Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

NCP1579DR2G

onsemi · DC-DC Controllers · SOIC-8

NCP1579DR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BST power_in Supply rail for the floating top gate driver, fed from the input through an external diode with a bootstrap capacitor CBST of typically 0.1 uF to 1 uF placed near the IC between BST and PHASE.
2 TG output Top gate MOSFET driver pin, connected to the gate of the top N-Channel MOSFET, with TG rated 30 V wrt/GND and 15 V wrt/PHASE.
3 GND power_in IC ground reference to which all control circuits are referenced.
4 BG output Bottom gate MOSFET driver pin, connected to the gate of the bottom N-Channel MOSFET, rated 15 V with respect to GND.
5 VCC power_in Supply rail for the internal circuitry with an operating range of 4.5 V to 13.2 V, decoupled with a 1 uF capacitor to GND placed near the IC.
6 FB input Inverting input to the error amplifier, connected to the output resistor divider or directly to Vout, with the controller regulating this pin to 0.8 V.
7 COMP/DIS passive Error amplifier output and PWM comparator non-inverting input that also acts as the soft-start capacitor node; pulling it low disables the controller, with the 400 mV enable threshold.
8 PHASE passive Switch node pin and reference for the floating top gate driver, connected to the source of the top MOSFET, rated 26 V maximum and -0.7 V minimum.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category Power Management ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range 4.5 13.2 V 4
Boost Voltage Range 4.5 26.5 V 4
Quiescent Supply Current 1 8 mA VFB = 1.0 V, No Switching, VCC = 13.2 V 4
Boost Quiescent Current 0.1 1 mA VFB = 1.0 V, No Switching, VCC = 13.2 V 4
UVLO Threshold 3.8 4.2 V VCC Rising Edge 4
UVLO Hysteresis 300 370 440 mV 4
VFB Feedback Voltage, Control Loop in Regulation VFB 784 800 816 mV TA = 0 to 70C 4
Oscillator Frequency 233 275 317 kHz TA = 0 to 70C 4
Ramp-Amplitude Voltage 0.8 1.1 1.4 V 4
Minimum Duty Cycle 0 % 4
Maximum Duty Cycle 70 75 80 % 4
Transconductance GM 3 4.4 mmho 4
Open Loop DC Gain 55 70 DB 4
Output Source Current 80 120 A VFB < 0.8 V 4
Output Sink Current 80 120 A VFB > 0.8 V 4
Input Bias Current 0.1 1 A 4
SS Source Current 7 14 A VFB < 0.8 V 4
TG Falling to BG Rising Delay 40 90 ns VCC = 12 V, TG < 2.0 V, BG > 2.0 V 4
BG Falling to TG Rising Delay 35 90 ns VCC = 12 V, BG < 2.0 V, TG > 2.0 V 4
Enable Threshold 0.3 0.4 0.5 V 4
Main Supply Voltage Input VCC -0.3 15 V 3
Bootstrap Supply Voltage Input BST -0.3 30 V wrt/GND 3
Bootstrap Supply Voltage Input BST -0.3 15 V wrt/PHASE 3
Bootstrap Supply Voltage Input BST 35 V wrt/GND for < 50 ns 3
Switching Node (Bootstrap Supply Return) PHASE -0.7 26 V 3
Switching Node (Bootstrap Supply Return) PHASE -5 V for < 50 ns 3
High-Side Driver Output (Top Gate) TG 30 V wrt/GND 3
High-Side Driver Output (Top Gate) TG -0.3 15 V wrt/PHASE 3
Low-Side Driver Output (Bottom Gate) BG -0.3 15 V 3
Low-Side Driver Output (Bottom Gate) BG -2 V for < 200 ns 3
Feedback FB -0.3 5.5 V 3
COMP/DISABLE COMP/DIS -0.3 5.5 V 3
Operating Junction Temperature Range TJ 0 125 C 3
Operating Ambient Temperature Range TA 0 70 C 3
Storage Temperature Range Tstg -55 150 C 3
Lead Temperature Soldering 260 C 10 sec, Reflow (SMD styles only), Pb-Free 3
Thermal Resistance, Junction-to-Ambient RJA 165 C/W 3
Thermal Resistance, Junction-to-Case RJC 45 C/W 3

CAD (KiCad official)

  • Symbol: NCP1579DR2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ncp1579dr2g-etched.step / ncp1579dr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ncp1579dr2g.step / ncp1579dr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (14 pp, sha256 c552edf21b4d656a, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF