main
Ray
Publish 0.1.0
6c51bdd
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241
{
"slug": "isl3283eihz-t",
"version": "0.1.0",
"type": "component",
"description": "Intersil(Renesas Electronics) RS-485/RS-422 ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"isl3283eihz-t",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"isl3283eihz-t.kicad_sym",
"isl3283eihz-t.kicad_mod",
"isl3283eihz-t.glb",
"isl3283eihz-t.step",
"isl3283eihz-t.lbr",
"docs/hero.png",
"docs/isl3283eihz-t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"isl3283eihz-t-hero.glb",
"isl3283eihz-t-hero.overlay.json"
],
"component": {
"mpn": "ISL3283EIHZ-T",
"manufacturer": "Intersil(Renesas Electronics)",
"package": "SOT-23-6",
"pin_count": 6,
"category": "Interface ICs",
"subcategory": "RS-485/RS-422 ICs",
"datasheet": "https://www.renesas.com/us/en/document/dst/isl3280e-isl3281e-isl3282e-isl3283e-isl3284e-isl3285e-datasheet",
"parts": {
"symbol": "isl3283eihz-t.kicad_sym",
"footprint": "isl3283eihz-t.kicad_mod",
"model_3d": "isl3283eihz-t-hero.glb",
"model_3d_plain": "isl3283eihz-t.glb",
"model_3d_step": "isl3283eihz-t-etched.step",
"model_3d_step_plain": "isl3283eihz-t.step",
"lbr": "isl3283eihz-t.lbr"
},
"distributor_links": {
"lcsc": "C152396",
"digikey": "ISL3283EIHZ-TTR-ND",
"mouser": "968-ISL3283EIHZ-T"
},
"distributor_check": {
"checked_at": "2026-11-13T03:48:00Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "ISL3283EIHZ-TTR-ND",
"status": "found"
},
"mouser": {
"pn": "968-ISL3283EIHZ-T",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "VCC",
"type": "power_in",
"description": "System power supply input, 3.0V to 5.5V."
},
{
"number": "2",
"name": "GND",
"type": "power_in",
"description": "Ground connection."
},
{
"number": "3",
"name": "RO",
"type": "output",
"description": "Receiver output: RO is high if A - B ≥ -50mV, low if A - B ≤ -200mV, and high if A and B are unconnected (floating) or shorted."
},
{
"number": "4",
"name": "B",
"type": "input",
"description": "±16.5kV IEC61000 ESD protected RS-485/RS-422 level inverting receiver input."
},
{
"number": "5",
"name": "RE",
"type": "input",
"description": "Active-low receiver output enable: RO is enabled when RE is low and high-impedance when RE is high; if the enable function is not used, connect it directly to GND or through a 1kΩ or greater resistor to VCC."
},
{
"number": "6",
"name": "A",
"type": "input",
"description": "±16.5kV IEC61000 ESD protected RS-485/RS-422 level noninverting receiver input."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin numbers were inferred from the flattened text of the 6 LD SOT-23 top-view drawing for ISL3283E o; The datasheet uses an overbar for the active-low enable (RE); the extracted text lost the overbar, s; The Figure 1 and Figure 2 circuit labels for the 6-pin variants list pin numbers in a different orde"
],
"pages_sent": 16,
"cost_usd": 0.0067,
"at": "2026-11-13T03:47:49"
},
"datasheet": {
"url": "https://www.renesas.com/us/en/document/dst/isl3280e-isl3281e-isl3282e-isl3283e-isl3284e-isl3285e-datasheet",
"pages": 16,
"sha256": "64b2f463d8a4c737",
"source_tier": "mfr"
},
"cad": "land: KiCad official (CC-BY-SA 4.0); 3D: generated from the datasheet",
"model_3d_generated": {
"generator": "factory/gen_pkg3d.py",
"family": "SOT",
"height_mm": 1.45,
"height_basis": "datasheet A, max",
"standoff_mm": 0.05,
"standoff_basis": "family nominal (no datasheet A1 read)",
"lead_width_mm": 0.36,
"lead_width_basis": "default: 0.6 x pad width across the lead, at most 0.45 x pitch 0.95 mm; a tab 0.9 x its width (no datasheet b read)",
"lead_thickness_mm": 0.172,
"lead_thickness_basis": "default for pitch 0.95 mm, height 1.45 mm (no datasheet c read)"
},
"pins": {
"total": 6,
"described": 6,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "isl3283eihz-t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.45
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "0c341f1421e1ff9c1d9b02cbcab3827d5163af528b9f4499ba20d5462cb1f043",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "isl3283eihz-t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.8,
2.9,
1.45
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "202ef00206b18a2118f06b329a944904a4854826b4d6fdb6ff5b3ed9270366bc",
"checked": "2026-11-13",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "P6.064",
"source_page": 14,
"D": {
"nom_mm": 2.9,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 1.6,
"range_mm": [
null,
null
]
},
"E": {
"nom_mm": 2.8,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.95,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.45,
"range_mm": [
null,
1.45
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "isl3283eihz-t.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}