3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC32MM0064GPL028-I/SS
Microchip Tech · MICROCHIP · SSOP-28-208mil
PIC32MM0064GPL028-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR | input | Master Clear input (Schmitt trigger); pulling it low generates a device Reset and it is also used for device programming and debugging. |
| 2 | VREF+/AN0/RP1/OCM1E/INT3/RA0 | power_in | ADC and DAC positive reference input, also ADC analog input channel AN0 and digital I/O RA0. |
| 3 | VREF-/AN1/RP2/OCM1F/RA1 | power_in | ADC negative reference input, also ADC analog input channel AN1 and digital I/O RA1. |
| 4 | PGED1/AN2/C1IND/C2INB/RP14/RB0 | bidirectional | ICSP Port 1 programming data (Schmitt trigger/digital I/O), also ADC analog input AN2, comparator inputs C1IND/C2INB and remappable RP14/RB0. |
| 5 | PGEC1/AN3/C1INC/C2INA/RP15/RB1 | input | ICSP Port 1 programming clock input (Schmitt trigger), also ADC analog input AN3, comparator inputs C1INC/C2INA and remappable RP15/RB1. |
| 6 | AN4/C1INB/RP16/RB2 | bidirectional | ADC analog input channel AN4, also comparator 1 input B, remappable RP16 and digital I/O RB2. |
| 7 | AN11/C1INA/RB3 | bidirectional | ADC analog input channel AN11, also comparator 1 input A and digital I/O RB3. |
| 8 | VSS | power_in | Digital modules ground; VSS and AVSS are internally connected. |
| 9 | OSC1/CLKI/AN5/RP3/OCM1C/RA2 | input | Primary oscillator crystal input, or external clock (EC mode) input CLKI; also ADC analog input AN5, remappable RP3 and digital I/O RA2. |
| 10 | OSC2/CLKO/AN6/RP4/OCM1D/RA3(1) | output | Primary oscillator crystal output, or system clock output CLKO; also ADC analog input AN6, remappable RP4 and digital I/O RA3, which has increased current drive strength (see Section 26.0). |
| 11 | SOSCI/RP5/RB4 | passive | Secondary oscillator crystal input, also remappable RP5 and digital I/O RB4. |
| 12 | SOSCO/SCLKI/RP6/PWRLCLK/RA4 | passive | Secondary oscillator crystal output, also secondary oscillator external clock input SCLKI, 50/60 Hz real-time clock input PWRLCLK, remappable RP6 and digital I/O RA4. |
| 13 | VDD | power_in | Digital modules power supply; VDD and AVDD are internally connected and the device operates from 2.0V to 3.6V. |
| 14 | PGED3/RB5 | bidirectional | ICSP Port 3 programming data (Schmitt trigger/digital I/O) and digital I/O RB5. |
| 15 | PGEC3/RB6 | input | ICSP Port 3 programming clock input (Schmitt trigger) and digital I/O RB6. |
| 16 | RP11/RB7 | bidirectional | Remappable peripheral pin RP11 (input or output) and digital I/O RB7. |
| 17 | TCK/RP7/U1CTS/SCK1/OCM1A/RB8(1) | input | JTAG clock input (Schmitt trigger), also remappable RP7, UART1 CTS, SPI1 clock, MCCP1 output A and digital I/O RB8, which has increased current drive strength (see Section 26.0). |
| 18 | TMS/REFCLKI/RP8/T1CK/T1G/U1RTS/U1BCLK/SDO1/C2OUT/OCM1B/INT2/RB9(1) | input | JTAG mode select input (Schmitt trigger), also reference clock input REFCLKI, remappable RP8, Timer1 clock/gate inputs and digital I/O RB9, which has increased current drive strength (see Section 26.0). |
| 19 | RP19/RC9 | bidirectional | Remappable peripheral pin RP19 (input or output) and digital I/O RC9. |
| 20 | VCAP | power_out | Core voltage regulator filter capacitor connection; it must not be connected to VDD and requires a 10 µF capacitor to ground (Section 2.5). |
| 21 | PGED2/TDO/RP17/RB10 | bidirectional | ICSP Port 2 programming data (Schmitt trigger/digital I/O), also JTAG data output TDO, remappable RP17 and digital I/O RB10. |
| 22 | PGEC2/TDI/RP18/RB11 | input | ICSP Port 2 programming clock input (Schmitt trigger), also JTAG data input TDI, remappable RP18 and digital I/O RB11. |
| 23 | AN7/LVDIN/RP12/RB12 | input | ADC analog input channel AN7, also High/Low-Voltage Detect input LVDIN, remappable RP12 and digital I/O RB12. |
| 24 | AN8/RP13/RB13 | input | ADC analog input channel AN8, also remappable RP13 and digital I/O RB13. |
| 25 | CDAC1/AN9/RP9/RTCC/U1TX/SDI1/C1OUT/INT1/RB14 | output | Control DAC output CDAC1 (analog), also ADC analog input AN9, RTCC alarm/seconds output, UART1 TX, SPI1 data input, comparator 1 output, INT1 and digital I/O RB14. |
| 26 | AN10/REFCLKO/RP10/U1RX/SS1/FSYNC1/INT0/RB15(1) | input | ADC analog input channel AN10, also reference clock output REFCLKO, remappable RP10, UART1 RX, SPI1 slave select, INT0 and digital I/O RB15, which has increased current drive strength (see Section 26.0). |
| 27 | VSS/AVSS | power_in | Digital and analog modules ground; VSS and AVSS are internally connected. |
| 28 | VDD/AVDD | power_in | Digital and analog modules power supply; VDD and AVDD are internally connected and the device operates from 2.0V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (operating range) | VDD | 2 | 3.6 | V | -40°C to +85°C, DC to 25 MHz | 1 | |
| Ambient operating temperature range | TA | -40 | 85 | °C | 2.0V to 3.6V, DC to 25 MHz | 1 | |
| Ambient temperature under bias | -40 | 125 | °C | 207 | |||
| Storage temperature | -65 | 150 | °C | 207 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 4 | V | 207 | ||
| Voltage on 5.5V-tolerant pin with respect to VSS | -0.3 | 4 | V | When VDD = 0V | 207 | ||
| Voltage on 5.5V-tolerant pin with respect to VSS | -0.3 | 6 | V | When VDD ≥ 2.0V | 207 | ||
| Maximum current out of VSS pin | 100 | mA | 207 | ||||
| Maximum output current sunk by I/O pin | 11 | mA | 207 | ||||
| Supply voltage VDD, BOR disabled (DC10) | VDD | 2 | 3.6 | V | BOR disabled | 209 | |
| Supply voltage, BOR enabled (DC10) | VBOR | 3.6 | V | BOR enabled | 209 | ||
| VDD rise rate to ensure internal POR (DC17A) | SVDD | 0.05 | V/ms | 0-3.3V in 66 ms, 0-2.0V in 40 ms | 209 | ||
| Brown-out Reset voltage on VDD transition, high-to-low (DC17B) | VBOR | 1.94 | 2.22 | V | 209 | ||
| Operating current DC19 | IDD | 0.45 | 0.65 | mA | VDD = 2.0V, FSYS = 1 MHz | 210 | |
| Operating current DC23 | IDD | 2.5 | 3.5 | mA | VDD = 2.0V, FSYS = 8 MHz | 210 | |
| Operating current DC24 | IDD | 7 | 9.2 | mA | VDD = 2.0V, FSYS = 25 MHz | 210 | |
| Operating current DC25A | IDD | 0.26 | 0.35 | mA | VDD = 2.0V, FSYS = 32 kHz | 210 | |
| Idle current DC40A | IIDLE | 0.26 | 0.46 | mA | VDD = 2.0V, FSYS = 1 MHz | 211 | |
| Idle current DC42A | IIDLE | 2.3 | 3.7 | mA | VDD = 2.0V, FSYS = 25 MHz | 211 | |
| Power-down current DC60 | IPD | 134 | 198 | µA | Sleep, VREGS=1, RETEN=0; -40°C; VDD 2.0V | 212 | |
| Power-down current DC60 | IPD | 136 | 208 | µA | Sleep, VREGS=1, RETEN=0; +25°C; VDD 2.0V | 212 | |
| Power-down current DC60 | IPD | 141 | 217 | µA | Sleep, VREGS=1, RETEN=0; +85°C; VDD 2.0V | 212 | |
| Power-down current DC60 | IPD | 139 | 209 | µA | Sleep, VREGS=1, RETEN=0; -40°C; VDD 3.3V | 212 | |
| Power-down current DC60 | IPD | 143 | 231 | µA | Sleep, VREGS=1, RETEN=0; +85°C; VDD 3.3V | 212 | |
| Power-down current DC61 | IPD | 35 | 55 | µA | Sleep, VREGS=0, RETEN=0 (Standby); +85°C; VDD 2.0V | 212 | |
| Power-down current DC61 | IPD | 12.7 | 36 | µA | Sleep, VREGS=0, RETEN=0 (Standby); +85°C; VDD 3.3V | 212 | |
| Input high voltage, I/O pins with ST buffer, 5V tolerant (DI20) | VIH | 5.5 | V | I/O pins with ST buffer, with 5V tolerance | 214 | ||
| Input leakage current, I/O pins 5V tolerant (DI50) | IIL | 0.1 | 1 | µA | VPIN = 3.3V, VDD = 3.3V, pin at high-impedance | 214 | |
| Input leakage current, I/O pins not 5V tolerant (DI51) | IIL | 0.1 | 1 | µA | VPIN = 3.3V, VDD = 3.3V, pin at high-impedance | 214 | |
| Input low injection current (DI60a) | IICL | 0 | -5 | mA | Applies to all pins except VDD, VSS, MCLR and VCAP | 215 | |
| Input high injection current (DI60b) | IICH | 0 | 5 | mA | Applies to all pins except VDD, VSS, MCLR, VCAP and 5V tolerant pins | 215 | |
| Total input injection current, sum of all I/O and control pins (DI60c) | IICT | -20 | 20 | mA | Absolute instantaneous sum of all input injection currents | 215 | |
| Output low voltage, I/O ports (DO10) | VOL | 0.36 | V | IOL = 6.0 mA, VDD = 3.6V | 216 | ||
| Output low voltage, I/O ports (DO10) | VOL | 0.21 | V | IOL = 3.0 mA, VDD = 2V | 216 | ||
| Output low voltage, RA3/RB8/RB9/RB15 (DO16) | VOL | 0.16 | V | IOL = 6.0 mA, VDD = 3.6V | 216 | ||
| Output low voltage, RA3/RB8/RB9/RB15 (DO16) | VOL | 0.12 | V | IOL = 3.0 mA, VDD = 2V | 216 | ||
| Output high voltage, I/O ports (DO20) | VOH | 3.25 | V | IOH = -6.0 mA, VDD = 3.6V | 216 | ||
| Output high voltage, I/O ports (DO20) | VOH | 1.4 | V | IOH = -3.0 mA, VDD = 2V | 216 | ||
| Output high voltage, RA3/RB8/RB9/RB15 (DO26) | VOH | 3.3 | V | IOH = -6.0 mA, VDD = 3.6V | 216 | ||
| Output high voltage, RA3/RB8/RB9/RB15 (DO26) | VOH | 1.55 | V | IOH = -3.0 mA, VDD = 2V | 216 | ||
| Program flash cell endurance (D130) | EP | 10000 | 20000 | E/W | 216 | ||
| VDD for in-circuit serial programming (D131) | VICSP | 3.6 | V | 216 | |||
| VDD for run-time self-programming (D132) | VRTSP | 2 | 3.6 | V | 216 | ||
| Characteristic retention (D134) | TRETD | 20 | Year | If no other specifications are violated | 216 | ||
| Operating junction temperature range | TJ | -40 | 100 | °C | 85°C rated parts | 208 | |
| Operating ambient temperature range | TA | -40 | 85 | °C | 85°C rated parts | 208 | |
| Package thermal resistance, junction to ambient, 28-pin SSOP | JA | 71 | °C/W | Junction to ambient, package simulation | 209 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | ppa | 01101 = Time base is synchronized to the INT4 pin (remappable) | 102 |
CAD (KiCad official)
- Symbol:
PIC32MM0064GPL028-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic32mm0064gpl028-i-etched.step/pic32mm0064gpl028-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic32mm0064gpl028-i.step/pic32mm0064gpl028-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (270 pp, sha256
2acc0dacc6349e28, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC32MM0064GPL028-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC32MM0064GPL028-I/SO