Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PT1301D23F

PowTech CR PowTech Shanghai · DC-DC Converters · SOT-23-6

PT1301D23F from PowTech CR PowTech Shanghai, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE input Chip enable input. Drive high (>1.2 V typ) to enable normal switching operation; drive low (<0.4 V) to place the device in zero-current shutdown. Typical CE trigger level is 0.8 V with VDD = 3.3 V.
2 EXT output Gate/base drive output for an external power transistor (NMOS or NPN) used to extend output current beyond the internal switch capability. Maximum drive current is 200 mA; on-resistance is 4.4 Ω (EXT-to-VDD) and 2.45 Ω (EXT-to-GND) typ at VDD = 3.3 V.
3 GND power_in Device ground return. Connect to the system ground plane with a short, wide trace.
4 LX output Switching node driven by the internal NMOS power switch. Connect to the junction of the boost inductor and the rectifier diode. Absolute max VLX = 7 V; on-resistance to GND is 0.3 Ω typ; current limit is 1.5 A typ (peak inductor current rating 2.5 A).
5 VDD power_in IC supply input, sensed at the boosted output rail (bootstrapped operation). Operating range 2 V to 6 V; absolute max 7 V. Bypass to GND with a 1 µF MLCC using short, wide traces.
6 FB input Feedback input to the internal error amplifier. Reference voltage is 1.25 V typ (1.225-1.275 V). Set output voltage with a resistor divider from VOUT to GND using Vout = (1 + R1/R2) × 1.25 V; keep node copper small and away from noise sources.

Key specifications

Parameter Value
Manufacturer PowTech CR PowTech Shanghai
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • PT1301D23F
  • PT1301D23FE89E
  • PT1301D23FEMSH

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD -0.3 7 V 4
LX pin Switch Voltage VLX -0.3 7 V 4
Voltage on other I/O pins VIO -0.3 V 4
LX pin Output Current IOUT 2.5 A 4
EXT pin Drive Current IEXT 200 mA 4
Operating Temperature Range TOPT -40 125 ℃ 4
Storage Temperature Range TSTG -65 150 ℃ 4
Lead Temperature (Soldering) TSOLDER 260 ℃ 10s 4
Startup Voltage VST 0.8 1.05 V IL = 1mA 4
Operating VDD Range VDD 2 6 V VDD pin Voltage 4
Shutdown Current IOFF 0.01 1 μA CE Pin = 0V, VIN = 4.5V 4
Switch-Off Current ISWITCH OFF 14 25 μA VIN = 6V 4
Continuous Switching Current ISWITCH 0.22 0.24 0.7 mA VIN = CE= 3.3V, VFB = GND 4
Feedback Reference Voltage VREF 1.225 1.25 1.275 V Close loop, VDD = 3.3V 4
Switching Frequency Fs 400 500 600 KHz VDD = 3.3V 4
Maximum Duty DMAX 85 94 % VDD = 3.3V 4
On Resistance, LX to GND RONLX 0.3 1.1 Ω VDD = 3.3V 4
Current Limit ILIMIT 1 1.5 2 A VDD = 3.3V 4
On Resistance, EXT to VDD RONEXTP 4.4 8.5 Ω VDD = 3.3V 4
On Resistance, EXT to GND RONEXTN 2.45 8.5 Ω VDD = 3.3V 4
Line Regulation △VLINE 1.25 5 mV/V VIN = 3.5 ~ 6V, IL = 1mA 4
CE trigger Level VCE 0.4 0.8 1.2 V VDD = 3.3V 5
No Load Current INO LOAD 56 μA VIN = 1.5V, VOUT = 3.3V 4
Load Regulation △VLOAD 0.14 mV/mA VIN = 2.5V, IL = 1 ~ 100mA 4
Vout Temperature Coefficient TS 50 ppm/℃ 5
Thermal Shutdown Hysteresis △TSD 10 ℃ 5
Package Thermal Resistance, junction-to-case PTR1 145 W/℃ SOT-23-6, ΘJC 4

CAD (KiCad official)

  • Symbol: PT1301D23F
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: pt1301d23f-etched.step / pt1301d23f-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pt1301d23f.step / pt1301d23f.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: PowTech CR PowTech Shanghai datasheet (10 pp, sha256 20ff3ed7476142e1, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF