Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

R1514H050B-T1-FE

Nisshinbo Micro Devices Inc. · Linear Voltage Regulators (LDO) · SOT-89-5

R1514H050B-T1-FE from Nisshinbo Micro Devices Inc., in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VOUT power_out Regulated output pin, with output voltage set to 2.0V to 12.0V in 0.1V steps at ±2% accuracy, and a recommended output capacitor C2 of 0.1μF to 10μF between VOUT and GND.
2 GND power_in Ground pin that must be wired to the GND plane when the device is mounted on the board.
3 CE input Chip enable pin, active high, with VCEH of 1.5V minimum to VIN and VCEL of 0.3V maximum, and it must not be left floating or held between VCEH and VCEL.
4 GND power_in Ground pin that must be wired to the GND plane when the device is mounted on the board.
5 VDD power_in Input pin with a recommended operating input voltage of 4V to 36V, an absolute maximum input voltage of 50V (60V peak for 200ms), and capacitor C1 connected between VDD and GND.

Key specifications

Parameter Value
Manufacturer Nisshinbo Micro Devices Inc.
Package SOT-89-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 4 36 V 5
Supply Current ISS 9 20 μA VIN=VOUT+3.0V, IOUT=0mA 5
Standby Current Istandby 0.1 1 μA VIN=36V, VCE=0V 5
Output Voltage (multiplier of nominal VOUT) VOUT 0.98 1.02 ×VOUT VIN=VOUT+3.0V, IOUT=1mA 5
Output Current IOUT 150 mA 5.0 ≤ VOUT ≤ 12.0, VIN=VOUT+3.0V 5
Load Regulation ΔVOUT/ΔIOUT 20 35 mV 5.0 ≤ VOUT ≤ 12.0, VIN=VOUT+3.0V, 1mA≤IOUT≤40mA 5
Line Regulation ΔVOUT/ΔVIN 0.05 0.2 %/V VOUT+1.5V ≤ VIN ≤ 36V, IOUT=1mA 5
Dropout Voltage VDIF 0.2 0.35 V 5.0 ≤ VOUT ≤ 12.0, IOUT=20mA 5
Output Voltage Temperature Coefficient ΔVOUT/ΔTopt -100 100 ppm/°C VIN=VOUT+3.0V, IOUT=1mA, −40°C ≤ Topt ≤ 105°C 5
CE Input Voltage "H" VCEH 1.5 V 5
CE Input Voltage "L" VCEL 0 0.3 V 5
Input Voltage (absolute maximum) VIN -0.3 50 V 4
Peak Input Voltage VIN 60 V Duration time=200ms 4
CE Input Voltage (absolute maximum) VCE -0.3 50 V 4
Output Voltage (absolute maximum) VOUT -0.3 50 V 4
Output Current (absolute maximum) IOUT 250 mA 4
Power Dissipation PD 900 mW SOT-89-5 package 4
Operating Temperature Range Topt -40 105 °C 4
Storage Temperature Range Tstg -55 125 °C 4
Thermal Shutdown Temperature TTSD 150 °C Junction temperature 5
Thermal Shutdown Released Temperature TTSR 125 °C Junction temperature 5
Short Current Limit ISC 50 mA VOUT=0V 5

CAD (KiCad official)

  • Symbol: R1514H050B-T1-FE
  • Footprint: Package_TO_SOT_SMD:SOT-89-5
  • 3D model: SOT-89-5 (KiCad packages3D, STEP)
  • 3D model files: r1514h050b-t1-fe-etched.step / r1514h050b-t1-fe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); r1514h050b-t1-fe.step / r1514h050b-t1-fe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Nisshinbo Micro Devices Inc. datasheet (15 pp, sha256 fd17e9a7da9eba81, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF