3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownR1514H050B-T1-FE
Nisshinbo Micro Devices Inc. · Linear Voltage Regulators (LDO) · SOT-89-5
R1514H050B-T1-FE from Nisshinbo Micro Devices Inc., in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Regulated output pin, with output voltage set to 2.0V to 12.0V in 0.1V steps at ±2% accuracy, and a recommended output capacitor C2 of 0.1μF to 10μF between VOUT and GND. |
| 2 | GND | power_in | Ground pin that must be wired to the GND plane when the device is mounted on the board. |
| 3 | CE | input | Chip enable pin, active high, with VCEH of 1.5V minimum to VIN and VCEL of 0.3V maximum, and it must not be left floating or held between VCEH and VCEL. |
| 4 | GND | power_in | Ground pin that must be wired to the GND plane when the device is mounted on the board. |
| 5 | VDD | power_in | Input pin with a recommended operating input voltage of 4V to 36V, an absolute maximum input voltage of 50V (60V peak for 200ms), and capacitor C1 connected between VDD and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nisshinbo Micro Devices Inc. |
| Package | SOT-89-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 4 | 36 | V | 5 | ||
| Supply Current | ISS | 9 | 20 | μA | VIN=VOUT+3.0V, IOUT=0mA | 5 | |
| Standby Current | Istandby | 0.1 | 1 | μA | VIN=36V, VCE=0V | 5 | |
| Output Voltage (multiplier of nominal VOUT) | VOUT | 0.98 | 1.02 | ×VOUT | VIN=VOUT+3.0V, IOUT=1mA | 5 | |
| Output Current | IOUT | 150 | mA | 5.0 ≤ VOUT ≤ 12.0, VIN=VOUT+3.0V | 5 | ||
| Load Regulation | ΔVOUT/ΔIOUT | 20 | 35 | mV | 5.0 ≤ VOUT ≤ 12.0, VIN=VOUT+3.0V, 1mA≤IOUT≤40mA | 5 | |
| Line Regulation | ΔVOUT/ΔVIN | 0.05 | 0.2 | %/V | VOUT+1.5V ≤ VIN ≤ 36V, IOUT=1mA | 5 | |
| Dropout Voltage | VDIF | 0.2 | 0.35 | V | 5.0 ≤ VOUT ≤ 12.0, IOUT=20mA | 5 | |
| Output Voltage Temperature Coefficient | ΔVOUT/ΔTopt | -100 | 100 | ppm/°C | VIN=VOUT+3.0V, IOUT=1mA, −40°C ≤ Topt ≤ 105°C | 5 | |
| CE Input Voltage "H" | VCEH | 1.5 | V | 5 | |||
| CE Input Voltage "L" | VCEL | 0 | 0.3 | V | 5 | ||
| Input Voltage (absolute maximum) | VIN | -0.3 | 50 | V | 4 | ||
| Peak Input Voltage | VIN | 60 | V | Duration time=200ms | 4 | ||
| CE Input Voltage (absolute maximum) | VCE | -0.3 | 50 | V | 4 | ||
| Output Voltage (absolute maximum) | VOUT | -0.3 | 50 | V | 4 | ||
| Output Current (absolute maximum) | IOUT | 250 | mA | 4 | |||
| Power Dissipation | PD | 900 | mW | SOT-89-5 package | 4 | ||
| Operating Temperature Range | Topt | -40 | 105 | °C | 4 | ||
| Storage Temperature Range | Tstg | -55 | 125 | °C | 4 | ||
| Thermal Shutdown Temperature | TTSD | 150 | °C | Junction temperature | 5 | ||
| Thermal Shutdown Released Temperature | TTSR | 125 | °C | Junction temperature | 5 | ||
| Short Current Limit | ISC | 50 | mA | VOUT=0V | 5 |
CAD (KiCad official)
- Symbol:
R1514H050B-T1-FE - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
r1514h050b-t1-fe-etched.step/r1514h050b-t1-fe-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);r1514h050b-t1-fe.step/r1514h050b-t1-fe.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nisshinbo Micro Devices Inc. datasheet (15 pp, sha256
fd17e9a7da9eba81, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).