component
FR9855SP
Public Made by Adomby adom
Fitipower Integrated Tech DC-DC Converters, SOIC-8-EP. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownFR9855SP
Fitipower Integrated Tech · DC-DC Converters · SOIC-8-EP
FR9855SP from Fitipower Integrated Tech, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Active-low shutdown / enable and mode-select input. SHDN=0V shuts the device down; 1.5V-2.5V selects forced PWM mode; >3.5V selects power-saving (PSM) mode. Tie to VIN through a 100kΩ resistor for self-startup in power-saving mode. Absolute max 20V; VIH(min)=1.5V, VIL(max)=0.5V. |
| 2 | FB | input | Voltage feedback input. Connect to VOUT via a resistive divider; the loop regulates FB to VFB = 0.765V (typ, 0.75V-0.78V). Feedback input current is 0.01µA typ. |
| 3 | PG | output | Open-drain power-good output. Pulls low when VFB is below ~85% of Vref (falling) and releases above ~90% (rising). Sink capability ~4mA. Requires an external pull-up resistor. |
| 4 | SS | passive | Soft-start pin. Connect a capacitor from SS to GND to program the soft-start ramp period; the pin sources ~6µA (ISS) into the capacitor. |
| 5 | GND | power_in | Signal / power ground return. |
| 6 | LX | output | Switching node between the internal high-side (70mΩ) and low-side (38mΩ) power MOSFETs. Connect the external inductor here. Absolute max -0.3V to VIN+0.3V (transient -5V to VIN+5V for 15ns). |
| 7 | BST | passive | High-side gate-drive bootstrap pin. Connect a 0.1µF-1µF capacitor from BST to LX to fully enhance the internal high-side NMOS. Absolute max VBST = VLX + 6.5V. |
| 8 | VIN | power_in | Power supply input, 4.5V to 18V operating (absolute max 20V). Place input decoupling capacitors as close as possible to VIN and GND to minimize noise coupling. |
| 9 | EP | power_in | Exposed thermal pad on the package underside. Must be soldered to a large PCB copper area tied to GND for maximum power dissipation (θJA = 60°C/W, θJC = 15°C/W). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Fitipower Integrated Tech |
| Package | SOIC-8-EP |
| Category | PMIC |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
FR9855SPFR9855SPDA
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage VIN | VIN | -0.3 | 20 | V | 5 | ||
| Enable Voltage | VSHDN | -0.3 | 20 | V | 5 | ||
| LX Voltage | VLX | -0.3 | V | max is VIN+0.3V | 5 | ||
| Dynamic LX Voltage | VLX | -5 | V | 15ns duration; max is VIN+5V | 5 | ||
| BST Pin Voltage | VBST | -0.3 | V | max is VLX+6.5V | 5 | ||
| All Other Pins Voltage | -0.3 | 6 | V | 5 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 5 | |||
| Storage Temperature | TS | -65 | 150 | °C | 5 | ||
| Lead Temperature (Soldering) | 260 | °C | 10 sec | 5 | |||
| Package Thermal Resistance θJA SOP-8 (Exposed Pad) | θJA | 60 | °C/W | Note 2: 25°C ambient, 4-layer JEDEC-51-7 board | 5 | ||
| Package Thermal Resistance θJC SOP-8 (Exposed Pad) | θJC | 15 | °C/W | Note 2: measured at exposed pad | 5 | ||
| Supply Voltage VIN (recommended) | VIN | 4.5 | 18 | V | 5 | ||
| Operation Temperature Range | -40 | 85 | °C | 5 | |||
| Feedback Voltage | VFB | 0.75 | 0.765 | 0.78 | V | 4.5V≦VIN≦18V | 6 |
| VIN Quiescent Current | IDDQ | 0.6 | 1 | mA | VSHDN=5V, VFB=1V | 6 | |
| VIN Shutdown Supply Current | ISD | 1 | 10 | µA | VSHDN=0V | 6 | |
| Feedback Input Current | IFB | 0.01 | 0.1 | µA | VFB=1V | 6 | |
| Input Supply Voltage UVLO Threshold | VUVLO(Vth) | 4.1 | V | VIN Rising | 6 | ||
| UVLO Threshold Hysteresis | VUVLO(HYS) | 0.35 | V | 6 | |||
| High-Side MOSFET RDS(ON) | RDS(ON) | 70 | mΩ | 6 | |||
| Low-Side MOSFET RDS(ON) | RDS(ON) | 38 | mΩ | 6 | |||
| Current Limit | ILIMIT | 6.8 | A | Note 3 (not production tested) | 6 | ||
| On Time | TON | 155 | ns | VIN=12V, VOUT=1.05V; Note 3 | 6 | ||
| Minimum Off Time | TOFF(MIN) | 250 | ns | VFB=0.6V | 6 | ||
| Soft Start Charge Current | ISS | 6 | µA | VSS=0V | 6 | ||
| SHDN Input Low Voltage | VSHDN(L) | 0.5 | V | 6 | |||
| SHDN Input High Voltage | VSHDN(H) | 1.5 | V | 6 | |||
| Power Good Threshold (VFB Rising, FR9855SP) | VPG | 90 | % | VFB Rising, FR9855SP; Note 3 | 6 | ||
| Power Good Threshold (VFB Falling, FR9855SP) | VPG | 85 | % | VFB Falling, FR9855SP; Note 3 | 6 | ||
| Power Good Sink Current | IPG | 4 | mA | VPG=0.5V, FR9855SP | 6 | ||
| Thermal Shutdown Threshold | TSD | 160 | °C | Note 3 (not production tested) | 6 | ||
| Thermal Shutdown Hysteresis | THYS | 30 | °C | Note 3 (not production tested) | 6 |
CAD (KiCad official)
- Symbol:
FR9855SP - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
fr9855sp-etched.step/fr9855sp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fr9855sp.step/fr9855sp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Fitipower Integrated Tech datasheet (16 pp, sha256
b6dded9e25acc343, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).