Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

65LBC174AM16DWREP

Texas Instruments · RS-485/RS-422 ICs · SOIC-16-300mil

65LBC174AM16DWREP from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1A input Port 1 A data input; logic input with VIL of 0.8 V maximum and input voltage limited to VCC + 0.5 V.
2 1Y tri_state Bus port 1 Y, complementary to 1 Z; recommended bus terminal voltage range is -7 V to 12 V.
3 1Z tri_state Bus port 1 Z, complementary to 1 Y; recommended bus terminal voltage range is -7 V to 12 V.
4 1,2EN input Driver enable for ports 1 and 2; a high level enables the differential outputs and a low level places them in high impedance.
5 2Z tri_state Bus port 2 Z, complementary to 2 Y; recommended bus terminal voltage range is -7 V to 12 V.
6 2Y tri_state Bus port 2 Y, complementary to 2 Z; recommended bus terminal voltage range is -7 V to 12 V.
7 2A input Port 2 A data input; logic input with VIL of 0.8 V maximum and input voltage limited to VCC + 0.5 V.
8 GND power_in Device ground; all voltages except differential bus voltages are referenced to GND.
9 3A input Port 3 A data input; logic input with VIL of 0.8 V maximum and input voltage limited to VCC + 0.5 V.
10 3Y tri_state Bus port 3 Y, complementary to 3 Z; recommended bus terminal voltage range is -7 V to 12 V.
11 3Z tri_state Bus port 3 Z, complementary to 3 Y; recommended bus terminal voltage range is -7 V to 12 V.
12 3,4EN input Driver enable for ports 3 and 4; a high level enables the differential outputs and a low level places them in high impedance.
13 4Z tri_state Bus port 4 Z, complementary to 4 Y; recommended bus terminal voltage range is -7 V to 12 V.
14 4Y tri_state Bus port 4 Y, complementary to 4 Z; recommended bus terminal voltage range is -7 V to 12 V.
15 4A input Port 4 A data input; logic input with VIL of 0.8 V maximum and input voltage limited to VCC + 0.5 V.
16 VCC power_in Device power supply; 4.75 V to 5.25 V recommended with 5 V nominal and 6 V absolute maximum.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input clamp voltage VIK -1.5 -0.77 V II = -18 mA 6
Open-circuit output voltage VO 0 V Y or Z, No load 6
Steady-state differential output voltage magnitude, no load /VOD(SS)/ 3 V No load (open circuit) 6
Steady-state differential output voltage magnitude, RL = 54 Ω /VOD(SS)/ 0.8 1.6 2.5 V RL = 54 Ω, See Figure 7 6
Steady-state differential output voltage magnitude, common-mode loading /VOD(SS)/ 0.8 1.6 2.5 V With common-mode loading, See Figure 8 6
Change in steady-state differential output voltage between logic states ΔVOD(SS) -0.1 0.1 V See Figure 7 6
Steady-state common-mode output voltage VOC(SS) 2 2.4 2.8 V See Figure 9 6
Change in steady-state common-mode output voltage between logic states ΔVOC(SS) -0.04 0.04 V See Figure 9 6
Input current II -70 70 μA A, G, G 6
Short-circuit output current IOS -200 200 mA VTEST = -7 V to 12 V, See Figure 13; VI = 0 V, VI = VCC 6
High-impedance-state output current IOZ -50 50 μA EN at 0 V 6
Output current with power off IO(OFF) -10 10 μA VCC = 0 V 6
Supply current, all drivers enabled ICC 25 mA VI = 0 V or VCC, No load 6
Supply current, all drivers disabled ICC 1.5 mA VI = 0 V or VCC, No load 6
Propagation delay time, low-to-high-level output, TA = 25°C tPLH 4 8 11 ns RL = 54 Ω, CL = 50 pF, See Figure 10; TA = 25°C 7
Propagation delay time, low-to-high-level output, TA = -55°C to 125°C tPLH 4 16 ns RL = 54 Ω, CL = 50 pF, See Figure 10; TA = -55°C to 125°C 7
Propagation delay time, high-to-low-level output, TA = 25°C tPHL 4 8 11 ns RL = 54 Ω, CL = 50 pF, See Figure 10; TA = 25°C 7
Propagation delay time, high-to-low-level output, TA = -55°C to 125°C tPHL 4 16 ns RL = 54 Ω, CL = 50 pF, See Figure 10; TA = -55°C to 125°C 7
Differential output voltage rise time, TA = 25°C tr 3 7.5 11 ns RL = 54 Ω, CL = 50 pF, See Figure 10; TA = 25°C 7
Differential output voltage rise time, TA = -55°C to 125°C tr 3 24 ns RL = 54 Ω, CL = 50 pF, See Figure 10; TA = -55°C to 125°C 7
Differential output voltage fall time, TA = 25°C tf 3 7.5 11 ns RL = 54 Ω, CL = 50 pF, See Figure 10; TA = 25°C 7
Differential output voltage fall time, TA = -55°C to 125°C tf 3 24 ns RL = 54 Ω, CL = 50 pF, See Figure 10; TA = -55°C to 125°C 7
Pulse skew /tPLH, tPHL/ tsk(p) 0.6 ns 7
Output skew tsk(o) 2 ns 7
Part-to-part skew tsk(pp) 3 ns 7
Propagation delay time, high impedance to high-level output tPZH 25 ns See Figure 11 7
Propagation delay time, high-level output to high impedance tPHZ 25 ns See Figure 11 7
Propagation delay time, high impedance to low-level output tPZL 30 ns See Figure 12 7
Propagation delay time, low-level output to high impedance tPLZ 20 ns See Figure 12 7
Supply voltage VCC -0.3 6 V 5
Voltage at any bus (dc) -10 15 V 5
Voltage at any bus (transient pulse) -30 30 V transient pulse through 100 Ω, See Figure 14 5
Input voltage at any A or EN terminal VI -0.5 V 5
Storage temperature Tstg -65 150 °C 5
Lead temperature 260 °C 1.6 mm (1/16 in) from case for 10 s 5
Supply voltage VCC 4.75 5 5.25 V 5
Voltage at any bus terminal Y, Z -7 12 V 5
High-level input voltage A, EN VIH 2 V 5
Low-level input voltage A, EN VIL 0 0.8 V 5
Output current -60 60 mA 5
Operating free-air temperature TA -55 125 °C 5
Junction-to-ambient thermal resistance (16-pin DW) RθJA 60.4 °C/W 5
Junction-to-case (top) thermal resistance (16-pin DW) RθJC(top) 24.3 °C/W 5
Junction-to-board thermal resistance (16-pin DW) RθJB 26.1 °C/W 5
Junction-to-top characterization parameter (16-pin DW) ψJT 4.1 °C/W 5
Junction-to-board characterization parameter (16-pin DW) ψJB 25.6 °C/W 5

CAD (KiCad official)

  • Symbol: 65LBC174AM16DWREP
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: 65lbc174am16dwrep-etched.step / 65lbc174am16dwrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 65lbc174am16dwrep.step / 65lbc174am16dwrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (32 pp, sha256 8174eaa6473fb31e, retrieved 2026-11-12, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF