Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IS31FL3732A-QFLS2-TR

Lumissil Microsystems · LED Drivers · QFN-40-EP(5x5)

IS31FL3732A-QFLS2-TR from Lumissil Microsystems, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PVCC power_in Power supply for internal power block.
2 NC unconnected Not connected.
3 NC unconnected Not connected.
4 VCC power_in Digital power supply (device operates from 2.7V to 5.5V).
5 INTB output Interrupt output, active low when movie ends in Auto Frame Play Mode.
6 IN input Audio input.
7 GND power_in Digital ground.
8 GND power_in Digital ground.
9 GND power_in Digital ground.
10 NC unconnected Not connected.
11 CB1 bidirectional LED Matrix B current output/input port.
12 CB2 bidirectional LED Matrix B current output/input port.
13 CB3 bidirectional LED Matrix B current output/input port.
14 CB4 bidirectional LED Matrix B current output/input port.
15 CB5 bidirectional LED Matrix B current output/input port.
16 CB6 bidirectional LED Matrix B current output/input port.
17 CB7 bidirectional LED Matrix B current output/input port.
18 CB8 bidirectional LED Matrix B current output/input port.
19 CB9 bidirectional LED Matrix B current output/input port.
20 PVCC power_in Power supply for internal power block.
21 SDA bidirectional I2C compatible serial data.
22 SCL input I2C compatible serial clock.
23 ADDR2 input I2C address 2 setting.
24 ADDR1 input I2C address 1 setting.
25 SDB input Shuts down the chip when pulled low.
26 AVCC power_in Analog power supply.
27 VIO power_in Input logic reference voltage, 1.8V ≤ VIO ≤ VCC.
28 R_EXT passive Input terminal for an external resistor that regulates the global output current.
29 C_FILT passive Filter capacitor for audio control.
30 SYNC bidirectional Synchronize signal for multi-part synchronization (master output / slave input); float if unused.
31 GND power_in Digital ground.
32 CA1 bidirectional LED Matrix A current output/input port.
33 CA2 bidirectional LED Matrix A current output/input port.
34 CA3 bidirectional LED Matrix A current output/input port.
35 CA4 bidirectional LED Matrix A current output/input port.
36 CA5 bidirectional LED Matrix A current output/input port.
37 CA6 bidirectional LED Matrix A current output/input port.
38 CA7 bidirectional LED Matrix A current output/input port.
39 CA8 bidirectional LED Matrix A current output/input port.
40 CA9 bidirectional LED Matrix A current output/input port.
41 GND power_in Thermal pad; connect to GND.

Key specifications

Parameter Value
Manufacturer Lumissil Microsystems
Package QFN-40-EP(5x5)
Category Display Modules / LED Drivers / Display Drivers
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 2.7 5.5 V 7
Shutdown current ISD 0.1 1 μA VSDB = 0V 7
Logic 0 input voltage VIL 0 0.2 V VIO=3.6V; max printed as 0.2VIO, min as GND 7
Logic 1 input voltage VIH 0.75 1 V VIO=3.6V; min printed as 0.75VIO, max as VIO (multipliers of VIO) 7
Logic 0 output voltage for SYNC VOL 0.4 V IOL = 8mA 7
Logic 1 output voltage for SYNC VOH 0.75 V IOH = 8mA; printed as 0.75VIO (multiplier of VIO) 7
Logic 0 input current IIL 5 nA VINPUT = 0V (Note 4) 7
Logic 1 input current IIH 5 nA VINPUT = VIO (Note 4) 7
Output DC current of CA1CA9, CB1CB9 IOUT 34 mA Matrix display mode without audio modulation (Note 1) 7
Serial-clock frequency (Fast Mode Plus) fSCL 1000 kHz Fast Mode Plus 8
Supply voltage absolute maximum VCC -0.3 6 V 7
Voltage at any input pin -0.3 V max printed as VCC+0.3V 7
Maximum junction temperature TJMAX 150 °C 7
Storage temperature range TSTG -65 150 °C 7
Operating temperature range TA=TJ -40 85 °C 7
Thermal resistance, junction to ambient θJA 24.96 °C/W 7
ESD (HBM) -8 8 kV HBM 7
ESD (CDM) -1 1 kV CDM 7
Quiescent power supply current ICC 2.17 mA Picture Mode, all LEDs off 7
Shutdown current, Software Shutdown 1 ISD 370 μA VSDB = VCC, Software Shutdown 1, Function Register 0Ah written "0000 0000" 7
Shutdown current, Software Shutdown 2 ISD 3 μA VSDB = VCC, Software Shutdown 2, Function Register 0Ah written "0000 0010" 7
Current sink headroom voltage VHR 350 mV C1~C9 ISINK = 270mA (Note 1, 2) 7
Current source headroom voltage VHR 350 mV C1~C9 ISOURCE = 34mA (Note 1) 7
Period of scanning tSCAN 43 µs Figure 4 7
Non-overlap blanking time during scan tSCANOL 6 µs Figure 4 7
Average current of each LED ILED 3.2 mA REXT = 20kΩ, PWM Register written "1111 1111" (Note 3) 7

CAD (KiCad official)

  • Symbol: IS31FL3732A-QFLS2-TR
  • Footprint: Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
  • 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: is31fl3732a-qfls2-tr-etched.step / is31fl3732a-qfls2-tr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); is31fl3732a-qfls2-tr.step / is31fl3732a-qfls2-tr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Lumissil Microsystems datasheet (27 pp, sha256 28bf1782e129e410, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF