Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP1630T-E

Microchip Tech · DC-DC Converters · MSOP-8

MCP1630T-E from Microchip Tech, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMP output Error amplifier output; external compensation connects from FB to COMP, and an internal clamp limits its voltage to 2.7V (typ.), setting the maximum peak switch current.
2 FB input Error amplifier inverting input that senses the output (voltage or current) for regulation using negative feedback.
3 CS input Current sense input for cycle-by-cycle peak current control (max 0.9V on MCP1630) or voltage ramp input on MCP1630V (2.7V max, common mode range VIN - 1.4V).
4 OSC IN input External oscillator input, typically from a microcontroller I/O; when high VEXT is driven low, and the high-to-low transition starts a new cycle.
5 GND power_in Circuit ground, to be connected to the analog or quiet ground plane since noise here affects the CS-to-error-amplifier comparison.
6 VEXT output External driver output that sets the power system duty cycle; drives a MOSFET driver logic input or directly the gate of a low-side N-channel MOSFET.
7 VIN power_in Input bias supply pin, normal operation 3.0V to 5.5V, with a 0.1 µF bypass capacitor to GND.
8 VREF power_in External reference voltage input used to regulate the output, ranging from 0V to VIN (rail-to-rail).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Operating Voltage VIN 3 5.5 V 6
Input Quiescent Current I(VIN) 2.8 4.5 mA IEXT = 0 mA, FOSC IN = 0 Hz 6
External Oscillator Range FOSC 1 MHz Note 1 6
Oscillator Rise Time TRISE 0.01 10 µs Note 2 6
Oscillator Fall Time TFALL 0.01 10 µs Note 2 6
Oscillator Input Voltage Low VL 0.8 V 6
Oscillator Input Voltage High VH 2 V 6
Input Offset Voltage VOS -4 0.1 4 mV 6
Error Amplifier PSRR PSRR 80 99 dB VIN = 3.0V to 5.0V, VCM = 1.2V 6
Open-loop Voltage Gain AVOL 85 95 dB RL =5k to VIN/2, 100 mV < VEAOUT < VIN, 100 mV, VCM = 1.2V 6
Error Amplifier Sink Current ISINK 5 11 mA VIN = 5V, VREF = 1.2V, VFB = 1.4V, VCOMP = 2.0V 6
Error Amplifier Source Current ISOURCE -2 -9 mA VIN = 5V, VREF = 1.2V, VFB = 1.0V, VCOMP = 2.0V, Absolute Value 6
Maximum Current Sense Signal MCP1630 VCS_MAX 0.85 0.9 0.95 V Set by maximum error amplifier clamp voltage, divided by 3. 7
Delay From CS to VEXT MCP1630 TCS_VEXT 12 25 ns 7
Minimum Duty Cycle DCMIN 0 % VFB = VREF + 0.1V, VCS = GND 7
RDSON P-channel RDSon_P 10 30 Ω 7
RDSON N-channel RDSon_N 7 30 Ω 7
VEXT Rise Time TRISE 5.9 18 ns CL = 100 pF, Typical for VIN = 3V 7
VEXT Fall Time TFALL 6.2 18 ns CL = 100 pF, Typical for VIN = 3V 7
Under Voltage Lockout UVLO 2.7 3 V VIN falling, VEXT low state when in UVLO 7
Under Voltage Lockout Hysteresis UVLO HYS 50 75 150 mV 7
Operating Junction Temperature Range TA -40 125 °C Steady state 7
Storage Temperature Range TA -65 150 °C 7
Maximum Junction Temperature TJ 150 °C Transient 7
Thermal Resistance, 8L-MSOP θJA 208 °C/W Typical 4-layer board 7
Supply Voltage VDD 6 V 6
Storage Temperature -65 150 °C 6
Maximum Junction Temperature TJ 150 °C 6
Continuous Operating Temperature Range -40 125 °C 6
ESD Protection on All Pins, HBM 3 kV HBM 6
Min. Oscillator High/Low Time TOH_MIN, TOL_MIN 10 ns 6
Oscillator Input Capacitance COSC 5 pf 6
Common Mode Rejection Ratio 80 dB VIN = 5V, VCM = 0V to 2.5V 6
Low-level Output VOL 25 mV RL = 5 k to VIN/2 6
Gain Bandwidth Product GBWP 3.5 MHz VIN = 5V 6
Current Sense Input Bias Current ICS_B -0.1 µA VIN = 5V 7
Thermal Shutdown TSHD 150 °C 7
Thermal Shutdown Hysteresis TSHD_HYS 18 °C 7

CAD (KiCad official)

  • Symbol: MCP1630T-E
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: mcp1630t-e-etched.step / mcp1630t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp1630t-e.step / mcp1630t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (30 pp, sha256 b35ca236142a63cd, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF