3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownUCC27444DR
Texas Instruments · Gate Drivers · SOIC-8
UCC27444DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ENA | input | Enable input for Channel A: biasing ENA LOW disables the Channel A output regardless of INA, and it has an internal pullup so Channel A is enabled by default if left floating, so TI recommends connecting it to VDD if unused. |
| 2 | INA | input | Non-inverting input to Channel A, which can be driven from -5 V to VDD+0.3 V per the absolute maximum ratings, and should be connected to GND if unused. |
| 3 | GND | power_in | Ground: all signals are referenced to this pin. |
| 4 | INB | input | Non-inverting input to Channel B, which can be driven from -5 V to VDD+0.3 V per the absolute maximum ratings, and should be connected to GND if unused. |
| 5 | OUTB | output | Channel B gate-drive output, which tolerates a 100-ns pulse down to -2 V and is rated to VDD+0.3 V. |
| 6 | VDD | power_in | Bias supply input with a 4.5 V to 18 V recommended operating range and an absolute maximum of 20 V, to be bypassed with ceramic capacitors of generally 1 μF and 0.1 μF referenced to GND. |
| 7 | OUTA | output | Channel A gate-drive output, which tolerates a 100-ns pulse down to -2 V and is rated to VDD+0.3 V. |
| 8 | ENB | input | Enable input for Channel B: biasing ENB LOW disables the Channel B output regardless of INB, and it has an internal pullup so Channel B is enabled by default if left floating, so TI recommends connecting it to VDD if unused. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, VDD | VDD | -0.3 | 20 | V | 4 | ||
| Output voltage, OUTA, OUTB DC | VOUT | -0.3 | V | DC; upper limit printed as VDD+0.3 V | 4 | ||
| Output voltage, OUTA, OUTB 100ns pulse | VOUT | -2 | V | 100ns pulse; upper limit printed as VDD+0.3 V | 4 | ||
| Input voltage INA, INB | VIN | -5 | V | upper limit printed as VDD+0.3 V | 4 | ||
| Input voltage ENA, ENB | VEN | -0.3 | V | upper limit printed as VDD+0.3 V | 4 | ||
| Operating junction temperature | TJ | -40 | 150 | °C | 4 | ||
| Lead temperature soldering | 300 | °C | Soldering, 10 sec. | 4 | |||
| Lead temperature reflow | 260 | °C | Reflow | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage, VDD (recommended) | VDD | 4.5 | 12 | 18 | V | 4 | |
| Input voltage, INA, INB (recommended) | VIN | -2 | V | upper limit printed as VDD | 4 | ||
| Output voltage, OUTA, OUTB (recommended) | VOUT | 0 | V | upper limit printed as VDD | 4 | ||
| Operating junction temperature (recommended) | TJ | -40 | 125 | °C | 4 | ||
| VDD static supply current | IVDD | 150 | 380 | uA | VINx = 3.3 V, ENx = VDD | 5 | |
| VDD static supply current | IVDD | 107 | 180 | uA | VINx = 0 V, ENx = VDD | 5 | |
| VDD operating current | IVDDO | 39 | 45 | mA | CLOAD = 1.8 nF, fSW = 1000 kHz, ENx = VDD, VINx = 0 V, 3.3 V PWM | 5 | |
| VDD disable current | IDIS | 450 | 570 | uA | VINx = 3.3 V, ENx = 0 V | 5 | |
| VDD POR rising threshold | VVDD_ON | 2.1 | 3 | 4 | V | 5 | |
| VDD POR falling threshold | VVDD_OFF | 1.8 | 2.7 | 3.5 | V | 5 | |
| Input signal high threshold | VINx_H | 1.6 | 2.2 | 2.5 | V | Output High, ENx = HIGH | 5 |
| Input signal low threshold | VINx_L | 0.8 | 1.2 | 1.5 | V | Output Low, ENx = HIGH | 5 |
| Enable signal high threshold | VENx_H | 1.7 | 2.3 | 2.7 | V | Output High, INx = HIGH | 5 |
| Enable signal low threshold | VENx_L | 1.1 | 1.8 | 2.2 | V | Output Low, INx = HIGH | 5 |
| EN pin pullup resistance | RENx | 100 | kΩ | ENx = 0 V | 5 | ||
| Peak output source current | ISRC | 4 | A | VDD = 14 V, CVDD = 10 µF, CL = 0.1 µF, f = 1 kHz | 5 | ||
| Peak output sink current | ISNK | -4 | A | VDD = 14 V, CVDD = 10 µF, CL = 0.1 µF, f = 1 kHz | 5 | ||
| Pullup resistance | ROH | 1.2 | 2.5 | Ω | IOUT = -10 mA | 5 | |
| Pulldown resistance | ROL | 0.7 | 1.2 | Ω | IOUT = 10 mA | 5 | |
| Rise time | tRx | 11 | 25 | ns | CLOAD = 1.8 nF, 10% to 90%, Vin = 0 V, 5 V | 6 | |
| Fall time | tFx | 7 | 23 | ns | CLOAD = 1.8 nF, 90% to 10%, Vin = 0 V, 5V | 6 | |
| Turn-on propagation delay | tD1x | 18 | 33 | ns | CLOAD = 1.8 nF, VINx_H of the input rise to 10% of output rise, Vin = 0 V -5 V, Fsw = 500 kHz, 50% duty cycle | 6 | |
| Turn-off propagation delay | tD2x | 30 | 50 | ns | CLOAD = 1.8 nF, VINx_L of the input fall to 90% of output fall, Vin = 0 V, 5 V, VDD= 5V -18V, Fsw = 500 kHz, 50% duty cycle | 6 | |
| Enable propagation delay | tD3x | 19 | 31 | ns | CLOAD = 1.8 nF, VENx_H of the enable rise to 10% of output rise, Vin = 0 V, 5 V, Fsw = 500 kHz, 50% duty cycle | 6 | |
| Disable propagation delay | tD4x | 24 | 52 | ns | CLOAD = 1.8 nF, VENx_L of the enable fall to 90% of output fall, Vin = 0 V, 5 V, Fsw = 500 kHz, 50% duty cycle | 6 | |
| Delay matching between two channels | tM | 1 | 5 | ns | CLOAD = 1.8 nF, Vin = 0 V, 5 V, Fsw = 500 kHz, 50% duty cycle, INA = INB, /tRA, tRB/, /tFA, tFB/ | 6 | |
| Minimum input pulse width | tPWmin | 8 | 22 | ns | CL = 1.8 nF, Vin = 0 V, 5 V, Fsw = 500 kHz, Vo > 1.5 V | 6 | |
| Junction-to-ambient thermal resistance (D package) | RθJA | 131.1 | °C/W | D (SOIC-8) package | 4 | ||
| Junction-to-case (top) thermal resistance (D package) | RθJC(top) | 73.4 | °C/W | D (SOIC-8) package | 4 | ||
| Junction-to-board thermal resistance (D package) | RθJB | 74.6 | °C/W | D (SOIC-8) package | 4 | ||
| Junction-to-top characterization parameter (D package) | ψJT | 25.6 | °C/W | D (SOIC-8) package | 4 | ||
| Junction-to-board characterization parameter (D package) | ψJB | 73.8 | °C/W | D (SOIC-8) package | 4 |
CAD (KiCad official)
- Symbol:
UCC27444DR - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ucc27444dr-etched.step/ucc27444dr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ucc27444dr.step/ucc27444dr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
19b0296c79504463, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).