Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PI6CB33601ZLAIEX

Diodes Incorporated · Clock Buffers, Drivers · QFN-40-EP(5x5)

PI6CB33601ZLAIEX from Diodes Incorporated, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SADR_TRI input Tri-level latch input that selects the SMBus address (0, M or 1 state on first application of PD#); has an internal pull-down.
2 BW_SEL_TRI input Tri-level latch input that selects low loop bandwidth, PLL bypass or high loop bandwidth; has both internal pull-up and pull-down.
3 NC unconnected Internally connected for the feedback loop; do not connect this pin.
4 NC unconnected Internally connected for the feedback loop; do not connect this pin.
5 VDD_R power_in Power supply for the input differential buffers, 3.135 V to 3.465 V.
6 IN+ input Differential true clock input (HCSL).
7 IN- input Differential complementary clock input (HCSL).
8 GND_DIG power_in Ground for digital circuitry.
9 SCLK input CMOS SMBus clock input, 3.3 V tolerant.
10 SDATA bidirectional CMOS SMBus data line, 3.3 V tolerant.
11 VDD_DIG power_in Power supply for digital circuitry, nominal 3.3 V.
12 VDDO power_in Power supply for differential outputs, 0.95 V to 3.465 V.
13 OE0# input CMOS active-low output enable for the Q0 pair (1 = disable, 0 = enable); has an internal pull-down.
14 Q0+ output HCSL differential true clock output.
15 Q0- output HCSL differential complementary clock output.
16 VDD power_in Power supply, nominal 3.3 V.
17 VDDO power_in Power supply for differential outputs, 0.95 V to 3.465 V.
18 Q1+ output HCSL differential true clock output.
19 Q1- output HCSL differential complementary clock output.
20 NC unconnected Do not connect this pin.
21 OE1# input CMOS active-low output enable for the Q1 pair (1 = disable, 0 = enable); has an internal pull-down.
22 Q2+ output HCSL differential true clock output.
23 Q2- output HCSL differential complementary clock output.
24 OE2# input CMOS active-low output enable for the Q2 pair (1 = disable, 0 = enable); has an internal pull-down.
25 VDDA power_in Power supply for analog circuitry, 3.135 V to 3.465 V.
26 VDDO power_in Power supply for differential outputs, 0.95 V to 3.465 V.
27 Q3+ output HCSL differential true clock output.
28 Q3- output HCSL differential complementary clock output.
29 OE3# input CMOS active-low output enable for the Q3 pair (1 = disable, 0 = enable); has an internal pull-down.
30 NC unconnected Do not connect this pin.
31 VDD power_in Power supply, nominal 3.3 V.
32 VDDO power_in Power supply for differential outputs, 0.95 V to 3.465 V.
33 Q4+ output HCSL differential true clock output.
34 Q4- output HCSL differential complementary clock output.
35 OE4# input CMOS active-low output enable for the Q4 pair (1 = disable, 0 = enable); has an internal pull-down.
36 Q5+ output HCSL differential true clock output.
37 Q5- output HCSL differential complementary clock output.
38 OE5# input CMOS active-low output enable for the Q5 pair (1 = disable, 0 = enable); has an internal pull-down.
39 VDDO power_in Power supply for differential outputs, 0.95 V to 3.465 V.
40 PD# input CMOS input that samples latched inputs and starts up on first high assertion; low enters Power Down Mode, and it has an internal pull-up resistor.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package QFN-40-EP(5x5)
Category RTC/Clock Chip
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VDD, VDDA, VDD_R, VDD_DIG 3.135 3.3 3.465 V 5
Output Power Supply Voltage VDDO 0.95 3.465 V typ printed 1.05-3.3 5
Ambient Temperature TA -40 85 °C Industrial grade 5
Storage Temperature -65 150 °C 5
Supply Voltage to Ground Potential VDDxx -0.5 4.6 V 5
Input Voltage -0.5 4.6 V -0.5V to VDD+0.5V, not exceed 4.6V 5
SMBus Input High Voltage 3.6 V 5
ESD Protection (HBM) 2000 V 5
Analog Power Supply Current IDDA 21 25 mA VDDA, PLL mode, All outputs active @100MHz 5
Power Supply Current IDD 34 40 mA VDD + VDD_DIG + VDD_R, All outputs active @100MHz 5
Power Supply Current for Outputs IDDO 22 27 mA VDDO, PLL mode, All outputs active @100MHz 5
Analog Power Down Current IDDA_PD 0.5 1 mA VDDA, PLL mode, All outputs LOW/LOW 5
Power Down Current IDD_PD 1 2 mA VDD + VDD_DIG + VDD_R, All outputs LOW/LOW 5
Power Down Current for Outputs IDDO_PD 0.04 0.1 mA VDDO, All outputs LOW/LOW 5
SMBus Nominal bus voltage VDDSMB 2.7 3.6 V 6
SMBus Input High Voltage VIHSMB 2.1 3.6 V SMBus, VDDSMB = 3.3V 6
SMBus Input Low Voltage VILSMB 0.8 V SMBus, VDDSMB = 3.3V 6
SMBus sink current ISMBSINK 4 mA SMBus, at VOLSMB 6
SMBus Output Low Voltage VOLSMB 0.4 V SMBus, at ISMBSINK 6
SMBus operating frequency fMAXSMB 500 kHz Maximum frequency 6
SMBus rise time tRMSB 1000 ns (Max VIL - 0.15) to (Min VIH + 0.15) 6
SMBus fall time tFMSB 300 ns (Min VIH + 0.15) to (Max VIL - 0.15) 6
Input Mid Voltage VIM 0.4 0.5 0.6 V SADR_TRI, BW_SEL_TRI; values are multiples of VDD (0.4VDD/0.5VDD/0.6VDD) 6
Input High Voltage VIH 0.75 V Single-ended inputs, except SMBus; min 0.75 VDD, max VDD+0.3 6
Input Low Voltage VIL -0.3 0.25 V Single-ended inputs, except SMBus; max 0.25 VDD 6
Input Low Current IIL -5 µA Single-ended inputs, VIN = 0V 6
Input Low Current (pull up/down) IIL -50 µA Single-ended inputs with pull up / pull down resistor, VIN = 0V 6
Input Capacitance CIN 1.5 5 pF 6
Output enable latency tOELAT 1 3 clocks Q start after OE# assertion / Q stop after OE# deassertion 7
PD# de-assertion tPDLAT 20 300 us Differential outputs enable after PD# de-assertion 7
Diff. Input High Voltage VIHDIF 600 800 1150 mV IN+, IN-, single-end measurement 7
Diff. Input Low Voltage VILDIF -300 0 300 mV IN+, IN-, single-end measurement 7
Diff. Input Common Mode Voltage VCOM 150 900 mV 7
Diff. Input Swing Voltage VSWING 300 2900 mV Peak to peak value (VIHDIF - VILDIF) 7
Input Frequency fINBP 1 200 MHz PLL Bypass mode 7
Input Frequency 100MHz fIN100 99.9 100 100.1 MHz 100MHz PLL 7
Clock stabilization tSTAB 0.75 1 ms From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock 7
Diff. Input Leakage Current IIN -5 0.01 5 uA VIN = VDD, VIN = GND 7
Diff. Input Duty Cycle tDC 45 55 % Measured differentially 7
Output Voltage High VOH 660 784 850 mV Statistical measurement on single-ended signal using oscilloscope math function 8
Output Voltage Low VOL -150 150 mV Statistical measurement on single-ended signal using oscilloscope math function 8
Output Cross Voltage VOC 250 430 550 mV 8
PLL bandwidth high BW 1.3 3.2 3.6 MHz -3dB point in High Bandwidth Mode 8
PLL bandwidth low BW 0.7 1.7 1.9 MHz -3dB point in Low Bandwidth Mode 8
Output Skew tSKEW 21 50 ps Averaging on, VT = 50% 8
Cycle to cycle jitter tjc-c 14 50 ps PLL mode 8
Thermal Resistance Junction to Ambient θJA 29.91 °C/W Still air 17
Thermal Resistance Junction to Case θJC 15.92 °C/W 17

CAD (KiCad official)

  • Symbol: PI6CB33601ZLAIEX
  • Footprint: Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
  • 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: pi6cb33601zlaiex-etched.step / pi6cb33601zlaiex-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pi6cb33601zlaiex.step / pi6cb33601zlaiex.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (20 pp, sha256 20ed65554e2b1a98, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF