component
TPS62150AQRGTRQ1
Public Made by Adomby adom
Texas Instruments DC-DC Converters, VQFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownTPS62150AQRGTRQ1
Texas Instruments · DC-DC Converters · VQFN-16-EP(3x3)
TPS62150AQRGTRQ1 from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor. |
| 2 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor. |
| 3 | SW | output | Switch node connected to internal MOSFET switches; connect inductor between SW and output capacitor. |
| 4 | PG | tri_state | Output power good indicator with open-drain output (High = VOUT ready, Low = VOUT below nominal regulation; requires pull-up resistor). |
| 5 | FB | input | Voltage feedback input for adjustable version; connect resistive voltage divider to this pin for output voltage setting. |
| 6 | AGND | power_in | Analog ground; must be connected directly to exposed thermal pad and common ground plane. |
| 7 | FSW | input | Switching frequency select input with internal pull-down (Low = 2.5MHz, High = 1.25MHz for typical operation). |
| 8 | DEF | input | Output voltage scaling control input with internal pull-down (Low = nominal, High = nominal + 5%). |
| 9 | SS/TR | input | Soft-start and tracking input; external capacitor sets internal voltage reference rise time for tracking and sequencing. |
| 10 | AVIN | power_in | Analog supply voltage for control circuitry (3V to 17V); must connect to same source as PVIN. |
| 11 | PVIN | power_in | Supply voltage for power stage (3V to 17V); must connect to same source as AVIN. |
| 12 | PVIN | power_in | Supply voltage for power stage (3V to 17V); must connect to same source as AVIN. |
| 13 | EN | input | Enable control input with internal pull-down (High = enabled, Low = disabled). |
| 14 | VOS | input | Output voltage sense pin for control loop feedback connection. |
| 15 | PGND | power_in | Power ground; must be connected directly to exposed thermal pad and common ground plane. |
| 16 | PGND | power_in | Power ground; must be connected directly to exposed thermal pad and common ground plane. |
| 17 | Exposed Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
CAD (KiCad official)
- Symbol:
TPS62150AQRGTRQ1 - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps62150aqrgtrq1-etched.step/tps62150aqrgtrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps62150aqrgtrq1.step/tps62150aqrgtrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
e6f7e40302057bc1, retrieved 2026-10-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).