Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS61170DRVT

Texas Instruments · DC-DC Converters · WSON-6-EP(2x2)

TPS61170DRVT from Texas Instruments, in a WSON-6-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback pin for current; connect to center tap of resistor divider to program output voltage.
2 COMP output Output of transconductance error amplifier; connect external RC network for regulator compensation.
3 GND power_in Ground reference.
4 SW output Switching node of the IC; connect to switched side of inductor.
5 CTRL input Multifunctional control pin to enable device and control feedback voltage with PWM signal or digital communications.
6 VIN power_in Input supply pin for the IC; accept supply voltage from 3 V to 18 V.
7 Thermal Pad power_in Thermal pad for heat dissipation; solder to analog ground plane to avoid thermal issue.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-6-EP(2x2)
Category Power Management (PMIC)
Pins 7

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage on VIN VI -0.3 20 V 3
Voltage on CTRL VI -0.3 20 V 3
Voltage on FB and COMP VI -0.3 3 V 3
Voltage on SW VI -0.3 40 V 3
Operating junction temperature TJ -40 150 °C 3
Storage temperature Tstg -65 150 °C 3
Input voltage range VI 3 18 V 4
Output voltage range VO 38 V 4
Inductor L 10 22 μH 4
Output capacitor CO 1 10 μF 4
Operating ambient temperature TA -40 85 °C 4
Operating junction temperature TJ -40 125 °C 4
Input voltage range, VIN VI 3 18 V 5
Under-voltage lockout threshold UVLO 2.2 2.5 V VIN falling 5
CTRL pulldown resistor R(CTRL) 400 800 1600 kΩ 5
Voltage feedback regulation voltage VREF 1.204 1.229 1.254 V 5
Voltage feedback regulation voltage under reprogram V(REF_PWM) 477 492 507 mV VFB = 492 mV 5
Oscillator frequency fS 1 1.2 1.5 MHz 5
Maximum duty cycle Dmax 90 93 % VFB = 100 mV 5
Error amplifier transconductance Gea 240 320 400 μmho 5
N-channel MOSFET current limit ILIM 0.96 1.2 1.44 A D = Dmax 5
N-channel MOSFET on-resistance RDS(on) 0.3 0.6 Ω VIN = 3.6 V 5
Start-up N-channel MOSFET on-resistance (VIN = 3.0 V) RDS(on) 0.7 Ω VIN = 3.0 V 5
EasyScale end time of program stream tEOS 2 360 μs 6
EasyScale high time low bit (Logic 0) tH_LB 2 180 μs Logic 0 6
EasyScale low time low bit (Logic 0) tL_LB 360 μs Logic 0 6
EasyScale high time high bit (Logic 1) tH_HB 360 μs Logic 1 6
EasyScale low time high bit (Logic 1) tL_HB 2 180 μs Logic 1 6
Acknowledge output voltage low VACKNL 0.4 V Open drain, Rpullup =15 kΩ to Vin 6
Input capacitor CI 1 μF 4
Junction-to-ambient thermal resistance RθJA 66.5 °C/W 4
Junction-to-case (top) thermal resistance RθJC(top) 85.6 °C/W 4
Junction-to-board thermal resistance RθJB 36 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 7.1 °C/W 4
Operating quiescent current into VIN IQ 2.3 mA Device PWM switching no load 5
Shutdown current ISD 1 μA CRTL=GND, VIN = 4.2 V 5
Under-voltage lockout hysteresis Vhys 70 mV 5
CTRL logic high voltage V(CTRLh) 1.2 V VIN = 3 V to 18 V 5
CTRL logic low voltage V(CTRL) 0.4 V VIN = 3 V to 18 V 5
CTRL pulse width to shutdown toff 2.5 ms CTRL high to low 5
EasyScale detection time tes_det 260 μs CTRL pin low 5
EasyScale detection delay tes_delay 100 μs 5
EasyScale detection window time tes_win 1 ms 5
Voltage feedback input bias current IFB 200 nA VFB = 1.229 V 5
Minimum on pulse width tmin_on 40 ns 5
COMP pin sink current Isink 100 μA 5
COMP pin source current Isource 100 μA 5
Error amplifier output resistance Rea 6 MΩ 5 pF connected to COMP 5
Error amplifier crossover frequency fea 500 kHz 5 pF connected to COMP 5
N-channel leakage current ILN_NFET 1 μA VSW = 35 V, TA = 25°C 5
Start-up current limit ILIM_Start 0.7 A D = Dmax 5
Time step for half current limit tHalf_LIM 5 ms 5
Vref filter time constant tREF 180 μs 5
VREF ramp up time tstep 213 μs 5
EasyScale start time of program stream tstart 2 μs 6
Acknowledge valid time tvalACKN 2 μs See (2) 6
Duration of acknowledge condition tACKN 512 μs See (2) 6
Thermal shutdown threshold Tshutdown 160 °C 6
Thermal shutdown threshold hysteresis Thysteresis 15 °C 6

CAD (KiCad official)

  • Symbol: TPS61170DRVT
  • Footprint: Package_SON:WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm
  • 3D model: WSON-6-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps61170drvt-etched.step / tps61170drvt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps61170drvt.step / tps61170drvt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (37 pp, sha256 4d515bb23faa692e, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF