3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA145UA
Texas Instruments · Differential Amplifiers · SOIC-8
INA145UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Ref | input | Reference terminal that a voltage can be applied to for offset trim, summed with the output; the source impedance should be less than 10Ω to maintain good common-mode rejection. |
| 2 | VIN- | power_in | Inverting input to the internal precision input resistor network; source impedance at both inputs must be nearly equal to keep common-mode rejection (a 5Ω mismatch degrades typical CMR to about 72dB). |
| 3 | VIN+ | power_in | Non-inverting input to the internal precision input resistor network; input common-mode range extends beyond the power supply rails, with CMR specified from VCM = -2.5V to +5.5V in single supply. |
| 4 | V- | power_in | Negative power supply; dual supplies of ±2.25V to ±18V are specified (operating range ±1.35V to ±18V), and supply bypass capacitors should be placed close to this pin. |
| 5 | RG | passive | Gain-setting connection for the external resistors RG1 and RG2, with gain G = 1 + RG2/RG1 programmable from 1 V/V to 1000 V/V. |
| 6 | VO | output | Amplifier output, specified at RL = 100kΩ to swing from (V-)+0.15V to (V+)-1V at G = 1 and stable for capacitive loads up to 1000pF. |
| 7 | V+ | power_in | Positive power supply; single-supply operation is specified from +4.5V to +36V (operating down to +2.7V), and bypass capacitors should be placed close to this pin. |
| 8 | VO1 | output | Output of amplifier A1, connected to the non-inverting input of A2 through a 10kΩ resistor trimmed to ±1% absolute accuracy; the A2 input is available for filter or precision current source applications. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage, V+ to V- | 36 | V | 4 | ||||
| Signal Input Terminals, Voltage | -80 | 80 | V | 4 | |||
| Signal Input Terminals, Current | -1 | 1 | mA | 4 | |||
| Operating Temperature | -55 | 125 | °C | 4 | |||
| Storage Temperature | -55 | 150 | °C | 4 | |||
| Junction Temperature | 150 | °C | 4 | ||||
| Lead Temperature (soldering, 10s) | 240 | °C | soldering, 10s | 4 | |||
| Input Offset Voltage (VS = ±2.25V to ±18V table) | VOS | -1 | 0.2 | 1 | mV | VCM = VO = 0V | 2 |
| Offset Voltage, V01 RTI | -0.4 | 0.4 | mV | 2 | |||
| Power Supply Rejection (vs Power Supply) | PSRR | -60 | 20 | 60 | µV/V | VS = ±1.35V to ±18V | 2 |
| Common-Mode Rejection Ratio | CMRR | 76 | 86 | dB | VCM = 2(V-) to 2(V+), 2V, RS = 0Ω | 2 | |
| Common-Mode Rejection Ratio, Over Temperature | CMRR | 70 | 80 | dB | Over temperature; VS = ±15V | 2 | |
| Bias Current | IB | -50 | 50 | nA | VCM = VS/2 | 2 | |
| Offset Current | IOS | -5 | 5 | nA | VCM = VS/2 | 2 | |
| Gain Error | -0.1 | 0.01 | 0.1 | % | RL = 100kΩ, VO = (V-)+0.15 to (V+)-1, G = 1 | 2 | |
| Gain Error vs Temperature | -10 | 2 | 10 | ppm/°C | RL = 100kΩ, VO = (V-)+0.25 to (V+)-1, G = 1 | 2 | |
| Nonlinearity | -0.005 | 0.0002 | 0.005 | % of FS | RL = 10kΩ, VO = (V-)+0.3 to (V+)-1.25, G = 1 | 2 | |
| Short-Circuit Current | -15 | 15 | mA | Continuous to Common | 2 | ||
| Specified Voltage Range, Dual Supplies | 2.25 | 18 | V | 2 | |||
| Operating Voltage Range | 1.35 | 18 | V | 2 | |||
| Quiescent Current | 570 | 700 | µA | VIN = 0, IO = 0 | 2 | ||
| Quiescent Current, Over Temperature | 800 | µA | 2 | ||||
| Specified Temperature Range | -40 | 85 | °C | 2 | |||
| Operating Temperature Range | -55 | 125 | °C | 2 | |||
| Storage Temperature Range | -55 | 125 | °C | 2 | |||
| Input Offset Voltage (VS = +5V single supply table) | VOS | -1 | 0.35 | 1 | mV | VCM = VO = 2.5V | 3 |
| Power Supply Rejection Ratio | PSRR | -60 | 20 | 60 | µV/°C | VS = ±1.35V to ±18V | 3 |
| Offset Voltage, V01 RTI | -0.55 | 0.55 | mV | 3 | |||
| Common-Mode Voltage Range | VCM | -2.5 | 5.5 | V | VIN+, VIN- = 0V, VO = 2.5V | 3 | |
| Common-Mode Rejection Ratio | CMRR | 76 | 86 | dB | VCM = -2.5V to +5.5V, RS = 0Ω | 3 | |
| Gain Error | -0.1 | 0.01 | 0.1 | % | RL = 100kΩ, VO = 0.15V to 4V, G = 1 | 3 | |
| Gain Error vs Temperature | -10 | 2 | 10 | ppm/°C | RL = 100kΩ, VO = 0.25V to 4V, G = 1 | 3 | |
| Nonlinearity | -0.005 | 0.001 | 0.005 | % of FS | RL = 10kΩ, VO = +0.3 to +3.75, G = 1 | 3 | |
| Voltage Output | 0.15 | 4 | V | RL = 100kΩ, G = 1 | 3 | ||
| Voltage Output, Over Temperature | 0.25 | 4 | V | Over temperature; RL = 100kΩ, G = 1 | 3 | ||
| Voltage Output | 0.3 | 3.75 | V | RL = 10kΩ, G = 1 | 3 | ||
| Voltage Output, Over Temperature | 0.5 | 3.75 | V | Over temperature; RL = 10kΩ, G = 1 | 3 | ||
| Specified Voltage Range, Single Supply | 4.5 | 36 | V | 3 | |||
| Operating Voltage Range | 2.7 | 36 | V | 3 | |||
| Quiescent Current | 550 | 700 | µA | VIN = 0, IO = 0 | 3 | ||
| Quiescent Current, Over Temperature | 800 | µA | 3 | ||||
| Input Offset Voltage (VS = ±15V table) | -0.5 | 0.5 | mV | VS = ±15V, VCM = VO = 0V | 4 | ||
| Input Offset Voltage vs Temperature | ∆VOS /∆T | -1 | 1 | µV/°C | 4 | ||
| Common-Mode Rejection Ratio | CMRR | 90 | dB | VCM = (V-) to (V+) -1 | 4 | ||
| Open Loop Gain | AOL | 110 | dB | 4 | |||
| Resistor at A1 Output, Error | -0.2 | 0.2 | % | 4 | |||
| Resistor at A1 Output, Temperature Drift Coefficient | -50 | 50 | ppm/°C | 4 | |||
| Resistor at A1 Output, Initial | 10 | kΩ | 4 | ||||
| Thermal Resistance, Junction-to-Ambient | θJA | 150 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
INA145UA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina145ua-2k5-etched.step/ina145ua-2k5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina145ua-2k5.step/ina145ua-2k5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (15 pp, sha256
d1c59305a0b47bb8, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).