Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

HX1304F-AGC-A

HEXIN · DC-DC Converters · SOP-8

HX1304F-AGC-A from HEXIN, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback pin. Receives the divided output voltage from an external resistor divider (R2/R3). Regulated to VREF = 1.21V (typ); VOUT = 1.21V * [1 + (R2/R3)]. Input current 0.05 uA typ; absolute max -0.3V to 6V.
2 RT input Oscillator frequency setting pin. A single resistor from RT to GND sets the switching frequency per RT(kOhm) = 22000 / fOSC(kHz). Internally held at ~0.6V. Programmable range 150kHz to 500kHz; abs max -0.3V to 6V.
3 ILIM input Programmable current limit pin. Sources 8.5 uA (typ) through an external resistor RLIM to GND; when the low-side switch valley current exceeds the threshold set by RLIM, the next on-cycle is terminated. RLIM(kOhm) = 24 * IMAX(A). Abs max -0.3V to 6V.
4 VIN power_in Main input supply. Operating range 10V to 30V (abs max 35V). Requires a low-ESR bypass capacitor (>= 47 uF) close to the pin to prevent input voltage transients.
5 SW power_out Switch node output to the external inductor. Internally driven by the synchronous P-channel (high-side) and N-channel (low-side) MOSFETs. Abs max -0.3V to (VIN + 1V). Tie to pin 6.
6 SW power_out Switch node output to the external inductor (paralleled with pin 5 for higher current handling). Abs max -0.3V to (VIN + 1V).
7 GND power_in Ground reference for the controller and internal low-side MOSFET source. Tie to pin 8 and to the PCB ground plane close to the input capacitor.
8 GND power_in Ground reference (paralleled with pin 7). Provides the return path for input, output, and analog signals. Connect analog grounds to a common node and back to power ground behind the output capacitors.

Key specifications

Parameter Value
Manufacturer HEXIN
Package SOP-8
Category PMIC
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Operating Voltage Range VIN 10 30 V 3
Quiescent Current IQ 10 15 20 mA ILOAD=0A 3
Shutdown Current ISHDN 110 150 μA 3
Input UVLO Threshold VUVLO 4.25 4.5 V 3
UVLO Hysteresis ΔVUVLO 50 100 mV 3
Regulated Voltage VFB 1.188 1.21 1.236 V 3
Oscillator Frequency Range fOSC 150 500 kHz 3
Oscillator Frequency fOSC 180 220 260 kHz RT=100k 3
Current Limit Sense Pin Source Current ILIM-TH 7 8.5 10 μA 3
Input Supply Voltage -0.3 35 V 2
FB, ILIM, RT Voltages -0.3 6 V 2
SW Voltage -0.3 V upper limit printed as (VIN + 1V) 2
Operating Temperature Range -40 85 ℃ Note 2: guaranteed to meet specifications from 0℃ to 70℃; -40℃ to 85℃ assured by design, characterization and SPC correlation 2
Storage Temperature Range -65 150 ℃ 2
Junction Temperature Range 150 ℃ 2
Lead Temperature 265 ℃ Soldering, 10 sec. 2
Feedback Pin Input Current IFB 0.05 μA 3
Max Duty Cycle DC 100 % 3
RDS(ON) of P-Channel FET RPFET 65 mΩ 3
RDS(ON) of N-Channel FET RNFET 30 mΩ 3
Thermal Shutdown Temperature TSD 125 ℃ Rising 3
Thermal Shutdown Hysteresis ΔTSD 30 ℃ 3

CAD (KiCad official)

  • Symbol: HX1304F-AGC-A
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: hx1304f-agc-a-etched.step / hx1304f-agc-a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hx1304f-agc-a.step / hx1304f-agc-a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HEXIN datasheet (10 pp, sha256 f1225ef65d172909, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF