Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

UCC12041QDVERQ1

TEXAS INSTRUMENTS · Global Sourcing Parts · SOIC-16-300mil

UCC12041QDVERQ1 from TEXAS INSTRUMENTS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Enable pin: forcing EN low disables the device, and it must be pulled high to enable normal device functionality.
2 GNDP power_in Power ground return connection for VINP, and the reference for the 10-µF ceramic capacitor on VINP (pin 3).
3 VINP power_in Primary-side input supply voltage pin; a 10-µF ceramic capacitor to GNDP (pin 2) placed close to the device pins is required.
4 SYNC input Synchronous clock input that synchronizes multiple devices, or is connected to GNDP for standalone operation on the internal oscillator; if left open it must be kept separate from switching noise to avoid false clock coupling.
5 SYNC_OK output Active-low, open-drain diagnostic output that is asserted LOW when there is no external SYNC clock or the clock is outside the operating range, and is high-impedance when a clock is applied on SYNC.
6 NC unconnected Internally connected to pins 7 and 8 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board.
7 NC unconnected Internally connected to pins 6 and 8 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board.
8 NC unconnected Internally connected to pins 6 and 7 with no other electrical connection; belongs to the primary-side voltage domain and is to be connected to GNDP on the printed circuit board.
9 GNDS power_in Connect to the GNDS plane on the printed circuit board; it must not be used as the only ground connection for VISO, and pin 15 must be connected to circuit ground.
10 NC unconnected No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board.
11 NC unconnected No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board.
12 NC unconnected No internal connection; belongs to the isolated voltage domain and is to be connected to GNDS on the printed circuit board.
13 SEL input VISO setpoint select: shorted to VISO gives 5.0 V, 5.4 V through a 100-kΩ resistor to VISO, shorted to GNDS gives 3.3 V, and 3.7 V through a 100-kΩ resistor to GNDS; it is sampled during power-up.
14 VISO power_out Isolated supply voltage output; a 10-µF ceramic capacitor to GNDS (pin 15) placed close to the device pins is required.
15 GNDS power_in Secondary-side ground return connection for VISO; the VISO bypass capacitor connects from VISO to this pin, and it must be connected to circuit ground.
16 GNDS power_in Secondary-side ground pin shown as GNDS in the typical application figure; Table 5-1 gives no separate function text for this pin.

Key specifications

Parameter Value
Manufacturer TEXAS INSTRUMENTS
Package SOIC-16-300mil
Category Global Sourcing Parts
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VINP to GNDP voltage -0.3 6 V Over operating free-air temperature range (unless otherwise noted) 4
EN, SYNC, SYNC_OK to GNDP voltage -0.3 6 V Printed upper limit VINP + 0.3, ≤ 6.0 V; 6.0 stored 4
VISO to GNDS voltage -0.3 6 V Over operating free-air temperature range (unless otherwise noted) 4
SEL to GNDS voltage -0.3 6 V Printed upper limit VISO + 0.3, ≤ 6.0 V; 6.0 stored 4
VISO output power at Ta = 25°C POUT_MAX 675 mW Ta = 25°C 4
Operating junction temperature range TJ -40 150 °C 4
Storage temperature Tstg -65 150 °C 4
VINP primary side supply voltage VINP 4.5 5 5.5 V Over operating free-air temperature range 4
EN pin input voltage VEN 0 5.5 V Over operating free-air temperature range 4
SYNC pin input voltage VSYNC 0 5.5 V Over operating free-air temperature range 4
SYNC_OK open-drain pin voltage VSYNC-OK 0 5.5 V Over operating free-air temperature range 4
Isolated power supply voltage VISO 0 5.7 V Over operating free-air temperature range 4
SEL input voltage VSEL 0 5.7 V Over operating free-air temperature range 4
External DC/DC converter synchronization signal frequency fSYNC 14.4 16 17.6 MHz Over operating free-air temperature range 4
Ambient temperature Ta -40 125 °C Over operating free-air temperature range 4
Junction temperature TJ -40 150 °C Over operating free-air temperature range 4
VINP quiescent current, disabled IVINQ 100 uA EN=LOW 7
VINP operating current, no load IVINO 52 80 mA EN=HI; SEL shorted to VISO (5.0-V output) 7
VINP operating current, no load IVINO 48 70 mA EN=HI; SEL 100 kΩ to VISO (5.4-V output) 7
VINP operating current, no load IVINO 96 140 mA EN=HI; SEL shorted to GNDS (3.3-V output) 7
VINP operating current, no load IVINO 82 120 mA EN=HI; SEL 100 kΩ to GNDS (3.7-V output) 7
DC current from VINP supply under short circuit on VISO IVIN_SC 245 mA VISO short to GNDS 7
VINP under-voltage lockout rising threshold VUVPR 4.25 4.45 V 7
VINP under-voltage lockout falling threshold VUVPF 3.5 3.75 V 7
Input voltage threshold, logic HIGH VIR 2.2 V Rising edge 7
Input voltage threshold, logic LOW VIF 0.8 V Falling edge 7
Enable pin input current IEN 5 10 uA VEN = 5.0 V 7
SYNC pin input current ISYNC 0.02 1 uA VSYNC = 5.0 V 7
SYNC_OK output low voltage VOL 0.15 V ISYNC_OK = -2 mA 7
SYNC_OK pin leakage current ILKG_SYNC_OK 1 uA VSYNC_OK = 5.0 V 7
Isolated supply output voltage (5.0-V output) VISO 4.8 5 5.2 V SEL shorted to VISO (5.0-V output); IISO = 55 mA 7
Isolated supply output voltage (5.4-V output) VISO 5.18 5.4 5.62 V SEL 100 kΩ to VISO (5.4-V output); IISO = 45 mA 7
Isolated supply output voltage (3.3-V output) VISO 3.17 3.3 3.43 V SEL shorted to GNDS (3.3-V output); IISO = 100 mA 7
Isolated supply output voltage (3.7-V output) VISO 3.55 3.7 3.85 V SEL 100kΩ to GNDS (3.7-V output); IISO = 90 mA 7
Voltage ripple on isolated supply output (pk-pk), 5.0-V output VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to VISO (5.0-V output); IISO = 100 mA 7
Voltage ripple on isolated supply output (pk-pk), 5.4-V output VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL 100 kΩ to VISO (5.4-V output); IISO = 90 mA 7
Voltage ripple on isolated supply output (pk-pk), 3.3-V output VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to GNDS (3.3-V output); IISO = 145 mA 7
Voltage ripple on isolated supply output (pk-pk), 3.7-V output VISO(RIP) 50 mV 20-MHz bandwidth, CLOAD = 10 uF // 0.1 uF, SEL shorted to GNDS (3.7-V output); IISO = 130 mA 7
VISO DC line regulation, 5.0-V output VISO(LINE) 1 % SEL shorted to VISO (5.0-V output); IISO = 55 mA, VINP = 4.5 V to 5.5 V 7
VISO DC line regulation, 3.3-V output VISO(LINE) 1 % SEL shorted to GNDS (3.3-V output); IISO = 100 mA, VINP = 4.5 V to 5.5 V 7
VISO DC load regulation, 5.0-V output VISO(LOAD) 1.5 % SEL shorted to VISO (5.0-V output); IISO = 0 to 100 mA 8
VISO DC load regulation, 3.3-V output VISO(LOAD) 1.5 % SEL shorted to GNDS (3.3-V output); IISO = 0 to 145 mA 8
Efficiency at maximum recommended load, 5.0-V output EFF 60 % SEL shorted to VISO (5.0-V output); IISO = 100 mA 8
Efficiency at maximum recommended load, 5.4-V output EFF 60 % SEL 100 kΩ to VISO (5.4-V output); IISO = 90 mA 8
Efficiency at maximum recommended load, 3.3-V output EFF 50 % SEL shorted to GNDS (3.3-V output); IISO = 145 mA 8
Efficiency at maximum recommended load, 3.7-V output EFF 53 % SEL 100 kΩ to GNDS (3.7-V output); IISO = 130 mA 8
VISO rise time, 10%-90%, 5.0-V output tRISE 750 1000 µs EN = change from LO to HI, SEL shorted to VISO (5.0-V output); IISO = 1 mA 8
VISO rise time, 10%-90%, 3.3-V output (as printed) tRISE 300 500 µs EN = change from LO to HI, SEL 100 kΩ to GNDS (3.3-V output); IISO = 1 mA 8
Static common-mode transient immunity CMTI 100 V/ns Slew rate of GNDP versus GNDS, VCM = 1000 V 8
DC/DC converter internal clock frequency fSW_INT 8 MHz Internal clock mode 8
Junction-to-ambient thermal resistance RθJA 57.5 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 21.6 °C/W 4
Junction-to-board thermal resistance RθJB 33.8 °C/W 4
Junction-to-top characterization parameter ψJT 10.2 °C/W 4
Junction-to-board characterization parameter ψJB 33.7 °C/W 4
Thermal shutdown threshold TSDTHR 165 °C Junction temperature, rising 8
Thermal shutdown hysteresis TSDHYST 27 °C Junction temperature, falling 8
VINP under-voltage lockout hysteresis VUVPH 0.5 V 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper respective GND pins. Ensure that enough copper (preferably a connection to the ground plane) is present on 23

CAD (KiCad official)

  • Symbol: UCC12041QDVERQ1
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: ucc12041qdverq1-etched.step / ucc12041qdverq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc12041qdverq1.step / ucc12041qdverq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TEXAS INSTRUMENTS datasheet (32 pp, sha256 63c5b55c385c58f5, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF