Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LMK05318BRGZR

Texas Instruments · Clock Jitter Cleaners & Synchronizers · VQFN-48(7x7)

LMK05318BRGZR from Texas Instruments, in a VQFN-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 STATUS0 bidirectional Status output 0 with programmable status signal, driver type (3.3V LVCMOS or open-drain) and polarity; leave floating if unused.
2 STATUS1/FDEC bidirectional Status output 1 with programmable signal, driver type and polarity; in I2C mode it can serve as the DCO frequency-decrement (FDEC) input; leave floating if unused.
3 CAP_DIG passive External LDO bypass capacitor for the digital core logic; recommended 10µF placed close to the pin.
4 VDD_DIG power_in 3.3V core supply for PLL1, PLL2 and digital blocks; recommended 1µF capacitor placed close to the pin.
5 VDD_IN power_in 3.3V core supply for the PRIREF and SECREF inputs; recommended 10µF capacitor placed close to the pin.
6 PRIREF_P input DPLL primary reference clock input (positive), differential or single-ended with programmable AC/DC-coupled termination; unused pair may float.
7 PRIREF_N input DPLL primary reference clock input (negative); pull to ground for single-ended LVCMOS on the P input; unused pair may float.
8 REFSEL input Manual DPLL reference selection, 3-level 1.8V-compatible input: 0 = PRIREF, 1 = SECREF, float or VIM = automatic selection; float if unused.
9 HW_SW_CTRL input Device start-up mode select, 3-level 1.8V-compatible input sampled only at power-on reset (0 = EEPROM+I2C, float = EEPROM+SPI, 1 = I2C+ROM).
10 SECREF_P input DPLL secondary reference clock input (positive), differential or single-ended with programmable AC/DC-coupled termination; unused pair may float.
11 SECREF_N input DPLL secondary reference clock input (negative); pull to ground for single-ended LVCMOS on the P input; unused pair may float.
12 GPIO0/SYNCN input Multi-function logic pin; output SYNC input (active low), externally pulled up if unused.
13 PDN input Active-low device power-down; low holds a hard reset with all blocks including serial interface powered down, high starts device per HW_SW_CTRL; internal 200kΩ pull-up to VDD_IN.
14 OUT0_P output Clock output 0 positive, programmable AC-LVDS, AC-CML, AC-LVPECL or HCSL driver; terminate or disable by register if unused.
15 OUT0_N output Clock output 0 negative, programmable AC-LVDS, AC-CML, AC-LVPECL or HCSL driver; terminate or disable by register if unused.
16 OUT1_N output Clock output 1 negative, programmable AC-LVDS, AC-CML, AC-LVPECL or HCSL driver; terminate or disable by register if unused.
17 OUT1_P output Clock output 1 positive, programmable AC-LVDS, AC-CML, AC-LVPECL or HCSL driver; terminate or disable by register if unused.
18 VDDO_01 power_in Output supply (1.8V, 2.5V or 3.3V) for OUT0 and OUT1; 0.1µF capacitor close to pin; may float if outputs unused.
19 VDDO_23 power_in Output supply (1.8V, 2.5V or 3.3V) for OUT2 and OUT3; 0.1µF capacitor close to pin; may float if outputs unused.
20 OUT2_P output Clock output 2 positive, programmable AC-LVDS, AC-CML, AC-LVPECL or HCSL driver; terminate or disable by register if unused.
21 OUT2_N output Clock output 2 negative, programmable AC-LVDS, AC-CML, AC-LVPECL or HCSL driver; terminate or disable by register if unused.
22 OUT3_N output Clock output 3 negative, programmable AC-LVDS, AC-CML, AC-LVPECL or HCSL driver; terminate or disable by register if unused.
23 OUT3_P output Clock output 3 positive, programmable AC-LVDS, AC-CML, AC-LVPECL or HCSL driver; terminate or disable by register if unused.
24 GPIO1/SCS input Multi-function logic pin; I2C address LSB select (low = 00b, float = 01b, high = 10b) sampled at POR, or SPI chip select (SCS) in SPI mode.
25 SDA/SDI bidirectional I2C serial data I/O (open-drain, needs external pull-up) or SPI serial data input (SDI).
26 SCL/SCK input I2C serial clock input (open-drain, needs external pull-up) or SPI serial clock input (SCK).
27 VDD_PLL1 power_in 3.3V core supply for PLL1; recommended 10µF capacitor placed close to the pin.
28 CAP_PLL1 passive External LDO bypass capacitor for APLL1; recommended 10µF placed close to the pin.
29 LF1 passive External loop filter capacitor for APLL1 to ground; recommended 0.47µF (APLL LBW = 1.0kHz).
30 GPIO2/SDO/FINC bidirectional Multi-function logic pin; SPI data output (SDO) in SPI mode or DPLL DCO frequency-increment (FINC) input, active high, in I2C mode.
31 XO_P input XO/TCXO/OCXO input (positive), differential or single-ended (LVCMOS up to 2.5V) with programmable termination; input range 10 to 100MHz.
32 XO_N input XO/TCXO/OCXO input (negative); pull to ground for single-ended LVCMOS on the P input.
33 VDD_XO power_in 3.3V core supply for the XO input; recommended 10µF capacitor placed close to the pin.
34 LF2 passive External loop filter capacitor for APLL2 to ground; recommended 0.1µF (APLL LBW = 500kHz).
35 CAP_PLL2 passive External LDO bypass capacitor for APLL2; recommended 10µF placed close to the pin.
36 VDD_PLL2 power_in 3.3V core supply for PLL2; recommended 10µF capacitor placed close to the pin.
37 VDDO_4 power_in Output supply (1.8V, 2.5V or 3.3V) for OUT4; 0.1µF capacitor close to pin; may float if output unused.
38 OUT4_N output Clock output 4 negative, programmable AC-LVDS, AC-CML, AC-LVPECL, HCSL or 1.8V LVCMOS driver; terminate or disable by register if unused.
39 OUT4_P output Clock output 4 positive, programmable AC-LVDS, AC-CML, AC-LVPECL, HCSL or 1.8V LVCMOS driver; terminate or disable by register if unused.
40 VDDO_5 power_in Output supply (1.8V, 2.5V or 3.3V) for OUT5; 0.1µF capacitor close to pin; may float if output unused.
41 OUT5_N output Clock output 5 negative, programmable AC-LVDS, AC-CML, AC-LVPECL, HCSL or 1.8V LVCMOS driver; terminate or disable by register if unused.
42 OUT5_P output Clock output 5 positive, programmable AC-LVDS, AC-CML, AC-LVPECL, HCSL or 1.8V LVCMOS driver; terminate or disable by register if unused.
43 VDDO_6 power_in Output supply (1.8V, 2.5V or 3.3V) for OUT6; 0.1µF capacitor close to pin; may float if output unused.
44 OUT6_N output Clock output 6 negative, programmable AC-LVDS, AC-CML, AC-LVPECL, HCSL or 1.8V LVCMOS driver; terminate or disable by register if unused.
45 OUT6_P output Clock output 6 positive, programmable AC-LVDS, AC-CML, AC-LVPECL, HCSL or 1.8V LVCMOS driver; terminate or disable by register if unused.
46 VDDO_7 power_in Output supply (1.8V, 2.5V or 3.3V) for OUT7; 0.1µF capacitor close to pin; may float if output unused.
47 OUT7_N output Clock output 7 negative, programmable AC-LVDS, AC-CML, AC-LVPECL, HCSL or 1.8V LVCMOS driver (supports 1PPS output); terminate or disable by register if unused.
48 OUT7_P output Clock output 7 positive, programmable AC-LVDS, AC-CML, AC-LVPECL, HCSL or 1.8V LVCMOS driver (supports 1PPS output); terminate or disable by register if unused.
49 GND power_in Ground/thermal exposed pad; connect to PCB ground with at least a 5x5 via array for electrical and thermal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-48(7x7)
Category RTC/Clock Chip
Pins 49

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Core supply voltage VDD 3.135 3.3 3.465 V 8
Output supply voltage (AC-LVDS/AC-CML/AC-LVPECL/HCSL) 1.8V VDDO_x 1.71 1.8 1.89 V AC-LVDS, AC-CML, AC-LVPECL or HCSL driver 8
Output supply voltage 2.5V VDDO_x 2.375 2.5 2.625 V AC-LVDS, AC-CML, AC-LVPECL or HCSL driver 8
Output supply voltage 3.3V VDDO_x 3.135 3.3 3.465 V AC-LVDS, AC-CML, AC-LVPECL or HCSL driver 8
Output supply voltage 1.8V LVCMOS VDDO_x 1.71 1.8 1.89 V 1.8V LVCMOS driver 8
Input voltage range clock and logic inputs VIN 0 3.465 V 8
Ambient operating temperature TA -40 85 °C 8
Junction temperature TJ 125 °C 8
Power supply ramp time tVDD 0.01 100 ms 8
EEPROM programming cycles nEEcyc 100 cycles 8
Core supply voltage VDD -0.3 3.6 V 8
Output supply voltage VDDO -0.3 3.6 V 8
Junction temperature TJ 150 °C 8
Storage temperature range Tstg -65 150 °C 8
ESD HBM V(ESD) -2000 2000 V ANSI/ESDA/JEDEC JS-001, all pins 8
ESD CDM V(ESD) -750 750 V ANSI/ESDA/JEDEC JS-002, all pins 8
Total current consumption, power down IDDPDN 56 75 mA Device powered down (PDN pin held low) 10
XO input frequency range fIN 10 100 MHz 10
XO single-ended input voltage swing VIN-SE 0.4 2.6 Vpp Single-ended input, internally AC coupled 10
XO differential input peak-to-peak swing VIN-DIFF 0.4 2 Vpp Differential input 10
XO differential input voltage swing VID 0.2 1 /V/ Differential input 10
XO input duty cycle IDC 40 60 % 10
XO input leakage IIN -350 350 µA 50Ω and 100Ω internal termination disabled 10
Reference input frequency, differential fIN 5 800 MHz Differential input 10
Reference single-ended input swing VIN-SE 0.4 2.6 Vpp AC-coupled input 10
Reference differential swing Vpp VIN-DIFF 0.4 2 Vpp Differential input, VHYST = 50mV 10
Reference differential swing Vpp VIN-DIFF 0.7 2 Vpp Differential input, VHYST = 200mV 10
Reference differential voltage swing VID 0.2 1 V Differential input, VHYST = 50mV 10
Reference differential voltage swing VID 0.35 1 V Differential input, VHYST = 200mV 10
Reference input leakage IIN -350 350 µA 50Ω and 100Ω internal termination disabled 10
VCO1 frequency range fVCO1 2499.75 2500 2500.25 MHz 10
VCO2 frequency range fVCO2 5500 6250 MHz 10
Allowable temperature drift for continuous lock /ΔTCL/ 125 °C After programming lock, output configuration must not be changed to provide continuous lock 10
Reference input high voltage VIH 1.8 V DC-coupled input 10
Reference input low voltage VIL 0.6 V DC-coupled input 10
Core current VDD_DIG IDD_DIG 21 mA 9
Core current VDD_IN IDD_IN 43 mA 9
Core current VDD_PLL1 IDD_PLL1 110 mA DPLL and APLL1 enabled 9
Core current VDD_XO IDD_XO 20 mA 9
Core current VDD_PLL2, APLL2 disabled IDD_PLL2 18.5 mA APLL2 disabled 9
Core current VDD_PLL2, APLL2 enabled IDD_PLL2 120 mA APLL2 enabled 9
Output current, mux+divider, divider 2 to 6 IDDO_x 65 mA Output mux and divider enabled, excluding driver, divider value = 2 to 6 10
Output current, mux+divider, divider >6 IDDO_x 70 mA Output mux and divider enabled, excluding driver, divider value > 6 10
Output driver current AC-LVDS IDDO_x 11 mA AC-LVDS 10
Output driver current AC-CML IDDO_x 16 mA AC-CML 10
Output driver current AC-LVPECL IDDO_x 18 mA AC-LVPECL 10
Output driver current HCSL IDDO_x 25 mA HCSL, 50Ω load to GND 10
Output driver current 1.8V LVCMOS IDDO_x 4.7 mA 1.8V LVCMOS (x2), 100MHz 10
Junction-to-ambient thermal resistance (4-layer JEDEC) RθJA 23.3 °C/W RGZ (VQFN) 48 pin 9
Junction-to-case (top) thermal resistance RθJC(top) 13.2 °C/W 4-layer JEDEC 9
Junction-to-board thermal resistance RθJB 7.4 °C/W 4-layer JEDEC 9
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.4 °C/W 4-layer JEDEC 9
Junction-to-top characterization parameter ψJT 0.2 °C/W 4-layer JEDEC 9
Junction-to-board characterization parameter ψJB 7.3 °C/W 4-layer JEDEC 9
Junction-to-ambient thermal resistance (10-layer custom PCB) RθJA 9.1 °C/W 10-layer custom PCB 9
Junction-to-board thermal resistance (10-layer) RθJB 4.4 °C/W 10-layer custom PCB 9
Junction-to-board characterization parameter (10-layer) ψJB 4.4 °C/W 10-layer custom PCB 9

CAD (KiCad official)

  • Symbol: LMK05318BRGZR
  • Footprint: Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm
  • 3D model: VQFN-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: lmk05318brgzr-etched.step / lmk05318brgzr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lmk05318brgzr.step / lmk05318brgzr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (99 pp, sha256 131cbf173c63a64c, retrieved 2026-10-30, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF