Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL3283EIHZ-T

Intersil(Renesas Electronics) · RS-485/RS-422 ICs · SOT-23-6

ISL3283EIHZ-T from Intersil(Renesas Electronics), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VCC power_in System power supply input, 3.0V to 5.5V.
2 GND power_in Ground connection.
3 RO output Receiver output: RO is high if A - B ≥ -50mV, low if A - B ≤ -200mV, and high if A and B are unconnected (floating) or shorted.
4 B input ±16.5kV IEC61000 ESD protected RS-485/RS-422 level inverting receiver input.
5 RE input Active-low receiver output enable: RO is enabled when RE is low and high-impedance when RE is high; if the enable function is not used, connect it directly to GND or through a 1kΩ or greater resistor to VCC.
6 A input ±16.5kV IEC61000 ESD protected RS-485/RS-422 level noninverting receiver input.

Key specifications

Parameter Value
Manufacturer Intersil(Renesas Electronics)
Package SOT-23-6
Category Interface ICs
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input High Voltage (RE, RE), VCC condition 1 VIH1 2 V VL = VCC if ISL3282E; VCC 3.6V (symbol lost in extraction; as printed) 5
Input High Voltage (RE, RE), VCC condition 2 VIH2 2.4 V VCC 5.5V (symbol lost in extraction; as printed) 5
Input Low Voltage (RE, RE) VIL1 0.7 V VL = VCC if ISL3282E 5
Logic Input Current IIN1 -15 15 µA RE = RE = 0V or VCC 5
Input Current (A, B) IIN2 80 125 µA VCC = 0V, 3.6V, or 5.5V; VIN = 12V 5
Input Current (A, B) IIN2 -100 -50 µA VCC = 0V, 3.6V, or 5.5V; VIN = -7V 5
Receiver Differential Threshold Voltage VTH -200 -125 -50 mV -7V <= VCM <= 12V 5
Receiver Input Hysteresis VTH 15 mV VCM = 0V, 25°C 5
Receiver Input Resistance RIN 150 kΩ -7V <= VCM <= 12V 5
Receiver Short-Circuit Current IOSR 7 30 85 mA 0V <= VO <= VCC; printed as ±7 / ±30 / ±85 5
Receiver Output Low Voltage VOL1 0.2 0.4 V IO = 4mA, VID = -200mV 6
Three-state (high impedance) Receiver Output Current IOZR -1 0.015 1 µA 0V <= VO <= VCC 6
No-Load Supply Current ICC 400 500 µA RE/RE = VCC/0V 6
Shutdown Supply Current ISHDN 20 µA RE/RE = 0V/VCC 6
ESD RS-485 pins, IEC61000-4-2 Air-Gap Discharge -16.5 16.5 kV 25°C; printed as ±16.5 6
ESD RS-485 pins, IEC61000-4-2 Contact Discharge -9 9 kV 25°C; printed as ±9 6
ESD Human Body Model, bus pins to GND -16.5 16.5 kV 25°C; printed as ±16.5 6
ESD All Pins HBM, per MIL-STD-883 Method 3015 -5 5 kV 25°C; printed as ±5 6
ESD Machine Model (MM) -250 250 V 25°C; printed as ±250 6
Maximum Data Rate fMAX 20 Mbps VID = ±2V, VCM = 0V (Figure 4 and Table 2) 6
Receiver Input to Output Delay tPLH, tPHL 20 36 60 ns VID = ±2V, VCM = 0V (Figure 4) 6
Receiver Skew /tPLH - tPHL/ (3.3V) tSK1 1 5.5 ns VCC = 3.3V ±10% (Figure 4) 6
Receiver Skew /tPLH - tPHL/ (5V) tSK2 2 7.5 ns VCC = 5V ±10% (Figure 4) 6
Receiver Enable to Output High tZH 500 ns RL = 1kΩ, CL = 15pF, SW = GND (Figure 5) 6
Receiver Enable to Output Low tZL 500 ns RL = 1kΩ, CL = 15pF, SW = VCC (Figure 5) 6
Receiver Disable from Output High tHZ 10 20 ns RL = 1kΩ, CL = 15pF, SW = GND (Figure 5) 6
Receiver Disable from Output Low tLZ 10 20 ns RL = 1kΩ, CL = 15pF, SW = VCC (Figure 5) 6
Supply voltage VCC VCC 3 5.5 V Electrical test conditions range 5
Operating temperature range, I suffix -40 85 °C I Suffix (ISL3283EIHZ-T) 5
VCC to GND -0.3 7 V 5
Input voltage RE, RE -0.3 7 V 5
Input/Output voltage A, B -8 13 V 5
Output voltage RO -0.3 V RO (Not ISL3282E, ISL3284E); printed max is VCC +0.3V 5
Maximum Junction Temperature (Plastic Package) 150 °C 5
Maximum Storage Temperature Range -65 150 °C 5
Thermal Resistance junction-to-ambient, 6 Ld SOT-23 θJA 177 °C/W Typical; Note 5 (high-effective thermal conductivity test board, free air) 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ISL3283EIHZ-T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: isl3283eihz-t-etched.step / isl3283eihz-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl3283eihz-t.step / isl3283eihz-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Intersil(Renesas Electronics) datasheet (16 pp, sha256 64b2f463d8a4c737, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF