main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ucc27444dr: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
ucc27444dr-etched.glb Publish 0.1.0 · Ray
ucc27444dr-etched.step ucc27444dr: factory component page (tier=mfr) · Ray
ucc27444dr-hero.glb ucc27444dr: hero GLB from the etched model (keeps the MPN mark) · Ray
ucc27444dr-hero.overlay.json Publish 0.1.0 · Ray
ucc27444dr.glb Publish 0.1.0 · Ray
ucc27444dr.kicad_mod Publish 0.1.0 · Ray
ucc27444dr.kicad_sym Publish 0.1.0 · Ray
ucc27444dr.lbr Publish 0.1.0 · Ray
ucc27444dr.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

UCC27444DR

Texas Instruments · Gate Drivers · SOIC-8

UCC27444DR from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ENA input Enable input for Channel A: biasing ENA LOW disables the Channel A output regardless of INA, and it has an internal pullup so Channel A is enabled by default if left floating, so TI recommends connecting it to VDD if unused.
2 INA input Non-inverting input to Channel A, which can be driven from -5 V to VDD+0.3 V per the absolute maximum ratings, and should be connected to GND if unused.
3 GND power_in Ground: all signals are referenced to this pin.
4 INB input Non-inverting input to Channel B, which can be driven from -5 V to VDD+0.3 V per the absolute maximum ratings, and should be connected to GND if unused.
5 OUTB output Channel B gate-drive output, which tolerates a 100-ns pulse down to -2 V and is rated to VDD+0.3 V.
6 VDD power_in Bias supply input with a 4.5 V to 18 V recommended operating range and an absolute maximum of 20 V, to be bypassed with ceramic capacitors of generally 1 μF and 0.1 μF referenced to GND.
7 OUTA output Channel A gate-drive output, which tolerates a 100-ns pulse down to -2 V and is rated to VDD+0.3 V.
8 ENB input Enable input for Channel B: biasing ENB LOW disables the Channel B output regardless of INB, and it has an internal pullup so Channel B is enabled by default if left floating, so TI recommends connecting it to VDD if unused.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Motor Driver ICs
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, VDD VDD -0.3 20 V 4
Output voltage, OUTA, OUTB DC VOUT -0.3 V DC; upper limit printed as VDD+0.3 V 4
Output voltage, OUTA, OUTB 100ns pulse VOUT -2 V 100ns pulse; upper limit printed as VDD+0.3 V 4
Input voltage INA, INB VIN -5 V upper limit printed as VDD+0.3 V 4
Input voltage ENA, ENB VEN -0.3 V upper limit printed as VDD+0.3 V 4
Operating junction temperature TJ -40 150 °C 4
Lead temperature soldering 300 °C Soldering, 10 sec. 4
Lead temperature reflow 260 °C Reflow 4
Storage temperature Tstg -65 150 °C 4
Supply voltage, VDD (recommended) VDD 4.5 12 18 V 4
Input voltage, INA, INB (recommended) VIN -2 V upper limit printed as VDD 4
Output voltage, OUTA, OUTB (recommended) VOUT 0 V upper limit printed as VDD 4
Operating junction temperature (recommended) TJ -40 125 °C 4
VDD static supply current IVDD 150 380 uA VINx = 3.3 V, ENx = VDD 5
VDD static supply current IVDD 107 180 uA VINx = 0 V, ENx = VDD 5
VDD operating current IVDDO 39 45 mA CLOAD = 1.8 nF, fSW = 1000 kHz, ENx = VDD, VINx = 0 V, 3.3 V PWM 5
VDD disable current IDIS 450 570 uA VINx = 3.3 V, ENx = 0 V 5
VDD POR rising threshold VVDD_ON 2.1 3 4 V 5
VDD POR falling threshold VVDD_OFF 1.8 2.7 3.5 V 5
Input signal high threshold VINx_H 1.6 2.2 2.5 V Output High, ENx = HIGH 5
Input signal low threshold VINx_L 0.8 1.2 1.5 V Output Low, ENx = HIGH 5
Enable signal high threshold VENx_H 1.7 2.3 2.7 V Output High, INx = HIGH 5
Enable signal low threshold VENx_L 1.1 1.8 2.2 V Output Low, INx = HIGH 5
EN pin pullup resistance RENx 100 kΩ ENx = 0 V 5
Peak output source current ISRC 4 A VDD = 14 V, CVDD = 10 µF, CL = 0.1 µF, f = 1 kHz 5
Peak output sink current ISNK -4 A VDD = 14 V, CVDD = 10 µF, CL = 0.1 µF, f = 1 kHz 5
Pullup resistance ROH 1.2 2.5 Ω IOUT = -10 mA 5
Pulldown resistance ROL 0.7 1.2 Ω IOUT = 10 mA 5
Rise time tRx 11 25 ns CLOAD = 1.8 nF, 10% to 90%, Vin = 0 V, 5 V 6
Fall time tFx 7 23 ns CLOAD = 1.8 nF, 90% to 10%, Vin = 0 V, 5V 6
Turn-on propagation delay tD1x 18 33 ns CLOAD = 1.8 nF, VINx_H of the input rise to 10% of output rise, Vin = 0 V -5 V, Fsw = 500 kHz, 50% duty cycle 6
Turn-off propagation delay tD2x 30 50 ns CLOAD = 1.8 nF, VINx_L of the input fall to 90% of output fall, Vin = 0 V, 5 V, VDD= 5V -18V, Fsw = 500 kHz, 50% duty cycle 6
Enable propagation delay tD3x 19 31 ns CLOAD = 1.8 nF, VENx_H of the enable rise to 10% of output rise, Vin = 0 V, 5 V, Fsw = 500 kHz, 50% duty cycle 6
Disable propagation delay tD4x 24 52 ns CLOAD = 1.8 nF, VENx_L of the enable fall to 90% of output fall, Vin = 0 V, 5 V, Fsw = 500 kHz, 50% duty cycle 6
Delay matching between two channels tM 1 5 ns CLOAD = 1.8 nF, Vin = 0 V, 5 V, Fsw = 500 kHz, 50% duty cycle, INA = INB, /tRA, tRB/, /tFA, tFB/ 6
Minimum input pulse width tPWmin 8 22 ns CL = 1.8 nF, Vin = 0 V, 5 V, Fsw = 500 kHz, Vo > 1.5 V 6
Junction-to-ambient thermal resistance (D package) RθJA 131.1 °C/W D (SOIC-8) package 4
Junction-to-case (top) thermal resistance (D package) RθJC(top) 73.4 °C/W D (SOIC-8) package 4
Junction-to-board thermal resistance (D package) RθJB 74.6 °C/W D (SOIC-8) package 4
Junction-to-top characterization parameter (D package) ψJT 25.6 °C/W D (SOIC-8) package 4
Junction-to-board characterization parameter (D package) ψJB 73.8 °C/W D (SOIC-8) package 4

CAD (KiCad official)

  • Symbol: UCC27444DR
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ucc27444dr-etched.step / ucc27444dr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ucc27444dr.step / ucc27444dr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 19b0296c79504463, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF