Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R5F5631MDDFL#V0

RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)

R5F5631MDDFL#V0 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCL passive Connect this pin to VSS via a 0.1-µF capacitor placed close to the pin.
2 MD/FINED bidirectional Operating mode setting pin whose level must not be changed during operation; also the FINE (two-line) debug interface data pin FINED.
3 RES# input Reset signal input; the LSI enters the reset state when this pin goes low.
4 P37/XTAL bidirectional General I/O port P37 or crystal resonator pin XTAL for the main clock oscillator.
5 VSS power_in Ground pin, connect to the system ground (0 V).
6 P36/EXTAL bidirectional General I/O port P36 or EXTAL pin for a crystal resonator or external clock input.
7 VCC power_in Power supply pin (2.7 to 3.6 V); connect to the system supply and bypass to VSS with a 0.1-µF capacitor close to the pin.
8 P35/NMI input Input-only port P35 or non-maskable interrupt request input NMI.
9 P31 bidirectional General I/O port P31 (5-V tolerant) with MTIOC4D/TMCI2/PO9, CTS1#/RTS1#/SS1#/SSLB0/USB0_DPUPE and IRQ1-DS functions.
10 P30 bidirectional General I/O port P30 (5-V tolerant) with MTIOC4B/TMRI3/PO8/POE8#, RXD1/SMISO1/SSCL1/MISOB/USB0_DRPD and IRQ0-DS functions.
11 P27 bidirectional General I/O port P27 with MTIOC2B/TMCI3/PO7, SCK1/RSPCKB functions, and FINE interface clock pin FINEC.
12 P26 bidirectional General I/O port P26 with MTIOC2A/TMO1/PO6, TXD1/SMOSI1/SSDA1/MOSIB/USB0_VBUSEN functions.
13 P17 bidirectional General I/O port P17 (5-V tolerant) with MTIOC3A/MTIOC3B/TIOCB0/TCLKD/TMO1/PO15/POE8#, SCK1/MISOA/SDA2-DS/IETXD and IRQ7 functions.
14 P16 bidirectional General I/O port P16 (5-V tolerant) with MTIOC3C/MTIOC3D/TXD1/MOSIA/SCL2-DS/IERXD/USB0_VBUS/USB0_VBUSEN/USB0_OVRCURB, IRQ6 and ADTRG0# functions.
15 P15 bidirectional General I/O port P15 (5-V tolerant) with MTIOC0B/MTCLKB/TIOCB2/TCLKB/TMCI2/PO13, RXD1/SMISO1/SSCL1/CRX1-DS and IRQ5 functions.
16 P14 bidirectional General I/O port P14 (5-V tolerant) with MTIOC3A/MTCLKA/TIOCB5/TCLKA/TMRI2/PO15, CTS1#/RTS1#/SS1#/CTX1/USB0_DPUPE/USB0_OVRCURA and IRQ4 functions.
17 VCC_USB power_in USB power supply pin; connect it to the VCC pin when the USB is not used.
18 USB0_DM bidirectional USB 0 transceiver D- data input/output.
19 USB0_DP bidirectional USB 0 transceiver D+ data input/output.
20 VSS_USB power_in USB ground pin; connect it to the VSS pin when the USB is not used.
21 PC7 bidirectional General I/O port PC7 with MTIOC3A/MTCLKB/TMO2/PO31, TXD8/SMOSI8/SSDA8/MISOA and IRQ14 functions.
22 PC6 bidirectional General I/O port PC6 with MTIOC3C/MTCLKA/TMCI2/PO30, RXD8/SMISO8/SSCL8/MOSIA/USB0_EXICEN and IRQ13 functions.
23 PC5 bidirectional General I/O port PC5 with MTIOC3B/MTCLKD/TMRI2/PO29, SCK8/RSPCKA/USB0_ID functions.
24 PC4 bidirectional General I/O port PC4 with MTIOC3D/MTCLKC/TMCI1/PO25/POE0#, SCK5/CTS8#/RTS8#/SS8#/SSLA0/USB0_DPRPD functions.
25 PB5/PC3 bidirectional General I/O port shared as PB5/PC3 with MTIOC2A/MTIOC1B/TIOCB4/TMRI1/PO29/POE1# timer functions.
26 PB3/PC2 bidirectional General I/O port shared as PB3/PC2 with MTIOC0A/MTIOC4A/TIOCD3/TCLKD/TMO0/PO27/POE3# and SCK6 functions.
27 PB1/PC1 bidirectional General I/O port shared as PB1/PC1 with MTIOC0C/MTIOC4C/TIOCB3/TMCI0/PO25, TXD6/SMOSI6/SSDA6 and IRQ4-DS functions.
28 VCC power_in Power supply pin (2.7 to 3.6 V); connect to the system supply.
29 PB0/PC0 bidirectional General I/O port shared as PB0/PC0 with MTIC5W/TIOCA3/PO24, RXD6/SMISO6/SSCL6/RSPCKA and IRQ12 functions.
30 VSS power_in Ground pin, connect to the system ground (0 V).
31 PA6 bidirectional General I/O port PA6 with MTIC5V/MTCLKB/TIOCA2/TMCI3/PO22/POE2#, CTS5#/RTS5#/SS5#/MOSIA functions.
32 PA4 bidirectional General I/O port PA4 with MTIC5U/MTCLKA/TIOCA1/TMRI0/PO20, TXD5/SMOSI5/SSDA5/SSLA0 and IRQ5-DS functions.
33 PA3 bidirectional General I/O port PA3 with MTIOC0D/MTCLKD/TIOCD0/TCLKB/PO19, RXD5/SMISO5/SSCL5 and IRQ6-DS functions.
34 PA1 bidirectional General I/O port PA1 with MTIOC0B/MTCLKC/TIOCB0/PO17, SCK5/SSLA2 and IRQ11 functions.
35 PE4 bidirectional General I/O port PE4 with MTIOC4D/MTIOC1A/PO28, SSLB0 and 12-bit A/D input AN012.
36 PE3 bidirectional General I/O port PE3 with MTIOC4B/PO26/POE8#, CTS12#/RTS12#/SS12#/MISOB and 12-bit A/D input AN011.
37 PE2 bidirectional General I/O port PE2 with MTIOC4A/PO23, RXD12/SMISO12/SSCL12/RXDX12/SSLB3/MOSIB, IRQ7-DS and 12-bit A/D input AN010.
38 PE1 bidirectional General I/O port PE1 with MTIOC4C/PO18, TXD12/SSDA12/TXDX12/SIOX12/SSLB2/RSPCKB and 12-bit A/D input AN009.
39 VREFL power_in Reference ground for the 10-bit A/D converter and D/A converter; set to the same potential as VSS.
40 P46 bidirectional General I/O port P46 with IRQ14-DS and 12-bit A/D input AN006.
41 VREFH power_in Reference voltage input for the 10-bit A/D converter and D/A converter; connect to VCC if neither is used.
42 P42 bidirectional General I/O port P42 with IRQ10-DS and 12-bit A/D input AN002.
43 P41 bidirectional General I/O port P41 with IRQ9-DS and 12-bit A/D input AN001.
44 VREFL0 power_in Analog reference ground for the 12-bit A/D converter; connect to VSS if the converter is not used.
45 P40 bidirectional General I/O port P40 with IRQ8-DS and 12-bit A/D input AN000.
46 VREFH0 power_in Analog reference voltage supply for the 12-bit A/D converter; connect to VCC if the converter is not used.
47 AVCC0 power_in Analog voltage supply for the 12-bit A/D converter; connect to VCC if the converter is not used.
48 AVSS0 power_in Analog ground for the 12-bit A/D converter; connect to VSS if the converter is not used.

Key specifications

Parameter Value
Manufacturer RENESAS
Package LQFP-48(7x7)
Category Single Chip Microcomputer/Microcontroller
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power supply voltage VCC, VCC_USB -0.3 4.6 V VSS = AVSS0 = VREFL/VREFL0 = VSS_USB = 0 V 130
VBATT power supply voltage VBATT -0.3 4.6 V 130
Input voltage (ports for 5 V tolerant) Vin -0.3 5.8 V 130
Input voltage (except 5 V tolerant ports) Vin -0.3 V printed as -0.3 to VCC + 0.3 V 130
Analog power supply voltage AVCC -0.3 4.6 V 130
Operating temperature, D version Topr -40 85 °C D version 130
Storage temperature Tstg -55 125 °C 130
Supply voltage range VCC 2.7 3.6 V VCC = AVCC0 = VREFH = VCC_USB 131
Output low voltage, all output pins (except RIIC, ETHERC) VOL 0.5 V IOL = 1.0 mA 132
Output low voltage, RIIC pins VOL 0.4 V IOL = 3.0 mA 132
Output low voltage, RIIC pins VOL 0.6 V IOL = 6.0 mA 132
Input leakage current, RES#, MD, EMLE, NMI Iin 1 µA Vin = 0 V, Vin = VCC 132
Three-state leakage current, other than 5 V tolerant ports ITSI 1 µA Vin = 0 V, Vin = VCC 132
Three-state leakage current, 5 V tolerant ports ITSI 5 µA Vin = 0 V, Vin = 5.5 V 132
Input pull-up MOS current Ip -300 -10 µA VCC= 2.7 to 3.6 V, Vin = 0 V 132
Input pull-down MOS current, EMLE, BSCANP Ip 10 300 µA Vin = VCC 132
Input capacitance, all input pins (except ports 12, 13, 16, 17, 20, 21, 4, C0, C1, EMLE) Cin 15 pF Vin = 0 V, f = 1 MHz, Ta = 25°C 132
Input capacitance, ports 12, 13, 16, 17, 20, 21, 4, C0, C1, EMLE Cin 30 pF Vin = 0 V, f = 1 MHz, Ta = 25°C 132
Supply current, high-speed operating mode, max ICC 100 mA ICLK = 100 MHz, PCLKA = 100MHz, PCLKB = 50 MHz, FCLK = 50 MHz, BCLK = 100MHz 133
Supply current, normal operation, peripheral clock supplied ICC 52 mA ICLK = 100 MHz 133
Supply current, normal operation, peripheral clock stopped ICC 40 mA ICLK = 100 MHz 133
Supply current, sleep mode ICC 25 65 mA ICLK = 100 MHz 133
Supply current, all-module-clock-stop mode (reference value) ICC 20 38 mA ICLK = 100 MHz 133
Supply current, increase by BGO operation ICC 15 mA 133
Supply current, low-speed operating mode 1 ICC 4 mA ICLK = 1 MHz 133
Supply current, low-speed operating mode 2 ICC 1 mA ICLK = 32.768 kHz 133
Supply current, software standby mode ICC 0.2 6 mA 133
Supply current, deep software standby, power supplied to RAM and USB resume detecting unit ICC 22 200 µA Deep software standby mode 133
Supply current, deep software standby, power not supplied to RAM/USB, POR circuit and low-power function disabled ICC 21 60 µA Deep software standby mode 133
Supply current, deep software standby, power not supplied to RAM/USB, POR circuit and low-power function enabled ICC 6.2 28 µA Deep software standby mode 133
Analog supply current during 12-bit A/D conversion (incl. temperature sensor) IAVCC0 2.3 3.2 mA 133
Analog supply current during 10-bit A/D conversion IVREFH 1 1.65 mA 133
Analog supply current during D/A conversion (per unit) IAVCC0 0.7 1 mA 133
Analog supply current waiting for A/D, D/A conversion (all units) IAVCC0 25 35 µA 133
Analog supply current, A/D, D/A converter in standby mode (all units) IAVCC0 0.1 4 µA 133
Reference supply current during 12-bit A/D conversion IVREFH0 0.6 0.7 mA 133
Reference supply current waiting for 12-bit A/D conversion (per unit) IVREFH0 0.5 0.6 mA 133
Reference supply current, 12-bit A/D converter in standby mode (per unit) IVREFH0 0.1 2 µA 133
RAM standby voltage VRAM 2.7 V 134
VCC rising gradient SrVCC 8.4 20000 µs/V 134
VCC falling gradient SfVCC 8.4 µs/V When VBATT is used 134

CAD (KiCad official)

  • Symbol: R5F5631MDDFL#V0
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: r5f5631mddfl-v0-etched.step / r5f5631mddfl-v0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r5f5631mddfl-v0.step / r5f5631mddfl-v0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS datasheet (210 pp, sha256 e7a601a78806d215, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF