main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers is25wp080d-jnle: symbol repaired (body fitted to the names) · Ray
is25wp080d-jnle-etched.glb Publish 0.1.0 · Ray
is25wp080d-jnle-etched.step is25wp080d-jnle: factory component page (tier=lcsc) · Ray
is25wp080d-jnle-hero.glb is25wp080d-jnle: hero GLB from the etched model (keeps the MPN mark) · Ray
is25wp080d-jnle-hero.overlay.json Publish 0.1.0 · Ray
is25wp080d-jnle.glb Publish 0.1.0 · Ray
is25wp080d-jnle.kicad_mod Publish 0.1.0 · Ray
is25wp080d-jnle.kicad_sym is25wp080d-jnle: symbol repaired (body fitted to the names) · Ray
is25wp080d-jnle.lbr is25wp080d-jnle: symbol repaired (body fitted to the names) · Ray
is25wp080d-jnle.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

IS25WP080D-JNLE

ISSI(Integrated Silicon Solution) · NOR FLASH · SOIC-8

IS25WP080D-JNLE from ISSI(Integrated Silicon Solution), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CE# input Chip Enable input: driving it high deselects the device and puts the outputs in high impedance, and after power-up it must transition from high to low before any instruction is accepted.
2 SO (IO1) bidirectional Serial Data Output in standard SPI, read on the falling edge of SCK, and bidirectional IO1 in Dual and Quad SPI and QPI modes.
3 WP# (IO2) bidirectional Write Protect input that, together with the SRWD bit set to 1 and WP# low, write-protects the Status Register, and becomes IO2 when the QE bit is set to 1.
4 GND power_in Ground: connect to ground when referenced to Vcc.
5 SI (IO0) bidirectional Serial Data Input in standard SPI, sampled on the rising edge of SCK, and bidirectional IO0 in Dual and Quad SPI and QPI modes.
6 SCK input Serial Data Clock providing the synchronized clock for input and output timing operations.
7 HOLD# or RESET# (IO3) bidirectional HOLD# pauses serial communication while low with CE# low (SO high impedance), RESET# driven low puts the memory in reset with output High-Z, and the pin becomes IO3 when QE is set to 1; the function is chosen by the P7 bit in the Read Register.
8 Vcc power_in Device core power supply; the IS25WP part is specified for 1.65V to 1.95V.

Key specifications

Parameter Value
Manufacturer ISSI(Integrated Silicon Solution)
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 96
Input Voltage with Respect to Ground on All Pins -0.5 V max VCC + 0.5V as printed 96
All Output Voltage with Respect to Ground -0.5 V max VCC + 0.5V as printed 96
VCC Supply Voltage (IS25WP) VCC -0.5 2.5 V IS25WP 96
Electrostatic Discharge Voltage (Human Body Model) -2000 2000 V ANSI/ESDA/JEDEC JS-001 96
Operating Temperature, Extended Grade E -40 105 °C Extended Grade E 96
VCC Power Supply (IS25WP) VCC 1.65 1.8 1.95 V IS25WP 96
VCC Active Read current, NORD ICC1 4 12 mA NORD at 50MHz 97
VCC Active Read current, FRD Single ICC1 6 14 mA FRD Single at 133MHz 97
VCC Active Read current, FRD Dual ICC1 8 15 mA FRD Dual at 133MHz 97
VCC Active Read current, FRD Quad ICC1 10 17 mA FRD Quad at 133MHz 97
VCC Active Read current, FRD Quad 84MHz ICC1 8 15 mA FRD Quad at 84MHz 97
VCC Active Read current, FRD Quad 104MHz ICC1 9 16 mA FRD Quad at 104MHz 97
VCC Active Read current, FRD Single DTR ICC1 6 14 mA FRD Single DTR at 66MHz 97
VCC Active Read current, FRD Dual DTR ICC1 8 15 mA FRD Dual DTR at 66MHz 97
VCC Active Read current, FRD Quad DTR ICC1 10 17 mA FRD Quad DTR at 66MHz 97
VCC Program Current, 85°C ICC2 22 25 mA CE# = VCC; 85°C 97
VCC Program Current, 105°C ICC2 25 mA CE# = VCC; 105°C 97
VCC Program Current, 125°C ICC2 25 mA CE# = VCC; 125°C 97
VCC WRSR Current, 85°C ICC3 22 25 mA CE# = VCC; 85°C 97
VCC WRSR Current, 105°C ICC3 25 mA CE# = VCC; 105°C 97
VCC WRSR Current, 125°C ICC3 25 mA CE# = VCC; 125°C 97
VCC Erase Current (SER/BER32/BER64), 85°C ICC4 22 25 mA CE# = VCC; 85°C 97
VCC Erase Current (SER/BER32/BER64), 105°C ICC4 25 mA CE# = VCC; 105°C 97
VCC Erase Current (SER/BER32/BER64), 125°C ICC4 25 mA CE# = VCC; 125°C 97
VCC Erase Current (CE), 85°C ICC5 22 25 mA CE# = VCC; 85°C 97
VCC Erase Current (CE), 105°C ICC5 25 mA CE# = VCC; 105°C 97
VCC Erase Current (CE), 125°C ICC5 25 mA CE# = VCC; 125°C 97
VCC Standby Current CMOS, 85°C ISB1 8 15 µA CE# = VCC, VIN = GND or VCC; 85°C 97
VCC Standby Current CMOS, 105°C ISB1 20 µA CE# = VCC, VIN = GND or VCC; 105°C 97
VCC Standby Current CMOS, 125°C ISB1 30 µA CE# = VCC, VIN = GND or VCC; 125°C 97
Deep Power Down Current (IS25WP), 85°C ISB2 1 5 µA IS25WP; CE# = VCC, VIN = GND or VCC; 85°C 97
Deep Power Down Current (IS25WP), 105°C ISB2 10 µA IS25WP; CE# = VCC, VIN = GND or VCC; 105°C 97
Deep Power Down Current (IS25WP), 125°C ISB2 15 µA IS25WP; CE# = VCC, VIN = GND or VCC; 125°C 97
Input Leakage Current ILI -1 1 µA VIN = 0V to VCC 97
Output Leakage Current ILO -1 1 µA VIN = 0V to VCC 97
Input Low Voltage VIL -0.5 V 97
Output Low Voltage VOL 0.2 V IOL = 100 µA 97
Input Capacitance (CE#, SCK) CIN 6 pF VIN = 0V; TA = 25°C, VCC = 1.8V (IS25WPx), 1MHz 98
Input/Output Capacitance (other pins) CIN/OUT 8 pF VIN/OUT = 0V; TA = 25°C, VCC = 1.8V (IS25WPx), 1MHz 98
Clock Frequency for fast read (SPI, Dual, Dual I/O, Quad I/O, QPI) fCT 0 133 MHz SPI, Dual, Dual I/O, Quad I/O, and QPI 99
Clock Frequency for fast read DTR (SPI DTR, Dual DTR, Dual I/O DTR, Quad I/O DTR, QPI DTR) fCT 0 66 MHz SPI DTR, Dual DTR, Dual I/O DTR, Quad I/O DTR, and QPI DTR 99
Clock Frequency for read (03h) fC 0 50 MHz Read (03h) 99
CE# High Time tCEH 7 ns 99
CE# Setup Time tCS 5 ns 99
CE# Hold Time tCH 5 ns 99
Data In Setup Time (STR) tDS 2 ns STR 99
Data In Hold Time (STR) tDH 2 ns STR 99
Output Valid @133MHz tV 7 ns @133MHz (CL = 15pF) 99
Output Valid @104MHz tV 8 ns @104MHz (CL = 30pF) 99
Output Hold Time tOH 2 ns 99
Output Disable Time tDIS 8 ns 99
Write Protect Setup Time tWHSL 20 ns 99
Write Protect Hold Time tSHWL 100 ns 99
Sector Erase Time (4Kbyte) tEC 70 300 ms 99
Block Erase Time (32Kbyte) tEC 0.1 0.5 s 99
Block Erase Time (64Kbyte) tEC 0.15 1 s 99
Chip Erase Time (8Mb) tEC 2 6 s 8Mb 99
Page Program Time tPP 0.2 0.8 ms 99
Vcc(min) to CE# Low tVCE 300 us Vcc(min) to CE# Low 103

CAD (KiCad official)

  • Symbol: IS25WP080D-JNLE
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: is25wp080d-jnle-etched.step / is25wp080d-jnle-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is25wp080d-jnle.step / is25wp080d-jnle.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ISSI(Integrated Silicon Solution) datasheet (112 pp, sha256 94e49525c936355b, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF