Generated by kicad-footprint-generator · KiCad file format 20260206
R5F5631MDDFL#V0
RENESAS · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-48(7x7)
R5F5631MDDFL#V0 from RENESAS, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCL | passive | Connect this pin to VSS via a 0.1-µF capacitor placed close to the pin. |
| 2 | MD/FINED | bidirectional | Operating mode setting pin whose level must not be changed during operation; also the FINE (two-line) debug interface data pin FINED. |
| 3 | RES# | input | Reset signal input; the LSI enters the reset state when this pin goes low. |
| 4 | P37/XTAL | bidirectional | General I/O port P37 or crystal resonator pin XTAL for the main clock oscillator. |
| 5 | VSS | power_in | Ground pin, connect to the system ground (0 V). |
| 6 | P36/EXTAL | bidirectional | General I/O port P36 or EXTAL pin for a crystal resonator or external clock input. |
| 7 | VCC | power_in | Power supply pin (2.7 to 3.6 V); connect to the system supply and bypass to VSS with a 0.1-µF capacitor close to the pin. |
| 8 | P35/NMI | input | Input-only port P35 or non-maskable interrupt request input NMI. |
| 9 | P31 | bidirectional | General I/O port P31 (5-V tolerant) with MTIOC4D/TMCI2/PO9, CTS1#/RTS1#/SS1#/SSLB0/USB0_DPUPE and IRQ1-DS functions. |
| 10 | P30 | bidirectional | General I/O port P30 (5-V tolerant) with MTIOC4B/TMRI3/PO8/POE8#, RXD1/SMISO1/SSCL1/MISOB/USB0_DRPD and IRQ0-DS functions. |
| 11 | P27 | bidirectional | General I/O port P27 with MTIOC2B/TMCI3/PO7, SCK1/RSPCKB functions, and FINE interface clock pin FINEC. |
| 12 | P26 | bidirectional | General I/O port P26 with MTIOC2A/TMO1/PO6, TXD1/SMOSI1/SSDA1/MOSIB/USB0_VBUSEN functions. |
| 13 | P17 | bidirectional | General I/O port P17 (5-V tolerant) with MTIOC3A/MTIOC3B/TIOCB0/TCLKD/TMO1/PO15/POE8#, SCK1/MISOA/SDA2-DS/IETXD and IRQ7 functions. |
| 14 | P16 | bidirectional | General I/O port P16 (5-V tolerant) with MTIOC3C/MTIOC3D/TXD1/MOSIA/SCL2-DS/IERXD/USB0_VBUS/USB0_VBUSEN/USB0_OVRCURB, IRQ6 and ADTRG0# functions. |
| 15 | P15 | bidirectional | General I/O port P15 (5-V tolerant) with MTIOC0B/MTCLKB/TIOCB2/TCLKB/TMCI2/PO13, RXD1/SMISO1/SSCL1/CRX1-DS and IRQ5 functions. |
| 16 | P14 | bidirectional | General I/O port P14 (5-V tolerant) with MTIOC3A/MTCLKA/TIOCB5/TCLKA/TMRI2/PO15, CTS1#/RTS1#/SS1#/CTX1/USB0_DPUPE/USB0_OVRCURA and IRQ4 functions. |
| 17 | VCC_USB | power_in | USB power supply pin; connect it to the VCC pin when the USB is not used. |
| 18 | USB0_DM | bidirectional | USB 0 transceiver D- data input/output. |
| 19 | USB0_DP | bidirectional | USB 0 transceiver D+ data input/output. |
| 20 | VSS_USB | power_in | USB ground pin; connect it to the VSS pin when the USB is not used. |
| 21 | PC7 | bidirectional | General I/O port PC7 with MTIOC3A/MTCLKB/TMO2/PO31, TXD8/SMOSI8/SSDA8/MISOA and IRQ14 functions. |
| 22 | PC6 | bidirectional | General I/O port PC6 with MTIOC3C/MTCLKA/TMCI2/PO30, RXD8/SMISO8/SSCL8/MOSIA/USB0_EXICEN and IRQ13 functions. |
| 23 | PC5 | bidirectional | General I/O port PC5 with MTIOC3B/MTCLKD/TMRI2/PO29, SCK8/RSPCKA/USB0_ID functions. |
| 24 | PC4 | bidirectional | General I/O port PC4 with MTIOC3D/MTCLKC/TMCI1/PO25/POE0#, SCK5/CTS8#/RTS8#/SS8#/SSLA0/USB0_DPRPD functions. |
| 25 | PB5/PC3 | bidirectional | General I/O port shared as PB5/PC3 with MTIOC2A/MTIOC1B/TIOCB4/TMRI1/PO29/POE1# timer functions. |
| 26 | PB3/PC2 | bidirectional | General I/O port shared as PB3/PC2 with MTIOC0A/MTIOC4A/TIOCD3/TCLKD/TMO0/PO27/POE3# and SCK6 functions. |
| 27 | PB1/PC1 | bidirectional | General I/O port shared as PB1/PC1 with MTIOC0C/MTIOC4C/TIOCB3/TMCI0/PO25, TXD6/SMOSI6/SSDA6 and IRQ4-DS functions. |
| 28 | VCC | power_in | Power supply pin (2.7 to 3.6 V); connect to the system supply. |
| 29 | PB0/PC0 | bidirectional | General I/O port shared as PB0/PC0 with MTIC5W/TIOCA3/PO24, RXD6/SMISO6/SSCL6/RSPCKA and IRQ12 functions. |
| 30 | VSS | power_in | Ground pin, connect to the system ground (0 V). |
| 31 | PA6 | bidirectional | General I/O port PA6 with MTIC5V/MTCLKB/TIOCA2/TMCI3/PO22/POE2#, CTS5#/RTS5#/SS5#/MOSIA functions. |
| 32 | PA4 | bidirectional | General I/O port PA4 with MTIC5U/MTCLKA/TIOCA1/TMRI0/PO20, TXD5/SMOSI5/SSDA5/SSLA0 and IRQ5-DS functions. |
| 33 | PA3 | bidirectional | General I/O port PA3 with MTIOC0D/MTCLKD/TIOCD0/TCLKB/PO19, RXD5/SMISO5/SSCL5 and IRQ6-DS functions. |
| 34 | PA1 | bidirectional | General I/O port PA1 with MTIOC0B/MTCLKC/TIOCB0/PO17, SCK5/SSLA2 and IRQ11 functions. |
| 35 | PE4 | bidirectional | General I/O port PE4 with MTIOC4D/MTIOC1A/PO28, SSLB0 and 12-bit A/D input AN012. |
| 36 | PE3 | bidirectional | General I/O port PE3 with MTIOC4B/PO26/POE8#, CTS12#/RTS12#/SS12#/MISOB and 12-bit A/D input AN011. |
| 37 | PE2 | bidirectional | General I/O port PE2 with MTIOC4A/PO23, RXD12/SMISO12/SSCL12/RXDX12/SSLB3/MOSIB, IRQ7-DS and 12-bit A/D input AN010. |
| 38 | PE1 | bidirectional | General I/O port PE1 with MTIOC4C/PO18, TXD12/SSDA12/TXDX12/SIOX12/SSLB2/RSPCKB and 12-bit A/D input AN009. |
| 39 | VREFL | power_in | Reference ground for the 10-bit A/D converter and D/A converter; set to the same potential as VSS. |
| 40 | P46 | bidirectional | General I/O port P46 with IRQ14-DS and 12-bit A/D input AN006. |
| 41 | VREFH | power_in | Reference voltage input for the 10-bit A/D converter and D/A converter; connect to VCC if neither is used. |
| 42 | P42 | bidirectional | General I/O port P42 with IRQ10-DS and 12-bit A/D input AN002. |
| 43 | P41 | bidirectional | General I/O port P41 with IRQ9-DS and 12-bit A/D input AN001. |
| 44 | VREFL0 | power_in | Analog reference ground for the 12-bit A/D converter; connect to VSS if the converter is not used. |
| 45 | P40 | bidirectional | General I/O port P40 with IRQ8-DS and 12-bit A/D input AN000. |
| 46 | VREFH0 | power_in | Analog reference voltage supply for the 12-bit A/D converter; connect to VCC if the converter is not used. |
| 47 | AVCC0 | power_in | Analog voltage supply for the 12-bit A/D converter; connect to VCC if the converter is not used. |
| 48 | AVSS0 | power_in | Analog ground for the 12-bit A/D converter; connect to VSS if the converter is not used. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | LQFP-48(7x7) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage | VCC, VCC_USB | -0.3 | 4.6 | V | VSS = AVSS0 = VREFL/VREFL0 = VSS_USB = 0 V | 130 | |
| VBATT power supply voltage | VBATT | -0.3 | 4.6 | V | 130 | ||
| Input voltage (ports for 5 V tolerant) | Vin | -0.3 | 5.8 | V | 130 | ||
| Input voltage (except 5 V tolerant ports) | Vin | -0.3 | V | printed as -0.3 to VCC + 0.3 V | 130 | ||
| Analog power supply voltage | AVCC | -0.3 | 4.6 | V | 130 | ||
| Operating temperature, D version | Topr | -40 | 85 | °C | D version | 130 | |
| Storage temperature | Tstg | -55 | 125 | °C | 130 | ||
| Supply voltage range | VCC | 2.7 | 3.6 | V | VCC = AVCC0 = VREFH = VCC_USB | 131 | |
| Output low voltage, all output pins (except RIIC, ETHERC) | VOL | 0.5 | V | IOL = 1.0 mA | 132 | ||
| Output low voltage, RIIC pins | VOL | 0.4 | V | IOL = 3.0 mA | 132 | ||
| Output low voltage, RIIC pins | VOL | 0.6 | V | IOL = 6.0 mA | 132 | ||
| Input leakage current, RES#, MD, EMLE, NMI | Iin | 1 | µA | Vin = 0 V, Vin = VCC | 132 | ||
| Three-state leakage current, other than 5 V tolerant ports | ITSI | 1 | µA | Vin = 0 V, Vin = VCC | 132 | ||
| Three-state leakage current, 5 V tolerant ports | ITSI | 5 | µA | Vin = 0 V, Vin = 5.5 V | 132 | ||
| Input pull-up MOS current | Ip | -300 | -10 | µA | VCC= 2.7 to 3.6 V, Vin = 0 V | 132 | |
| Input pull-down MOS current, EMLE, BSCANP | Ip | 10 | 300 | µA | Vin = VCC | 132 | |
| Input capacitance, all input pins (except ports 12, 13, 16, 17, 20, 21, 4, C0, C1, EMLE) | Cin | 15 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 132 | ||
| Input capacitance, ports 12, 13, 16, 17, 20, 21, 4, C0, C1, EMLE | Cin | 30 | pF | Vin = 0 V, f = 1 MHz, Ta = 25°C | 132 | ||
| Supply current, high-speed operating mode, max | ICC | 100 | mA | ICLK = 100 MHz, PCLKA = 100MHz, PCLKB = 50 MHz, FCLK = 50 MHz, BCLK = 100MHz | 133 | ||
| Supply current, normal operation, peripheral clock supplied | ICC | 52 | mA | ICLK = 100 MHz | 133 | ||
| Supply current, normal operation, peripheral clock stopped | ICC | 40 | mA | ICLK = 100 MHz | 133 | ||
| Supply current, sleep mode | ICC | 25 | 65 | mA | ICLK = 100 MHz | 133 | |
| Supply current, all-module-clock-stop mode (reference value) | ICC | 20 | 38 | mA | ICLK = 100 MHz | 133 | |
| Supply current, increase by BGO operation | ICC | 15 | mA | 133 | |||
| Supply current, low-speed operating mode 1 | ICC | 4 | mA | ICLK = 1 MHz | 133 | ||
| Supply current, low-speed operating mode 2 | ICC | 1 | mA | ICLK = 32.768 kHz | 133 | ||
| Supply current, software standby mode | ICC | 0.2 | 6 | mA | 133 | ||
| Supply current, deep software standby, power supplied to RAM and USB resume detecting unit | ICC | 22 | 200 | µA | Deep software standby mode | 133 | |
| Supply current, deep software standby, power not supplied to RAM/USB, POR circuit and low-power function disabled | ICC | 21 | 60 | µA | Deep software standby mode | 133 | |
| Supply current, deep software standby, power not supplied to RAM/USB, POR circuit and low-power function enabled | ICC | 6.2 | 28 | µA | Deep software standby mode | 133 | |
| Analog supply current during 12-bit A/D conversion (incl. temperature sensor) | IAVCC0 | 2.3 | 3.2 | mA | 133 | ||
| Analog supply current during 10-bit A/D conversion | IVREFH | 1 | 1.65 | mA | 133 | ||
| Analog supply current during D/A conversion (per unit) | IAVCC0 | 0.7 | 1 | mA | 133 | ||
| Analog supply current waiting for A/D, D/A conversion (all units) | IAVCC0 | 25 | 35 | µA | 133 | ||
| Analog supply current, A/D, D/A converter in standby mode (all units) | IAVCC0 | 0.1 | 4 | µA | 133 | ||
| Reference supply current during 12-bit A/D conversion | IVREFH0 | 0.6 | 0.7 | mA | 133 | ||
| Reference supply current waiting for 12-bit A/D conversion (per unit) | IVREFH0 | 0.5 | 0.6 | mA | 133 | ||
| Reference supply current, 12-bit A/D converter in standby mode (per unit) | IVREFH0 | 0.1 | 2 | µA | 133 | ||
| RAM standby voltage | VRAM | 2.7 | V | 134 | |||
| VCC rising gradient | SrVCC | 8.4 | 20000 | µs/V | 134 | ||
| VCC falling gradient | SfVCC | 8.4 | µs/V | When VBATT is used | 134 |
CAD (KiCad official)
- Symbol:
R5F5631MDDFL#V0 - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
r5f5631mddfl-v0-etched.step/r5f5631mddfl-v0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r5f5631mddfl-v0.step/r5f5631mddfl-v0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (210 pp, sha256
e7a601a78806d215, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).