Generated by kicad-footprint-generator · KiCad file format 20260206
ISL3283EIHZ-T
Intersil(Renesas Electronics) · RS-485/RS-422 ICs · SOT-23-6
ISL3283EIHZ-T from Intersil(Renesas Electronics), in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | System power supply input, 3.0V to 5.5V. |
| 2 | GND | power_in | Ground connection. |
| 3 | RO | output | Receiver output: RO is high if A - B ≥ -50mV, low if A - B ≤ -200mV, and high if A and B are unconnected (floating) or shorted. |
| 4 | B | input | ±16.5kV IEC61000 ESD protected RS-485/RS-422 level inverting receiver input. |
| 5 | RE | input | Active-low receiver output enable: RO is enabled when RE is low and high-impedance when RE is high; if the enable function is not used, connect it directly to GND or through a 1kΩ or greater resistor to VCC. |
| 6 | A | input | ±16.5kV IEC61000 ESD protected RS-485/RS-422 level noninverting receiver input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOT-23-6 |
| Category | Interface ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input High Voltage (RE, RE), VCC condition 1 | VIH1 | 2 | V | VL = VCC if ISL3282E; VCC 3.6V (symbol lost in extraction; as printed) | 5 | ||
| Input High Voltage (RE, RE), VCC condition 2 | VIH2 | 2.4 | V | VCC 5.5V (symbol lost in extraction; as printed) | 5 | ||
| Input Low Voltage (RE, RE) | VIL1 | 0.7 | V | VL = VCC if ISL3282E | 5 | ||
| Logic Input Current | IIN1 | -15 | 15 | µA | RE = RE = 0V or VCC | 5 | |
| Input Current (A, B) | IIN2 | 80 | 125 | µA | VCC = 0V, 3.6V, or 5.5V; VIN = 12V | 5 | |
| Input Current (A, B) | IIN2 | -100 | -50 | µA | VCC = 0V, 3.6V, or 5.5V; VIN = -7V | 5 | |
| Receiver Differential Threshold Voltage | VTH | -200 | -125 | -50 | mV | -7V <= VCM <= 12V | 5 |
| Receiver Input Hysteresis | VTH | 15 | mV | VCM = 0V, 25°C | 5 | ||
| Receiver Input Resistance | RIN | 150 | kΩ | -7V <= VCM <= 12V | 5 | ||
| Receiver Short-Circuit Current | IOSR | 7 | 30 | 85 | mA | 0V <= VO <= VCC; printed as ±7 / ±30 / ±85 | 5 |
| Receiver Output Low Voltage | VOL1 | 0.2 | 0.4 | V | IO = 4mA, VID = -200mV | 6 | |
| Three-state (high impedance) Receiver Output Current | IOZR | -1 | 0.015 | 1 | µA | 0V <= VO <= VCC | 6 |
| No-Load Supply Current | ICC | 400 | 500 | µA | RE/RE = VCC/0V | 6 | |
| Shutdown Supply Current | ISHDN | 20 | µA | RE/RE = 0V/VCC | 6 | ||
| ESD RS-485 pins, IEC61000-4-2 Air-Gap Discharge | -16.5 | 16.5 | kV | 25°C; printed as ±16.5 | 6 | ||
| ESD RS-485 pins, IEC61000-4-2 Contact Discharge | -9 | 9 | kV | 25°C; printed as ±9 | 6 | ||
| ESD Human Body Model, bus pins to GND | -16.5 | 16.5 | kV | 25°C; printed as ±16.5 | 6 | ||
| ESD All Pins HBM, per MIL-STD-883 Method 3015 | -5 | 5 | kV | 25°C; printed as ±5 | 6 | ||
| ESD Machine Model (MM) | -250 | 250 | V | 25°C; printed as ±250 | 6 | ||
| Maximum Data Rate | fMAX | 20 | Mbps | VID = ±2V, VCM = 0V (Figure 4 and Table 2) | 6 | ||
| Receiver Input to Output Delay | tPLH, tPHL | 20 | 36 | 60 | ns | VID = ±2V, VCM = 0V (Figure 4) | 6 |
| Receiver Skew /tPLH - tPHL/ (3.3V) | tSK1 | 1 | 5.5 | ns | VCC = 3.3V ±10% (Figure 4) | 6 | |
| Receiver Skew /tPLH - tPHL/ (5V) | tSK2 | 2 | 7.5 | ns | VCC = 5V ±10% (Figure 4) | 6 | |
| Receiver Enable to Output High | tZH | 500 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 5) | 6 | ||
| Receiver Enable to Output Low | tZL | 500 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 5) | 6 | ||
| Receiver Disable from Output High | tHZ | 10 | 20 | ns | RL = 1kΩ, CL = 15pF, SW = GND (Figure 5) | 6 | |
| Receiver Disable from Output Low | tLZ | 10 | 20 | ns | RL = 1kΩ, CL = 15pF, SW = VCC (Figure 5) | 6 | |
| Supply voltage VCC | VCC | 3 | 5.5 | V | Electrical test conditions range | 5 | |
| Operating temperature range, I suffix | -40 | 85 | °C | I Suffix (ISL3283EIHZ-T) | 5 | ||
| VCC to GND | -0.3 | 7 | V | 5 | |||
| Input voltage RE, RE | -0.3 | 7 | V | 5 | |||
| Input/Output voltage A, B | -8 | 13 | V | 5 | |||
| Output voltage RO | -0.3 | V | RO (Not ISL3282E, ISL3284E); printed max is VCC +0.3V | 5 | |||
| Maximum Junction Temperature (Plastic Package) | 150 | °C | 5 | ||||
| Maximum Storage Temperature Range | -65 | 150 | °C | 5 | |||
| Thermal Resistance junction-to-ambient, 6 Ld SOT-23 | θJA | 177 | °C/W | Typical; Note 5 (high-effective thermal conductivity test board, free air) | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ISL3283EIHZ-T - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
isl3283eihz-t-etched.step/isl3283eihz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);isl3283eihz-t.step/isl3283eihz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Intersil(Renesas Electronics) datasheet (16 pp, sha256
64b2f463d8a4c737, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).