3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownJSM27511
JSMSEMI · Gate Drivers · SOT-23-6
JSM27511 from JSMSEMI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Bias supply input with recommended range 4.5 V to 20 V and absolute maximum of 25 V, with UVLO turn-on at 4.3 V typ and turn-off at 4.1 V typ. |
| 2 | OUTH | output | Sourcing current output of the driver, with 4 A typical peak source current. |
| 3 | OUTL | output | Sinking current output of the driver, with 4 A typical peak sink current. |
| 4 | GND | power_in | Ground, to which all signals are referenced. |
| 5 | IN- | input | Inverting input with 2.4 V minimum high threshold and 0.8 V maximum low threshold, input voltage range -10 V to 20 V, and a 100 kΩ internal resistor shown on the pin in the block diagram. |
| 6 | IN+ | input | Non-inverting input with 2.4 V minimum high threshold and 0.8 V maximum low threshold, input voltage range -10 V to 20 V, and a 100 kΩ internal resistor shown on the pin in the block diagram. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOT-23-6 |
| Category | Motor Driver ICs |
| Pins | 6 |
CAD (KiCad official)
- Symbol:
JSM27511 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
jsm27511-etched.step/jsm27511-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);jsm27511.step/jsm27511.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (7 pp, sha256
f0b18c248e56ac21, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).