Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA145UA

Texas Instruments · Differential Amplifiers · SOIC-8

INA145UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Ref input Reference terminal that a voltage can be applied to for offset trim, summed with the output; the source impedance should be less than 10Ω to maintain good common-mode rejection.
2 VIN- power_in Inverting input to the internal precision input resistor network; source impedance at both inputs must be nearly equal to keep common-mode rejection (a 5Ω mismatch degrades typical CMR to about 72dB).
3 VIN+ power_in Non-inverting input to the internal precision input resistor network; input common-mode range extends beyond the power supply rails, with CMR specified from VCM = -2.5V to +5.5V in single supply.
4 V- power_in Negative power supply; dual supplies of ±2.25V to ±18V are specified (operating range ±1.35V to ±18V), and supply bypass capacitors should be placed close to this pin.
5 RG passive Gain-setting connection for the external resistors RG1 and RG2, with gain G = 1 + RG2/RG1 programmable from 1 V/V to 1000 V/V.
6 VO output Amplifier output, specified at RL = 100kΩ to swing from (V-)+0.15V to (V+)-1V at G = 1 and stable for capacitive loads up to 1000pF.
7 V+ power_in Positive power supply; single-supply operation is specified from +4.5V to +36V (operating down to +2.7V), and bypass capacitors should be placed close to this pin.
8 VO1 output Output of amplifier A1, connected to the non-inverting input of A2 through a 10kΩ resistor trimmed to ±1% absolute accuracy; the A2 input is available for filter or precision current source applications.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage, V+ to V- 36 V 4
Signal Input Terminals, Voltage -80 80 V 4
Signal Input Terminals, Current -1 1 mA 4
Operating Temperature -55 125 °C 4
Storage Temperature -55 150 °C 4
Junction Temperature 150 °C 4
Lead Temperature (soldering, 10s) 240 °C soldering, 10s 4
Input Offset Voltage (VS = ±2.25V to ±18V table) VOS -1 0.2 1 mV VCM = VO = 0V 2
Offset Voltage, V01 RTI -0.4 0.4 mV 2
Power Supply Rejection (vs Power Supply) PSRR -60 20 60 µV/V VS = ±1.35V to ±18V 2
Common-Mode Rejection Ratio CMRR 76 86 dB VCM = 2(V-) to 2(V+), 2V, RS = 0Ω 2
Common-Mode Rejection Ratio, Over Temperature CMRR 70 80 dB Over temperature; VS = ±15V 2
Bias Current IB -50 50 nA VCM = VS/2 2
Offset Current IOS -5 5 nA VCM = VS/2 2
Gain Error -0.1 0.01 0.1 % RL = 100kΩ, VO = (V-)+0.15 to (V+)-1, G = 1 2
Gain Error vs Temperature -10 2 10 ppm/°C RL = 100kΩ, VO = (V-)+0.25 to (V+)-1, G = 1 2
Nonlinearity -0.005 0.0002 0.005 % of FS RL = 10kΩ, VO = (V-)+0.3 to (V+)-1.25, G = 1 2
Short-Circuit Current -15 15 mA Continuous to Common 2
Specified Voltage Range, Dual Supplies 2.25 18 V 2
Operating Voltage Range 1.35 18 V 2
Quiescent Current 570 700 µA VIN = 0, IO = 0 2
Quiescent Current, Over Temperature 800 µA 2
Specified Temperature Range -40 85 °C 2
Operating Temperature Range -55 125 °C 2
Storage Temperature Range -55 125 °C 2
Input Offset Voltage (VS = +5V single supply table) VOS -1 0.35 1 mV VCM = VO = 2.5V 3
Power Supply Rejection Ratio PSRR -60 20 60 µV/°C VS = ±1.35V to ±18V 3
Offset Voltage, V01 RTI -0.55 0.55 mV 3
Common-Mode Voltage Range VCM -2.5 5.5 V VIN+, VIN- = 0V, VO = 2.5V 3
Common-Mode Rejection Ratio CMRR 76 86 dB VCM = -2.5V to +5.5V, RS = 0Ω 3
Gain Error -0.1 0.01 0.1 % RL = 100kΩ, VO = 0.15V to 4V, G = 1 3
Gain Error vs Temperature -10 2 10 ppm/°C RL = 100kΩ, VO = 0.25V to 4V, G = 1 3
Nonlinearity -0.005 0.001 0.005 % of FS RL = 10kΩ, VO = +0.3 to +3.75, G = 1 3
Voltage Output 0.15 4 V RL = 100kΩ, G = 1 3
Voltage Output, Over Temperature 0.25 4 V Over temperature; RL = 100kΩ, G = 1 3
Voltage Output 0.3 3.75 V RL = 10kΩ, G = 1 3
Voltage Output, Over Temperature 0.5 3.75 V Over temperature; RL = 10kΩ, G = 1 3
Specified Voltage Range, Single Supply 4.5 36 V 3
Operating Voltage Range 2.7 36 V 3
Quiescent Current 550 700 µA VIN = 0, IO = 0 3
Quiescent Current, Over Temperature 800 µA 3
Input Offset Voltage (VS = ±15V table) -0.5 0.5 mV VS = ±15V, VCM = VO = 0V 4
Input Offset Voltage vs Temperature ∆VOS /∆T -1 1 µV/°C 4
Common-Mode Rejection Ratio CMRR 90 dB VCM = (V-) to (V+) -1 4
Open Loop Gain AOL 110 dB 4
Resistor at A1 Output, Error -0.2 0.2 % 4
Resistor at A1 Output, Temperature Drift Coefficient -50 50 ppm/°C 4
Resistor at A1 Output, Initial 10 kΩ 4
Thermal Resistance, Junction-to-Ambient θJA 150 °C/W 2

CAD (KiCad official)

  • Symbol: INA145UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ina145ua-2k5-etched.step / ina145ua-2k5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina145ua-2k5.step / ina145ua-2k5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (15 pp, sha256 d1c59305a0b47bb8, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF