3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX1304F-AGC-A
HEXIN · DC-DC Converters · SOP-8
HX1304F-AGC-A from HEXIN, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback pin. Receives the divided output voltage from an external resistor divider (R2/R3). Regulated to VREF = 1.21V (typ); VOUT = 1.21V * [1 + (R2/R3)]. Input current 0.05 uA typ; absolute max -0.3V to 6V. |
| 2 | RT | input | Oscillator frequency setting pin. A single resistor from RT to GND sets the switching frequency per RT(kOhm) = 22000 / fOSC(kHz). Internally held at ~0.6V. Programmable range 150kHz to 500kHz; abs max -0.3V to 6V. |
| 3 | ILIM | input | Programmable current limit pin. Sources 8.5 uA (typ) through an external resistor RLIM to GND; when the low-side switch valley current exceeds the threshold set by RLIM, the next on-cycle is terminated. RLIM(kOhm) = 24 * IMAX(A). Abs max -0.3V to 6V. |
| 4 | VIN | power_in | Main input supply. Operating range 10V to 30V (abs max 35V). Requires a low-ESR bypass capacitor (>= 47 uF) close to the pin to prevent input voltage transients. |
| 5 | SW | power_out | Switch node output to the external inductor. Internally driven by the synchronous P-channel (high-side) and N-channel (low-side) MOSFETs. Abs max -0.3V to (VIN + 1V). Tie to pin 6. |
| 6 | SW | power_out | Switch node output to the external inductor (paralleled with pin 5 for higher current handling). Abs max -0.3V to (VIN + 1V). |
| 7 | GND | power_in | Ground reference for the controller and internal low-side MOSFET source. Tie to pin 8 and to the PCB ground plane close to the input capacitor. |
| 8 | GND | power_in | Ground reference (paralleled with pin 7). Provides the return path for input, output, and analog signals. Connect analog grounds to a common node and back to power ground behind the output capacitors. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HEXIN |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Operating Voltage Range | VIN | 10 | 30 | V | 3 | ||
| Quiescent Current | IQ | 10 | 15 | 20 | mA | ILOAD=0A | 3 |
| Shutdown Current | ISHDN | 110 | 150 | μA | 3 | ||
| Input UVLO Threshold | VUVLO | 4.25 | 4.5 | V | 3 | ||
| UVLO Hysteresis | ΔVUVLO | 50 | 100 | mV | 3 | ||
| Regulated Voltage | VFB | 1.188 | 1.21 | 1.236 | V | 3 | |
| Oscillator Frequency Range | fOSC | 150 | 500 | kHz | 3 | ||
| Oscillator Frequency | fOSC | 180 | 220 | 260 | kHz | RT=100k | 3 |
| Current Limit Sense Pin Source Current | ILIM-TH | 7 | 8.5 | 10 | μA | 3 | |
| Input Supply Voltage | -0.3 | 35 | V | 2 | |||
| FB, ILIM, RT Voltages | -0.3 | 6 | V | 2 | |||
| SW Voltage | -0.3 | V | upper limit printed as (VIN + 1V) | 2 | |||
| Operating Temperature Range | -40 | 85 | ℃ | Note 2: guaranteed to meet specifications from 0℃ to 70℃; -40℃ to 85℃ assured by design, characterization and SPC correlation | 2 | ||
| Storage Temperature Range | -65 | 150 | ℃ | 2 | |||
| Junction Temperature Range | 150 | ℃ | 2 | ||||
| Lead Temperature | 265 | ℃ | Soldering, 10 sec. | 2 | |||
| Feedback Pin Input Current | IFB | 0.05 | μA | 3 | |||
| Max Duty Cycle | DC | 100 | % | 3 | |||
| RDS(ON) of P-Channel FET | RPFET | 65 | mΩ | 3 | |||
| RDS(ON) of N-Channel FET | RNFET | 30 | mΩ | 3 | |||
| Thermal Shutdown Temperature | TSD | 125 | ℃ | Rising | 3 | ||
| Thermal Shutdown Hysteresis | ΔTSD | 30 | ℃ | 3 |
CAD (KiCad official)
- Symbol:
HX1304F-AGC-A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx1304f-agc-a-etched.step/hx1304f-agc-a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx1304f-agc-a.step/hx1304f-agc-a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HEXIN datasheet (10 pp, sha256
f1225ef65d172909, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).