Generated by kicad-footprint-generator · KiCad file format 20260206
PI6CB33601ZLAIEX
Diodes Incorporated · Clock Buffers, Drivers · QFN-40-EP(5x5)
PI6CB33601ZLAIEX from Diodes Incorporated, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SADR_TRI | input | Tri-level latch input that selects the SMBus address (0, M or 1 state on first application of PD#); has an internal pull-down. |
| 2 | BW_SEL_TRI | input | Tri-level latch input that selects low loop bandwidth, PLL bypass or high loop bandwidth; has both internal pull-up and pull-down. |
| 3 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 4 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 5 | VDD_R | power_in | Power supply for the input differential buffers, 3.135 V to 3.465 V. |
| 6 | IN+ | input | Differential true clock input (HCSL). |
| 7 | IN- | input | Differential complementary clock input (HCSL). |
| 8 | GND_DIG | power_in | Ground for digital circuitry. |
| 9 | SCLK | input | CMOS SMBus clock input, 3.3 V tolerant. |
| 10 | SDATA | bidirectional | CMOS SMBus data line, 3.3 V tolerant. |
| 11 | VDD_DIG | power_in | Power supply for digital circuitry, nominal 3.3 V. |
| 12 | VDDO | power_in | Power supply for differential outputs, 0.95 V to 3.465 V. |
| 13 | OE0# | input | CMOS active-low output enable for the Q0 pair (1 = disable, 0 = enable); has an internal pull-down. |
| 14 | Q0+ | output | HCSL differential true clock output. |
| 15 | Q0- | output | HCSL differential complementary clock output. |
| 16 | VDD | power_in | Power supply, nominal 3.3 V. |
| 17 | VDDO | power_in | Power supply for differential outputs, 0.95 V to 3.465 V. |
| 18 | Q1+ | output | HCSL differential true clock output. |
| 19 | Q1- | output | HCSL differential complementary clock output. |
| 20 | NC | unconnected | Do not connect this pin. |
| 21 | OE1# | input | CMOS active-low output enable for the Q1 pair (1 = disable, 0 = enable); has an internal pull-down. |
| 22 | Q2+ | output | HCSL differential true clock output. |
| 23 | Q2- | output | HCSL differential complementary clock output. |
| 24 | OE2# | input | CMOS active-low output enable for the Q2 pair (1 = disable, 0 = enable); has an internal pull-down. |
| 25 | VDDA | power_in | Power supply for analog circuitry, 3.135 V to 3.465 V. |
| 26 | VDDO | power_in | Power supply for differential outputs, 0.95 V to 3.465 V. |
| 27 | Q3+ | output | HCSL differential true clock output. |
| 28 | Q3- | output | HCSL differential complementary clock output. |
| 29 | OE3# | input | CMOS active-low output enable for the Q3 pair (1 = disable, 0 = enable); has an internal pull-down. |
| 30 | NC | unconnected | Do not connect this pin. |
| 31 | VDD | power_in | Power supply, nominal 3.3 V. |
| 32 | VDDO | power_in | Power supply for differential outputs, 0.95 V to 3.465 V. |
| 33 | Q4+ | output | HCSL differential true clock output. |
| 34 | Q4- | output | HCSL differential complementary clock output. |
| 35 | OE4# | input | CMOS active-low output enable for the Q4 pair (1 = disable, 0 = enable); has an internal pull-down. |
| 36 | Q5+ | output | HCSL differential true clock output. |
| 37 | Q5- | output | HCSL differential complementary clock output. |
| 38 | OE5# | input | CMOS active-low output enable for the Q5 pair (1 = disable, 0 = enable); has an internal pull-down. |
| 39 | VDDO | power_in | Power supply for differential outputs, 0.95 V to 3.465 V. |
| 40 | PD# | input | CMOS input that samples latched inputs and starts up on first high assertion; low enters Power Down Mode, and it has an internal pull-up resistor. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | QFN-40-EP(5x5) |
| Category | RTC/Clock Chip |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD, VDDA, VDD_R, VDD_DIG | 3.135 | 3.3 | 3.465 | V | 5 | |
| Output Power Supply Voltage | VDDO | 0.95 | 3.465 | V | typ printed 1.05-3.3 | 5 | |
| Ambient Temperature | TA | -40 | 85 | °C | Industrial grade | 5 | |
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Supply Voltage to Ground Potential | VDDxx | -0.5 | 4.6 | V | 5 | ||
| Input Voltage | -0.5 | 4.6 | V | -0.5V to VDD+0.5V, not exceed 4.6V | 5 | ||
| SMBus Input High Voltage | 3.6 | V | 5 | ||||
| ESD Protection (HBM) | 2000 | V | 5 | ||||
| Analog Power Supply Current | IDDA | 21 | 25 | mA | VDDA, PLL mode, All outputs active @100MHz | 5 | |
| Power Supply Current | IDD | 34 | 40 | mA | VDD + VDD_DIG + VDD_R, All outputs active @100MHz | 5 | |
| Power Supply Current for Outputs | IDDO | 22 | 27 | mA | VDDO, PLL mode, All outputs active @100MHz | 5 | |
| Analog Power Down Current | IDDA_PD | 0.5 | 1 | mA | VDDA, PLL mode, All outputs LOW/LOW | 5 | |
| Power Down Current | IDD_PD | 1 | 2 | mA | VDD + VDD_DIG + VDD_R, All outputs LOW/LOW | 5 | |
| Power Down Current for Outputs | IDDO_PD | 0.04 | 0.1 | mA | VDDO, All outputs LOW/LOW | 5 | |
| SMBus Nominal bus voltage | VDDSMB | 2.7 | 3.6 | V | 6 | ||
| SMBus Input High Voltage | VIHSMB | 2.1 | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 | |
| SMBus Input Low Voltage | VILSMB | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 | ||
| SMBus sink current | ISMBSINK | 4 | mA | SMBus, at VOLSMB | 6 | ||
| SMBus Output Low Voltage | VOLSMB | 0.4 | V | SMBus, at ISMBSINK | 6 | ||
| SMBus operating frequency | fMAXSMB | 500 | kHz | Maximum frequency | 6 | ||
| SMBus rise time | tRMSB | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 | ||
| SMBus fall time | tFMSB | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 | ||
| Input Mid Voltage | VIM | 0.4 | 0.5 | 0.6 | V | SADR_TRI, BW_SEL_TRI; values are multiples of VDD (0.4VDD/0.5VDD/0.6VDD) | 6 |
| Input High Voltage | VIH | 0.75 | V | Single-ended inputs, except SMBus; min 0.75 VDD, max VDD+0.3 | 6 | ||
| Input Low Voltage | VIL | -0.3 | 0.25 | V | Single-ended inputs, except SMBus; max 0.25 VDD | 6 | |
| Input Low Current | IIL | -5 | µA | Single-ended inputs, VIN = 0V | 6 | ||
| Input Low Current (pull up/down) | IIL | -50 | µA | Single-ended inputs with pull up / pull down resistor, VIN = 0V | 6 | ||
| Input Capacitance | CIN | 1.5 | 5 | pF | 6 | ||
| Output enable latency | tOELAT | 1 | 3 | clocks | Q start after OE# assertion / Q stop after OE# deassertion | 7 | |
| PD# de-assertion | tPDLAT | 20 | 300 | us | Differential outputs enable after PD# de-assertion | 7 | |
| Diff. Input High Voltage | VIHDIF | 600 | 800 | 1150 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Low Voltage | VILDIF | -300 | 0 | 300 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Common Mode Voltage | VCOM | 150 | 900 | mV | 7 | ||
| Diff. Input Swing Voltage | VSWING | 300 | 2900 | mV | Peak to peak value (VIHDIF - VILDIF) | 7 | |
| Input Frequency | fINBP | 1 | 200 | MHz | PLL Bypass mode | 7 | |
| Input Frequency 100MHz | fIN100 | 99.9 | 100 | 100.1 | MHz | 100MHz PLL | 7 |
| Clock stabilization | tSTAB | 0.75 | 1 | ms | From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 | |
| Diff. Input Leakage Current | IIN | -5 | 0.01 | 5 | uA | VIN = VDD, VIN = GND | 7 |
| Diff. Input Duty Cycle | tDC | 45 | 55 | % | Measured differentially | 7 | |
| Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 |
| Output Voltage Low | VOL | -150 | 150 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 | |
| Output Cross Voltage | VOC | 250 | 430 | 550 | mV | 8 | |
| PLL bandwidth high | BW | 1.3 | 3.2 | 3.6 | MHz | -3dB point in High Bandwidth Mode | 8 |
| PLL bandwidth low | BW | 0.7 | 1.7 | 1.9 | MHz | -3dB point in Low Bandwidth Mode | 8 |
| Output Skew | tSKEW | 21 | 50 | ps | Averaging on, VT = 50% | 8 | |
| Cycle to cycle jitter | tjc-c | 14 | 50 | ps | PLL mode | 8 | |
| Thermal Resistance Junction to Ambient | θJA | 29.91 | °C/W | Still air | 17 | ||
| Thermal Resistance Junction to Case | θJC | 15.92 | °C/W | 17 |
CAD (KiCad official)
- Symbol:
PI6CB33601ZLAIEX - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
pi6cb33601zlaiex-etched.step/pi6cb33601zlaiex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi6cb33601zlaiex.step/pi6cb33601zlaiex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (20 pp, sha256
20ed65554e2b1a98, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).