3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPDTC123YT
Nexperia · Digital Transistors · SOT-23
PDTC123YT from Nexperia, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | I | input | Input (base) pin, which drives the built-in bias resistor R1 (2.2 kΩ); input voltage is limited to -5 V to 12 V. |
| 2 | GND | power_in | Ground (emitter) pin; the datasheet gives no separate voltage limit for it. |
| 3 | O | output | Output (collector) pin; output current is limited to 100 mA and collector-emitter voltage to 50 V (open base). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nexperia |
| Package | SOT-23 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Collector-emitter breakdown voltage | V(BR)CBO | 50 | V | IC = 100 µA; IE = 0 A; Tamb = 25 °C | 4 | ||
| Collector-base cut-off current | ICBO | 100 | nA | VCB = 50 V; IE = 0 A; Tamb = 25 °C | 4 | ||
| Collector-emitter cut-off current | ICEO | 100 | nA | VCE = 30 V; IB = 0 A; Tamb = 25 °C | 4 | ||
| Collector-emitter cut-off current | ICEO | 5 | µA | VCE = 30 V; IB = 0 A; Tj = 150 °C | 4 | ||
| Emitter-base cut-off current | IEBO | 700 | µA | VEB = 5 V; IC = 0 A; Tamb = 25 °C | 4 | ||
| DC current gain | hFE | 35 | VCE = 5 V; IC = 5 mA; Tamb = 25 °C | 4 | |||
| Collector-emitter saturation voltage | VCEsat | 150 | mV | IC = 10 mA; IB = 0.5 mA; Tamb = 25 °C | 4 | ||
| Off-state input voltage | VI(off) | 0.75 | 0.3 | V | VCE = 5 V; IC = 100 µA; Tamb = 25 °C | 4 | |
| On-state input voltage | VI(on) | 2.5 | 1.15 | V | VCE = 300 mV; IC = 20 mA; Tamb = 25 °C | 4 | |
| Bias resistor 1 (input) | R1 | 1.54 | 2.2 | 2.86 | kΩ | 4 | |
| Bias resistor ratio | R2/R1 | 3.6 | 4.5 | 5.5 | 4 | ||
| Collector capacitance | Cc | 2 | pF | VCB = 10 V; IE = 0 A; ie = 0 A; f = 1 MHz; Tamb = 25 °C | 4 | ||
| Collector-base voltage | VCBO | 50 | V | open emitter | 2 | ||
| Collector-emitter voltage | VCEO | 50 | V | open base | 2 | ||
| Emitter-base voltage | VEBO | 5 | V | open collector | 2 | ||
| Input voltage (positive) | VI | 12 | V | positive | 2 | ||
| Input voltage (negative) | VI | -5 | V | negative | 2 | ||
| Output current | IO | 100 | mA | 2 | |||
| Peak collector current | ICM | 100 | mA | tp ≤ 1 ms; single pulse | 2 | ||
| Total power dissipation | Ptot | 250 | mW | Tamb ≤ 25 °C; device mounted on FR4 PCB, single-sided, 35 μm copper, tin-plated, standard footprint | 2 | ||
| Junction temperature | Tj | 150 | °C | 2 | |||
| Ambient temperature | Tamb | -65 | 150 | °C | 2 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 2 | ||
| Thermal resistance from junction to ambient | Rth(j-a) | 500 | K/W | in free air; device mounted on FR4 PCB, single-sided, 35 μm copper, tin-plated, standard footprint | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
PDTC123YT - Footprint:
Package_TO_SOT_SMD:SOT-23 - 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
pdtc123yt-etched.step/pdtc123yt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pdtc123yt.step/pdtc123yt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nexperia datasheet (10 pp, sha256
f882b302b0367b3f, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).