Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

JSM27511

JSMSEMI · Gate Drivers · SOT-23-6

JSM27511 from JSMSEMI, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Bias supply input with recommended range 4.5 V to 20 V and absolute maximum of 25 V, with UVLO turn-on at 4.3 V typ and turn-off at 4.1 V typ.
2 OUTH output Sourcing current output of the driver, with 4 A typical peak source current.
3 OUTL output Sinking current output of the driver, with 4 A typical peak sink current.
4 GND power_in Ground, to which all signals are referenced.
5 IN- input Inverting input with 2.4 V minimum high threshold and 0.8 V maximum low threshold, input voltage range -10 V to 20 V, and a 100 kΩ internal resistor shown on the pin in the block diagram.
6 IN+ input Non-inverting input with 2.4 V minimum high threshold and 0.8 V maximum low threshold, input voltage range -10 V to 20 V, and a 100 kΩ internal resistor shown on the pin in the block diagram.

Key specifications

Parameter Value
Manufacturer JSMSEMI
Package SOT-23-6
Category Motor Driver ICs
Pins 6

CAD (KiCad official)

  • Symbol: JSM27511
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: jsm27511-etched.step / jsm27511-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); jsm27511.step / jsm27511.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: JSMSEMI datasheet (7 pp, sha256 f0b18c248e56ac21, retrieved 2026-10-28, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF