Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC32MM0064GPL028-I/SS

Microchip Tech · MICROCHIP · SSOP-28-208mil

PIC32MM0064GPL028-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR input Master Clear input (Schmitt trigger); pulling it low generates a device Reset and it is also used for device programming and debugging.
2 VREF+/AN0/RP1/OCM1E/INT3/RA0 power_in ADC and DAC positive reference input, also ADC analog input channel AN0 and digital I/O RA0.
3 VREF-/AN1/RP2/OCM1F/RA1 power_in ADC negative reference input, also ADC analog input channel AN1 and digital I/O RA1.
4 PGED1/AN2/C1IND/C2INB/RP14/RB0 bidirectional ICSP Port 1 programming data (Schmitt trigger/digital I/O), also ADC analog input AN2, comparator inputs C1IND/C2INB and remappable RP14/RB0.
5 PGEC1/AN3/C1INC/C2INA/RP15/RB1 input ICSP Port 1 programming clock input (Schmitt trigger), also ADC analog input AN3, comparator inputs C1INC/C2INA and remappable RP15/RB1.
6 AN4/C1INB/RP16/RB2 bidirectional ADC analog input channel AN4, also comparator 1 input B, remappable RP16 and digital I/O RB2.
7 AN11/C1INA/RB3 bidirectional ADC analog input channel AN11, also comparator 1 input A and digital I/O RB3.
8 VSS power_in Digital modules ground; VSS and AVSS are internally connected.
9 OSC1/CLKI/AN5/RP3/OCM1C/RA2 input Primary oscillator crystal input, or external clock (EC mode) input CLKI; also ADC analog input AN5, remappable RP3 and digital I/O RA2.
10 OSC2/CLKO/AN6/RP4/OCM1D/RA3(1) output Primary oscillator crystal output, or system clock output CLKO; also ADC analog input AN6, remappable RP4 and digital I/O RA3, which has increased current drive strength (see Section 26.0).
11 SOSCI/RP5/RB4 passive Secondary oscillator crystal input, also remappable RP5 and digital I/O RB4.
12 SOSCO/SCLKI/RP6/PWRLCLK/RA4 passive Secondary oscillator crystal output, also secondary oscillator external clock input SCLKI, 50/60 Hz real-time clock input PWRLCLK, remappable RP6 and digital I/O RA4.
13 VDD power_in Digital modules power supply; VDD and AVDD are internally connected and the device operates from 2.0V to 3.6V.
14 PGED3/RB5 bidirectional ICSP Port 3 programming data (Schmitt trigger/digital I/O) and digital I/O RB5.
15 PGEC3/RB6 input ICSP Port 3 programming clock input (Schmitt trigger) and digital I/O RB6.
16 RP11/RB7 bidirectional Remappable peripheral pin RP11 (input or output) and digital I/O RB7.
17 TCK/RP7/U1CTS/SCK1/OCM1A/RB8(1) input JTAG clock input (Schmitt trigger), also remappable RP7, UART1 CTS, SPI1 clock, MCCP1 output A and digital I/O RB8, which has increased current drive strength (see Section 26.0).
18 TMS/REFCLKI/RP8/T1CK/T1G/U1RTS/U1BCLK/SDO1/C2OUT/OCM1B/INT2/RB9(1) input JTAG mode select input (Schmitt trigger), also reference clock input REFCLKI, remappable RP8, Timer1 clock/gate inputs and digital I/O RB9, which has increased current drive strength (see Section 26.0).
19 RP19/RC9 bidirectional Remappable peripheral pin RP19 (input or output) and digital I/O RC9.
20 VCAP power_out Core voltage regulator filter capacitor connection; it must not be connected to VDD and requires a 10 µF capacitor to ground (Section 2.5).
21 PGED2/TDO/RP17/RB10 bidirectional ICSP Port 2 programming data (Schmitt trigger/digital I/O), also JTAG data output TDO, remappable RP17 and digital I/O RB10.
22 PGEC2/TDI/RP18/RB11 input ICSP Port 2 programming clock input (Schmitt trigger), also JTAG data input TDI, remappable RP18 and digital I/O RB11.
23 AN7/LVDIN/RP12/RB12 input ADC analog input channel AN7, also High/Low-Voltage Detect input LVDIN, remappable RP12 and digital I/O RB12.
24 AN8/RP13/RB13 input ADC analog input channel AN8, also remappable RP13 and digital I/O RB13.
25 CDAC1/AN9/RP9/RTCC/U1TX/SDI1/C1OUT/INT1/RB14 output Control DAC output CDAC1 (analog), also ADC analog input AN9, RTCC alarm/seconds output, UART1 TX, SPI1 data input, comparator 1 output, INT1 and digital I/O RB14.
26 AN10/REFCLKO/RP10/U1RX/SS1/FSYNC1/INT0/RB15(1) input ADC analog input channel AN10, also reference clock output REFCLKO, remappable RP10, UART1 RX, SPI1 slave select, INT0 and digital I/O RB15, which has increased current drive strength (see Section 26.0).
27 VSS/AVSS power_in Digital and analog modules ground; VSS and AVSS are internally connected.
28 VDD/AVDD power_in Digital and analog modules power supply; VDD and AVDD are internally connected and the device operates from 2.0V to 3.6V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD (operating range) VDD 2 3.6 V -40°C to +85°C, DC to 25 MHz 1
Ambient operating temperature range TA -40 85 °C 2.0V to 3.6V, DC to 25 MHz 1
Ambient temperature under bias -40 125 °C 207
Storage temperature -65 150 °C 207
Voltage on VDD with respect to VSS VDD -0.3 4 V 207
Voltage on 5.5V-tolerant pin with respect to VSS -0.3 4 V When VDD = 0V 207
Voltage on 5.5V-tolerant pin with respect to VSS -0.3 6 V When VDD ≥ 2.0V 207
Maximum current out of VSS pin 100 mA 207
Maximum output current sunk by I/O pin 11 mA 207
Supply voltage VDD, BOR disabled (DC10) VDD 2 3.6 V BOR disabled 209
Supply voltage, BOR enabled (DC10) VBOR 3.6 V BOR enabled 209
VDD rise rate to ensure internal POR (DC17A) SVDD 0.05 V/ms 0-3.3V in 66 ms, 0-2.0V in 40 ms 209
Brown-out Reset voltage on VDD transition, high-to-low (DC17B) VBOR 1.94 2.22 V 209
Operating current DC19 IDD 0.45 0.65 mA VDD = 2.0V, FSYS = 1 MHz 210
Operating current DC23 IDD 2.5 3.5 mA VDD = 2.0V, FSYS = 8 MHz 210
Operating current DC24 IDD 7 9.2 mA VDD = 2.0V, FSYS = 25 MHz 210
Operating current DC25A IDD 0.26 0.35 mA VDD = 2.0V, FSYS = 32 kHz 210
Idle current DC40A IIDLE 0.26 0.46 mA VDD = 2.0V, FSYS = 1 MHz 211
Idle current DC42A IIDLE 2.3 3.7 mA VDD = 2.0V, FSYS = 25 MHz 211
Power-down current DC60 IPD 134 198 µA Sleep, VREGS=1, RETEN=0; -40°C; VDD 2.0V 212
Power-down current DC60 IPD 136 208 µA Sleep, VREGS=1, RETEN=0; +25°C; VDD 2.0V 212
Power-down current DC60 IPD 141 217 µA Sleep, VREGS=1, RETEN=0; +85°C; VDD 2.0V 212
Power-down current DC60 IPD 139 209 µA Sleep, VREGS=1, RETEN=0; -40°C; VDD 3.3V 212
Power-down current DC60 IPD 143 231 µA Sleep, VREGS=1, RETEN=0; +85°C; VDD 3.3V 212
Power-down current DC61 IPD 35 55 µA Sleep, VREGS=0, RETEN=0 (Standby); +85°C; VDD 2.0V 212
Power-down current DC61 IPD 12.7 36 µA Sleep, VREGS=0, RETEN=0 (Standby); +85°C; VDD 3.3V 212
Input high voltage, I/O pins with ST buffer, 5V tolerant (DI20) VIH 5.5 V I/O pins with ST buffer, with 5V tolerance 214
Input leakage current, I/O pins 5V tolerant (DI50) IIL 0.1 1 µA VPIN = 3.3V, VDD = 3.3V, pin at high-impedance 214
Input leakage current, I/O pins not 5V tolerant (DI51) IIL 0.1 1 µA VPIN = 3.3V, VDD = 3.3V, pin at high-impedance 214
Input low injection current (DI60a) IICL 0 -5 mA Applies to all pins except VDD, VSS, MCLR and VCAP 215
Input high injection current (DI60b) IICH 0 5 mA Applies to all pins except VDD, VSS, MCLR, VCAP and 5V tolerant pins 215
Total input injection current, sum of all I/O and control pins (DI60c) IICT -20 20 mA Absolute instantaneous sum of all input injection currents 215
Output low voltage, I/O ports (DO10) VOL 0.36 V IOL = 6.0 mA, VDD = 3.6V 216
Output low voltage, I/O ports (DO10) VOL 0.21 V IOL = 3.0 mA, VDD = 2V 216
Output low voltage, RA3/RB8/RB9/RB15 (DO16) VOL 0.16 V IOL = 6.0 mA, VDD = 3.6V 216
Output low voltage, RA3/RB8/RB9/RB15 (DO16) VOL 0.12 V IOL = 3.0 mA, VDD = 2V 216
Output high voltage, I/O ports (DO20) VOH 3.25 V IOH = -6.0 mA, VDD = 3.6V 216
Output high voltage, I/O ports (DO20) VOH 1.4 V IOH = -3.0 mA, VDD = 2V 216
Output high voltage, RA3/RB8/RB9/RB15 (DO26) VOH 3.3 V IOH = -6.0 mA, VDD = 3.6V 216
Output high voltage, RA3/RB8/RB9/RB15 (DO26) VOH 1.55 V IOH = -3.0 mA, VDD = 2V 216
Program flash cell endurance (D130) EP 10000 20000 E/W 216
VDD for in-circuit serial programming (D131) VICSP 3.6 V 216
VDD for run-time self-programming (D132) VRTSP 2 3.6 V 216
Characteristic retention (D134) TRETD 20 Year If no other specifications are violated 216
Operating junction temperature range TJ -40 100 °C 85°C rated parts 208
Operating ambient temperature range TA -40 85 °C 85°C rated parts 208
Package thermal resistance, junction to ambient, 28-pin SSOP JA 71 °C/W Junction to ambient, package simulation 209

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing ppa 01101 = Time base is synchronized to the INT4 pin (remappable) 102

CAD (KiCad official)

  • Symbol: PIC32MM0064GPL028-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic32mm0064gpl028-i-etched.step / pic32mm0064gpl028-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic32mm0064gpl028-i.step / pic32mm0064gpl028-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (270 pp, sha256 2acc0dacc6349e28, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC32MM0064GPL028-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC32MM0064GPL028-I/SO