3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownNCP1579DR2G
onsemi · DC-DC Controllers · SOIC-8
NCP1579DR2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BST | power_in | Supply rail for the floating top gate driver, fed from the input through an external diode with a bootstrap capacitor CBST of typically 0.1 uF to 1 uF placed near the IC between BST and PHASE. |
| 2 | TG | output | Top gate MOSFET driver pin, connected to the gate of the top N-Channel MOSFET, with TG rated 30 V wrt/GND and 15 V wrt/PHASE. |
| 3 | GND | power_in | IC ground reference to which all control circuits are referenced. |
| 4 | BG | output | Bottom gate MOSFET driver pin, connected to the gate of the bottom N-Channel MOSFET, rated 15 V with respect to GND. |
| 5 | VCC | power_in | Supply rail for the internal circuitry with an operating range of 4.5 V to 13.2 V, decoupled with a 1 uF capacitor to GND placed near the IC. |
| 6 | FB | input | Inverting input to the error amplifier, connected to the output resistor divider or directly to Vout, with the controller regulating this pin to 0.8 V. |
| 7 | COMP/DIS | passive | Error amplifier output and PWM comparator non-inverting input that also acts as the soft-start capacitor node; pulling it low disables the controller, with the 400 mV enable threshold. |
| 8 | PHASE | passive | Switch node pin and reference for the floating top gate driver, connected to the source of the top MOSFET, rated 26 V maximum and -0.7 V minimum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOIC-8 |
| Category | Power Management ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | 4.5 | 13.2 | V | 4 | |||
| Boost Voltage Range | 4.5 | 26.5 | V | 4 | |||
| Quiescent Supply Current | 1 | 8 | mA | VFB = 1.0 V, No Switching, VCC = 13.2 V | 4 | ||
| Boost Quiescent Current | 0.1 | 1 | mA | VFB = 1.0 V, No Switching, VCC = 13.2 V | 4 | ||
| UVLO Threshold | 3.8 | 4.2 | V | VCC Rising Edge | 4 | ||
| UVLO Hysteresis | 300 | 370 | 440 | mV | 4 | ||
| VFB Feedback Voltage, Control Loop in Regulation | VFB | 784 | 800 | 816 | mV | TA = 0 to 70C | 4 |
| Oscillator Frequency | 233 | 275 | 317 | kHz | TA = 0 to 70C | 4 | |
| Ramp-Amplitude Voltage | 0.8 | 1.1 | 1.4 | V | 4 | ||
| Minimum Duty Cycle | 0 | % | 4 | ||||
| Maximum Duty Cycle | 70 | 75 | 80 | % | 4 | ||
| Transconductance | GM | 3 | 4.4 | mmho | 4 | ||
| Open Loop DC Gain | 55 | 70 | DB | 4 | |||
| Output Source Current | 80 | 120 | A | VFB < 0.8 V | 4 | ||
| Output Sink Current | 80 | 120 | A | VFB > 0.8 V | 4 | ||
| Input Bias Current | 0.1 | 1 | A | 4 | |||
| SS Source Current | 7 | 14 | A | VFB < 0.8 V | 4 | ||
| TG Falling to BG Rising Delay | 40 | 90 | ns | VCC = 12 V, TG < 2.0 V, BG > 2.0 V | 4 | ||
| BG Falling to TG Rising Delay | 35 | 90 | ns | VCC = 12 V, BG < 2.0 V, TG > 2.0 V | 4 | ||
| Enable Threshold | 0.3 | 0.4 | 0.5 | V | 4 | ||
| Main Supply Voltage Input | VCC | -0.3 | 15 | V | 3 | ||
| Bootstrap Supply Voltage Input | BST | -0.3 | 30 | V | wrt/GND | 3 | |
| Bootstrap Supply Voltage Input | BST | -0.3 | 15 | V | wrt/PHASE | 3 | |
| Bootstrap Supply Voltage Input | BST | 35 | V | wrt/GND for < 50 ns | 3 | ||
| Switching Node (Bootstrap Supply Return) | PHASE | -0.7 | 26 | V | 3 | ||
| Switching Node (Bootstrap Supply Return) | PHASE | -5 | V | for < 50 ns | 3 | ||
| High-Side Driver Output (Top Gate) | TG | 30 | V | wrt/GND | 3 | ||
| High-Side Driver Output (Top Gate) | TG | -0.3 | 15 | V | wrt/PHASE | 3 | |
| Low-Side Driver Output (Bottom Gate) | BG | -0.3 | 15 | V | 3 | ||
| Low-Side Driver Output (Bottom Gate) | BG | -2 | V | for < 200 ns | 3 | ||
| Feedback | FB | -0.3 | 5.5 | V | 3 | ||
| COMP/DISABLE | COMP/DIS | -0.3 | 5.5 | V | 3 | ||
| Operating Junction Temperature Range | TJ | 0 | 125 | C | 3 | ||
| Operating Ambient Temperature Range | TA | 0 | 70 | C | 3 | ||
| Storage Temperature Range | Tstg | -55 | 150 | C | 3 | ||
| Lead Temperature Soldering | 260 | C | 10 sec, Reflow (SMD styles only), Pb-Free | 3 | |||
| Thermal Resistance, Junction-to-Ambient | RJA | 165 | C/W | 3 | |||
| Thermal Resistance, Junction-to-Case | RJC | 45 | C/W | 3 |
CAD (KiCad official)
- Symbol:
NCP1579DR2G - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ncp1579dr2g-etched.step/ncp1579dr2g-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ncp1579dr2g.step/ncp1579dr2g.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (14 pp, sha256
c552edf21b4d656a, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).