Generated by kicad-footprint-generator · KiCad file format 20260206
IS31FL3732A-QFLS2-TR
Lumissil Microsystems · LED Drivers · QFN-40-EP(5x5)
IS31FL3732A-QFLS2-TR from Lumissil Microsystems, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PVCC | power_in | Power supply for internal power block. |
| 2 | NC | unconnected | Not connected. |
| 3 | NC | unconnected | Not connected. |
| 4 | VCC | power_in | Digital power supply (device operates from 2.7V to 5.5V). |
| 5 | INTB | output | Interrupt output, active low when movie ends in Auto Frame Play Mode. |
| 6 | IN | input | Audio input. |
| 7 | GND | power_in | Digital ground. |
| 8 | GND | power_in | Digital ground. |
| 9 | GND | power_in | Digital ground. |
| 10 | NC | unconnected | Not connected. |
| 11 | CB1 | bidirectional | LED Matrix B current output/input port. |
| 12 | CB2 | bidirectional | LED Matrix B current output/input port. |
| 13 | CB3 | bidirectional | LED Matrix B current output/input port. |
| 14 | CB4 | bidirectional | LED Matrix B current output/input port. |
| 15 | CB5 | bidirectional | LED Matrix B current output/input port. |
| 16 | CB6 | bidirectional | LED Matrix B current output/input port. |
| 17 | CB7 | bidirectional | LED Matrix B current output/input port. |
| 18 | CB8 | bidirectional | LED Matrix B current output/input port. |
| 19 | CB9 | bidirectional | LED Matrix B current output/input port. |
| 20 | PVCC | power_in | Power supply for internal power block. |
| 21 | SDA | bidirectional | I2C compatible serial data. |
| 22 | SCL | input | I2C compatible serial clock. |
| 23 | ADDR2 | input | I2C address 2 setting. |
| 24 | ADDR1 | input | I2C address 1 setting. |
| 25 | SDB | input | Shuts down the chip when pulled low. |
| 26 | AVCC | power_in | Analog power supply. |
| 27 | VIO | power_in | Input logic reference voltage, 1.8V ≤ VIO ≤ VCC. |
| 28 | R_EXT | passive | Input terminal for an external resistor that regulates the global output current. |
| 29 | C_FILT | passive | Filter capacitor for audio control. |
| 30 | SYNC | bidirectional | Synchronize signal for multi-part synchronization (master output / slave input); float if unused. |
| 31 | GND | power_in | Digital ground. |
| 32 | CA1 | bidirectional | LED Matrix A current output/input port. |
| 33 | CA2 | bidirectional | LED Matrix A current output/input port. |
| 34 | CA3 | bidirectional | LED Matrix A current output/input port. |
| 35 | CA4 | bidirectional | LED Matrix A current output/input port. |
| 36 | CA5 | bidirectional | LED Matrix A current output/input port. |
| 37 | CA6 | bidirectional | LED Matrix A current output/input port. |
| 38 | CA7 | bidirectional | LED Matrix A current output/input port. |
| 39 | CA8 | bidirectional | LED Matrix A current output/input port. |
| 40 | CA9 | bidirectional | LED Matrix A current output/input port. |
| 41 | GND | power_in | Thermal pad; connect to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Lumissil Microsystems |
| Package | QFN-40-EP(5x5) |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 2.7 | 5.5 | V | 7 | ||
| Shutdown current | ISD | 0.1 | 1 | μA | VSDB = 0V | 7 | |
| Logic 0 input voltage | VIL | 0 | 0.2 | V | VIO=3.6V; max printed as 0.2VIO, min as GND | 7 | |
| Logic 1 input voltage | VIH | 0.75 | 1 | V | VIO=3.6V; min printed as 0.75VIO, max as VIO (multipliers of VIO) | 7 | |
| Logic 0 output voltage for SYNC | VOL | 0.4 | V | IOL = 8mA | 7 | ||
| Logic 1 output voltage for SYNC | VOH | 0.75 | V | IOH = 8mA; printed as 0.75VIO (multiplier of VIO) | 7 | ||
| Logic 0 input current | IIL | 5 | nA | VINPUT = 0V (Note 4) | 7 | ||
| Logic 1 input current | IIH | 5 | nA | VINPUT = VIO (Note 4) | 7 | ||
| Output DC current of CA1 |
IOUT | 34 | mA | Matrix display mode without audio modulation (Note 1) | 7 | ||
| Serial-clock frequency (Fast Mode Plus) | fSCL | 1000 | kHz | Fast Mode Plus | 8 | ||
| Supply voltage absolute maximum | VCC | -0.3 | 6 | V | 7 | ||
| Voltage at any input pin | -0.3 | V | max printed as VCC+0.3V | 7 | |||
| Maximum junction temperature | TJMAX | 150 | °C | 7 | |||
| Storage temperature range | TSTG | -65 | 150 | °C | 7 | ||
| Operating temperature range | TA=TJ | -40 | 85 | °C | 7 | ||
| Thermal resistance, junction to ambient | θJA | 24.96 | °C/W | 7 | |||
| ESD (HBM) | -8 | 8 | kV | HBM | 7 | ||
| ESD (CDM) | -1 | 1 | kV | CDM | 7 | ||
| Quiescent power supply current | ICC | 2.17 | mA | Picture Mode, all LEDs off | 7 | ||
| Shutdown current, Software Shutdown 1 | ISD | 370 | μA | VSDB = VCC, Software Shutdown 1, Function Register 0Ah written "0000 0000" | 7 | ||
| Shutdown current, Software Shutdown 2 | ISD | 3 | μA | VSDB = VCC, Software Shutdown 2, Function Register 0Ah written "0000 0010" | 7 | ||
| Current sink headroom voltage | VHR | 350 | mV | C1~C9 ISINK = 270mA (Note 1, 2) | 7 | ||
| Current source headroom voltage | VHR | 350 | mV | C1~C9 ISOURCE = 34mA (Note 1) | 7 | ||
| Period of scanning | tSCAN | 43 | µs | Figure 4 | 7 | ||
| Non-overlap blanking time during scan | tSCANOL | 6 | µs | Figure 4 | 7 | ||
| Average current of each LED | ILED | 3.2 | mA | REXT = 20kΩ, PWM Register written "1111 1111" (Note 3) | 7 |
CAD (KiCad official)
- Symbol:
IS31FL3732A-QFLS2-TR - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
is31fl3732a-qfls2-tr-etched.step/is31fl3732a-qfls2-tr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);is31fl3732a-qfls2-tr.step/is31fl3732a-qfls2-tr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Lumissil Microsystems datasheet (27 pp, sha256
28bf1782e129e410, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).