main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pdtc123yt: viewers rendered from the public page · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
pdtc123yt-etched.glb pdtc123yt: factory component page (tier=mfr) · Ray
pdtc123yt-etched.step pdtc123yt: factory component page (tier=mfr) · Ray
pdtc123yt-hero.glb pdtc123yt: hero GLB from the etched model (keeps the MPN mark) · Ray
pdtc123yt-hero.overlay.json pdtc123yt: hero GLB from the etched model (keeps the MPN mark) · Ray
pdtc123yt.glb Publish 0.1.0 · Ray
pdtc123yt.kicad_mod Publish 0.1.0 · Ray
pdtc123yt.kicad_sym Publish 0.1.0 · Ray
pdtc123yt.lbr Publish 0.1.0 · Ray
pdtc123yt.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 3 pins · Ray

PDTC123YT

Nexperia · Digital Transistors · SOT-23

PDTC123YT from Nexperia, in a SOT-23. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 I input Input (base) pin, which drives the built-in bias resistor R1 (2.2 kΩ); input voltage is limited to -5 V to 12 V.
2 GND power_in Ground (emitter) pin; the datasheet gives no separate voltage limit for it.
3 O output Output (collector) pin; output current is limited to 100 mA and collector-emitter voltage to 50 V (open base).

Key specifications

Parameter Value
Manufacturer Nexperia
Package SOT-23
Category Transistors
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Collector-emitter breakdown voltage V(BR)CBO 50 V IC = 100 µA; IE = 0 A; Tamb = 25 °C 4
Collector-base cut-off current ICBO 100 nA VCB = 50 V; IE = 0 A; Tamb = 25 °C 4
Collector-emitter cut-off current ICEO 100 nA VCE = 30 V; IB = 0 A; Tamb = 25 °C 4
Collector-emitter cut-off current ICEO 5 µA VCE = 30 V; IB = 0 A; Tj = 150 °C 4
Emitter-base cut-off current IEBO 700 µA VEB = 5 V; IC = 0 A; Tamb = 25 °C 4
DC current gain hFE 35 VCE = 5 V; IC = 5 mA; Tamb = 25 °C 4
Collector-emitter saturation voltage VCEsat 150 mV IC = 10 mA; IB = 0.5 mA; Tamb = 25 °C 4
Off-state input voltage VI(off) 0.75 0.3 V VCE = 5 V; IC = 100 µA; Tamb = 25 °C 4
On-state input voltage VI(on) 2.5 1.15 V VCE = 300 mV; IC = 20 mA; Tamb = 25 °C 4
Bias resistor 1 (input) R1 1.54 2.2 2.86 kΩ 4
Bias resistor ratio R2/R1 3.6 4.5 5.5 4
Collector capacitance Cc 2 pF VCB = 10 V; IE = 0 A; ie = 0 A; f = 1 MHz; Tamb = 25 °C 4
Collector-base voltage VCBO 50 V open emitter 2
Collector-emitter voltage VCEO 50 V open base 2
Emitter-base voltage VEBO 5 V open collector 2
Input voltage (positive) VI 12 V positive 2
Input voltage (negative) VI -5 V negative 2
Output current IO 100 mA 2
Peak collector current ICM 100 mA tp ≤ 1 ms; single pulse 2
Total power dissipation Ptot 250 mW Tamb ≤ 25 °C; device mounted on FR4 PCB, single-sided, 35 μm copper, tin-plated, standard footprint 2
Junction temperature Tj 150 °C 2
Ambient temperature Tamb -65 150 °C 2
Storage temperature Tstg -65 150 °C 2
Thermal resistance from junction to ambient Rth(j-a) 500 K/W in free air; device mounted on FR4 PCB, single-sided, 35 μm copper, tin-plated, standard footprint 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: PDTC123YT
  • Footprint: Package_TO_SOT_SMD:SOT-23
  • 3D model: SOT-23, generated on the KiCad land (body 1.3 x 2.9 mm, terminals on the pads, 1.0 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: pdtc123yt-etched.step / pdtc123yt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pdtc123yt.step / pdtc123yt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nexperia datasheet (10 pp, sha256 f882b302b0367b3f, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF