Generated by kicad-footprint-generator · KiCad file format 20260206
PT1301D23F
PowTech CR PowTech Shanghai · DC-DC Converters · SOT-23-6
PT1301D23F from PowTech CR PowTech Shanghai, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE | input | Chip enable input. Drive high (>1.2 V typ) to enable normal switching operation; drive low (<0.4 V) to place the device in zero-current shutdown. Typical CE trigger level is 0.8 V with VDD = 3.3 V. |
| 2 | EXT | output | Gate/base drive output for an external power transistor (NMOS or NPN) used to extend output current beyond the internal switch capability. Maximum drive current is 200 mA; on-resistance is 4.4 Ω (EXT-to-VDD) and 2.45 Ω (EXT-to-GND) typ at VDD = 3.3 V. |
| 3 | GND | power_in | Device ground return. Connect to the system ground plane with a short, wide trace. |
| 4 | LX | output | Switching node driven by the internal NMOS power switch. Connect to the junction of the boost inductor and the rectifier diode. Absolute max VLX = 7 V; on-resistance to GND is 0.3 Ω typ; current limit is 1.5 A typ (peak inductor current rating 2.5 A). |
| 5 | VDD | power_in | IC supply input, sensed at the boosted output rail (bootstrapped operation). Operating range 2 V to 6 V; absolute max 7 V. Bypass to GND with a 1 µF MLCC using short, wide traces. |
| 6 | FB | input | Feedback input to the internal error amplifier. Reference voltage is 1.25 V typ (1.225-1.275 V). Set output voltage with a resistor divider from VOUT to GND using Vout = (1 + R1/R2) × 1.25 V; keep node copper small and away from noise sources. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | PowTech CR PowTech Shanghai |
| Package | SOT-23-6 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
Same part, different packaging or reel option.
PT1301D23FPT1301D23FE89EPT1301D23FEMSH
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | -0.3 | 7 | V | 4 | ||
| LX pin Switch Voltage | VLX | -0.3 | 7 | V | 4 | ||
| Voltage on other I/O pins | VIO | -0.3 | V | 4 | |||
| LX pin Output Current | IOUT | 2.5 | A | 4 | |||
| EXT pin Drive Current | IEXT | 200 | mA | 4 | |||
| Operating Temperature Range | TOPT | -40 | 125 | ℃ | 4 | ||
| Storage Temperature Range | TSTG | -65 | 150 | ℃ | 4 | ||
| Lead Temperature (Soldering) | TSOLDER | 260 | ℃ | 10s | 4 | ||
| Startup Voltage | VST | 0.8 | 1.05 | V | IL = 1mA | 4 | |
| Operating VDD Range | VDD | 2 | 6 | V | VDD pin Voltage | 4 | |
| Shutdown Current | IOFF | 0.01 | 1 | μA | CE Pin = 0V, VIN = 4.5V | 4 | |
| Switch-Off Current | ISWITCH OFF | 14 | 25 | μA | VIN = 6V | 4 | |
| Continuous Switching Current | ISWITCH | 0.22 | 0.24 | 0.7 | mA | VIN = CE= 3.3V, VFB = GND | 4 |
| Feedback Reference Voltage | VREF | 1.225 | 1.25 | 1.275 | V | Close loop, VDD = 3.3V | 4 |
| Switching Frequency | Fs | 400 | 500 | 600 | KHz | VDD = 3.3V | 4 |
| Maximum Duty | DMAX | 85 | 94 | % | VDD = 3.3V | 4 | |
| On Resistance, LX to GND | RONLX | 0.3 | 1.1 | Ω | VDD = 3.3V | 4 | |
| Current Limit | ILIMIT | 1 | 1.5 | 2 | A | VDD = 3.3V | 4 |
| On Resistance, EXT to VDD | RONEXTP | 4.4 | 8.5 | Ω | VDD = 3.3V | 4 | |
| On Resistance, EXT to GND | RONEXTN | 2.45 | 8.5 | Ω | VDD = 3.3V | 4 | |
| Line Regulation | △VLINE | 1.25 | 5 | mV/V | VIN = 3.5 ~ 6V, IL = 1mA | 4 | |
| CE trigger Level | VCE | 0.4 | 0.8 | 1.2 | V | VDD = 3.3V | 5 |
| No Load Current | INO LOAD | 56 | μA | VIN = 1.5V, VOUT = 3.3V | 4 | ||
| Load Regulation | △VLOAD | 0.14 | mV/mA | VIN = 2.5V, IL = 1 ~ 100mA | 4 | ||
| Vout Temperature Coefficient | TS | 50 | ppm/℃ | 5 | |||
| Thermal Shutdown Hysteresis | △TSD | 10 | ℃ | 5 | |||
| Package Thermal Resistance, junction-to-case | PTR1 | 145 | W/℃ | SOT-23-6, ΘJC | 4 |
CAD (KiCad official)
- Symbol:
PT1301D23F - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
pt1301d23f-etched.step/pt1301d23f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pt1301d23f.step/pt1301d23f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: PowTech CR PowTech Shanghai datasheet (10 pp, sha256
20ff3ed7476142e1, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).