3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownIS25WP080D-JNLE
ISSI(Integrated Silicon Solution) · NOR FLASH · SOIC-8
IS25WP080D-JNLE from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CE# | input | Chip Enable input: driving it high deselects the device and puts the outputs in high impedance, and after power-up it must transition from high to low before any instruction is accepted. |
| 2 | SO (IO1) | bidirectional | Serial Data Output in standard SPI, read on the falling edge of SCK, and bidirectional IO1 in Dual and Quad SPI and QPI modes. |
| 3 | WP# (IO2) | bidirectional | Write Protect input that, together with the SRWD bit set to 1 and WP# low, write-protects the Status Register, and becomes IO2 when the QE bit is set to 1. |
| 4 | GND | power_in | Ground: connect to ground when referenced to Vcc. |
| 5 | SI (IO0) | bidirectional | Serial Data Input in standard SPI, sampled on the rising edge of SCK, and bidirectional IO0 in Dual and Quad SPI and QPI modes. |
| 6 | SCK | input | Serial Data Clock providing the synchronized clock for input and output timing operations. |
| 7 | HOLD# or RESET# (IO3) | bidirectional | HOLD# pauses serial communication while low with CE# low (SO high impedance), RESET# driven low puts the memory in reset with output High-Z, and the pin becomes IO3 when QE is set to 1; the function is chosen by the P7 bit in the Read Register. |
| 8 | Vcc | power_in | Device core power supply; the IS25WP part is specified for 1.65V to 1.95V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ISSI(Integrated Silicon Solution) |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | °C | 96 | |||
| Input Voltage with Respect to Ground on All Pins | -0.5 | V | max VCC + 0.5V as printed | 96 | |||
| All Output Voltage with Respect to Ground | -0.5 | V | max VCC + 0.5V as printed | 96 | |||
| VCC Supply Voltage (IS25WP) | VCC | -0.5 | 2.5 | V | IS25WP | 96 | |
| Electrostatic Discharge Voltage (Human Body Model) | -2000 | 2000 | V | ANSI/ESDA/JEDEC JS-001 | 96 | ||
| Operating Temperature, Extended Grade E | -40 | 105 | °C | Extended Grade E | 96 | ||
| VCC Power Supply (IS25WP) | VCC | 1.65 | 1.8 | 1.95 | V | IS25WP | 96 |
| VCC Active Read current, NORD | ICC1 | 4 | 12 | mA | NORD at 50MHz | 97 | |
| VCC Active Read current, FRD Single | ICC1 | 6 | 14 | mA | FRD Single at 133MHz | 97 | |
| VCC Active Read current, FRD Dual | ICC1 | 8 | 15 | mA | FRD Dual at 133MHz | 97 | |
| VCC Active Read current, FRD Quad | ICC1 | 10 | 17 | mA | FRD Quad at 133MHz | 97 | |
| VCC Active Read current, FRD Quad 84MHz | ICC1 | 8 | 15 | mA | FRD Quad at 84MHz | 97 | |
| VCC Active Read current, FRD Quad 104MHz | ICC1 | 9 | 16 | mA | FRD Quad at 104MHz | 97 | |
| VCC Active Read current, FRD Single DTR | ICC1 | 6 | 14 | mA | FRD Single DTR at 66MHz | 97 | |
| VCC Active Read current, FRD Dual DTR | ICC1 | 8 | 15 | mA | FRD Dual DTR at 66MHz | 97 | |
| VCC Active Read current, FRD Quad DTR | ICC1 | 10 | 17 | mA | FRD Quad DTR at 66MHz | 97 | |
| VCC Program Current, 85°C | ICC2 | 22 | 25 | mA | CE# = VCC; 85°C | 97 | |
| VCC Program Current, 105°C | ICC2 | 25 | mA | CE# = VCC; 105°C | 97 | ||
| VCC Program Current, 125°C | ICC2 | 25 | mA | CE# = VCC; 125°C | 97 | ||
| VCC WRSR Current, 85°C | ICC3 | 22 | 25 | mA | CE# = VCC; 85°C | 97 | |
| VCC WRSR Current, 105°C | ICC3 | 25 | mA | CE# = VCC; 105°C | 97 | ||
| VCC WRSR Current, 125°C | ICC3 | 25 | mA | CE# = VCC; 125°C | 97 | ||
| VCC Erase Current (SER/BER32/BER64), 85°C | ICC4 | 22 | 25 | mA | CE# = VCC; 85°C | 97 | |
| VCC Erase Current (SER/BER32/BER64), 105°C | ICC4 | 25 | mA | CE# = VCC; 105°C | 97 | ||
| VCC Erase Current (SER/BER32/BER64), 125°C | ICC4 | 25 | mA | CE# = VCC; 125°C | 97 | ||
| VCC Erase Current (CE), 85°C | ICC5 | 22 | 25 | mA | CE# = VCC; 85°C | 97 | |
| VCC Erase Current (CE), 105°C | ICC5 | 25 | mA | CE# = VCC; 105°C | 97 | ||
| VCC Erase Current (CE), 125°C | ICC5 | 25 | mA | CE# = VCC; 125°C | 97 | ||
| VCC Standby Current CMOS, 85°C | ISB1 | 8 | 15 | µA | CE# = VCC, VIN = GND or VCC; 85°C | 97 | |
| VCC Standby Current CMOS, 105°C | ISB1 | 20 | µA | CE# = VCC, VIN = GND or VCC; 105°C | 97 | ||
| VCC Standby Current CMOS, 125°C | ISB1 | 30 | µA | CE# = VCC, VIN = GND or VCC; 125°C | 97 | ||
| Deep Power Down Current (IS25WP), 85°C | ISB2 | 1 | 5 | µA | IS25WP; CE# = VCC, VIN = GND or VCC; 85°C | 97 | |
| Deep Power Down Current (IS25WP), 105°C | ISB2 | 10 | µA | IS25WP; CE# = VCC, VIN = GND or VCC; 105°C | 97 | ||
| Deep Power Down Current (IS25WP), 125°C | ISB2 | 15 | µA | IS25WP; CE# = VCC, VIN = GND or VCC; 125°C | 97 | ||
| Input Leakage Current | ILI | -1 | 1 | µA | VIN = 0V to VCC | 97 | |
| Output Leakage Current | ILO | -1 | 1 | µA | VIN = 0V to VCC | 97 | |
| Input Low Voltage | VIL | -0.5 | V | 97 | |||
| Output Low Voltage | VOL | 0.2 | V | IOL = 100 µA | 97 | ||
| Input Capacitance (CE#, SCK) | CIN | 6 | pF | VIN = 0V; TA = 25°C, VCC = 1.8V (IS25WPx), 1MHz | 98 | ||
| Input/Output Capacitance (other pins) | CIN/OUT | 8 | pF | VIN/OUT = 0V; TA = 25°C, VCC = 1.8V (IS25WPx), 1MHz | 98 | ||
| Clock Frequency for fast read (SPI, Dual, Dual I/O, Quad I/O, QPI) | fCT | 0 | 133 | MHz | SPI, Dual, Dual I/O, Quad I/O, and QPI | 99 | |
| Clock Frequency for fast read DTR (SPI DTR, Dual DTR, Dual I/O DTR, Quad I/O DTR, QPI DTR) | fCT | 0 | 66 | MHz | SPI DTR, Dual DTR, Dual I/O DTR, Quad I/O DTR, and QPI DTR | 99 | |
| Clock Frequency for read (03h) | fC | 0 | 50 | MHz | Read (03h) | 99 | |
| CE# High Time | tCEH | 7 | ns | 99 | |||
| CE# Setup Time | tCS | 5 | ns | 99 | |||
| CE# Hold Time | tCH | 5 | ns | 99 | |||
| Data In Setup Time (STR) | tDS | 2 | ns | STR | 99 | ||
| Data In Hold Time (STR) | tDH | 2 | ns | STR | 99 | ||
| Output Valid @133MHz | tV | 7 | ns | @133MHz (CL = 15pF) | 99 | ||
| Output Valid @104MHz | tV | 8 | ns | @104MHz (CL = 30pF) | 99 | ||
| Output Hold Time | tOH | 2 | ns | 99 | |||
| Output Disable Time | tDIS | 8 | ns | 99 | |||
| Write Protect Setup Time | tWHSL | 20 | ns | 99 | |||
| Write Protect Hold Time | tSHWL | 100 | ns | 99 | |||
| Sector Erase Time (4Kbyte) | tEC | 70 | 300 | ms | 99 | ||
| Block Erase Time (32Kbyte) | tEC | 0.1 | 0.5 | s | 99 | ||
| Block Erase Time (64Kbyte) | tEC | 0.15 | 1 | s | 99 | ||
| Chip Erase Time (8Mb) | tEC | 2 | 6 | s | 8Mb | 99 | |
| Page Program Time | tPP | 0.2 | 0.8 | ms | 99 | ||
| Vcc(min) to CE# Low | tVCE | 300 | us | Vcc(min) to CE# Low | 103 |
CAD (KiCad official)
- Symbol:
IS25WP080D-JNLE - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
is25wp080d-jnle-etched.step/is25wp080d-jnle-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is25wp080d-jnle.step/is25wp080d-jnle.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ISSI(Integrated Silicon Solution) datasheet (112 pp, sha256
94e49525c936355b, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).