.0-V output); IISO = 55 mA | 7 |
| Isolated supply output voltage (5.4-V output) | VISO | 5.18 | 5.4 | 5.62 | V | SEL 100 kΩ to VISO (5.4-V output); IISO = 45 mA | 7 |
| Isolated supply output voltage (3.3-V output) | VISO | 3.17 | 3.3 | 3.43 | V | SEL shorted to GNDS (3.3-V output); IISO = 100 mA | 7 |
| Isolated supply output voltage (3.7-V output) | VISO | 3.55 | 3.7 | 3.85 | V | SEL 100kΩ to GNDS (3.7-V output); IISO = 90 mA | 7 |
| Voltage ripple on isolated supply output (pk-pk), 5.0-V output | VISO(RIP) | 50 | mV | 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to VISO (5.0-V output); IISO = 100 mA | 7 | ||
| Voltage ripple on isolated supply output (pk-pk), 5.4-V output | VISO(RIP) | 50 | mV | 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL 100 kΩ to VISO (5.4-V output); IISO = 90 mA | 7 | ||
| Voltage ripple on isolated supply output (pk-pk), 3.3-V output | VISO(RIP) | 50 | mV | 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to GNDS (3.3-V output); IISO = 145 mA | 7 | ||
| Voltage ripple on isolated supply output (pk-pk), 3.7-V output | VISO(RIP) | 50 | mV | 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to GNDS (3.7-V output); IISO = 130 mA | 7 | ||
| VISO DC line regulation, 5.0-V output | VISO(LINE) | 1 | % | SEL shorted to VISO (5.0-V output); IISO = 55 mA, VINP = 4.5 V to 5.5 V | 7 | ||
| VISO DC line regulation, 3.3-V output | VISO(LINE) | 1 | % | SEL shorted to GNDS (3.3-V output); IISO = 100 mA, VINP = 4.5 V to 5.5 V | 7 | ||
| VISO DC load regulation, 5.0-V output | VISO(LOAD) | 1.5 | % | SEL shorted to VISO (5.0-V output); IISO = 0 to 100 mA | 8 | ||
| VISO DC load regulation, 3.3-V output | VISO(LOAD) | 1.5 | % | SEL shorted to GNDS (3.3-V output); IISO = 0 to 145 mA | 8 | ||
| Efficiency at maximum recommended load, 5.0-V output | EFF | 60 | % | SEL shorted to VISO (5.0-V output); IISO = 100 mA | 8 | ||
| Efficiency at maximum recommended load, 5.4-V output | EFF | 60 | % | SEL 100 kΩ to VISO (5.4-V output); IISO = 90 mA | 8 | ||
| Efficiency at maximum recommended load, 3.3-V output | EFF | 50 | % | SEL shorted to GNDS (3.3-V output); IISO = 145 mA | 8 | ||
| Efficiency at maximum recommended load, 3.7-V output | EFF | 53 | % | SEL 100 kΩ to GNDS (3.7-V output); IISO = 130 mA | 8 | ||
| VISO rise time, 10%-90%, 5.0-V output | tRISE | 750 | 1000 | µs | EN = change from LO to HI, SEL shorted to VISO (5.0-V output); IISO = 1 mA | 8 | |
| VISO rise time, 10%-90%, 3.3-V output (as printed) | tRISE | 300 | 500 | µs | EN = change from LO to HI, SEL 100 kΩ to GNDS (3.3-V output); IISO = 1 mA | 8 | |
| Static common-mode transient immunity | CMTI | 100 | V/ns | Slew rate of GNDP versus GNDS, VCM = 1000 V | 8 | ||
| DC/DC converter internal clock frequency | fSW_INT | 8 | MHz | Internal clock mode | 8 | ||
| Junction-to-ambient thermal resistance | RθJA | 57.5 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 21.6 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 33.8 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 10.2 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 33.7 | °C/W | 4 | |||
| Thermal shutdown threshold | TSDTHR | 165 | °C | Junction temperature, rising | 8 | ||
| Thermal shutdown hysteresis | TSDHYST | 27 | °C | Junction temperature, falling | 8 | ||
| VINP under-voltage lockout hysteresis | VUVPH | 0.5 | V | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | respective GND pins. Ensure that enough copper (preferably a connection to the ground plane) is present on | 23 |
CAD (KiCad official)
- Symbol:
UCC12041QDVERQ1 - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
ucc12041qdverq1-etched.step/ucc12041qdverq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc12041qdverq1.step/ucc12041qdverq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TEXAS INSTRUMENTS datasheet (32 pp, sha256
63c5b55c385c58f5, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).