Generated by kicad-footprint-generator · KiCad file format 20260206
65LBC174AM16DWREP
Texas Instruments · RS-485/RS-422 ICs · SOIC-16-300mil
65LBC174AM16DWREP from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1A | input | Port 1 A data input; logic input with VIL of 0.8 V maximum and input voltage limited to VCC + 0.5 V. |
| 2 | 1Y | tri_state | Bus port 1 Y, complementary to 1 Z; recommended bus terminal voltage range is -7 V to 12 V. |
| 3 | 1Z | tri_state | Bus port 1 Z, complementary to 1 Y; recommended bus terminal voltage range is -7 V to 12 V. |
| 4 | 1,2EN | input | Driver enable for ports 1 and 2; a high level enables the differential outputs and a low level places them in high impedance. |
| 5 | 2Z | tri_state | Bus port 2 Z, complementary to 2 Y; recommended bus terminal voltage range is -7 V to 12 V. |
| 6 | 2Y | tri_state | Bus port 2 Y, complementary to 2 Z; recommended bus terminal voltage range is -7 V to 12 V. |
| 7 | 2A | input | Port 2 A data input; logic input with VIL of 0.8 V maximum and input voltage limited to VCC + 0.5 V. |
| 8 | GND | power_in | Device ground; all voltages except differential bus voltages are referenced to GND. |
| 9 | 3A | input | Port 3 A data input; logic input with VIL of 0.8 V maximum and input voltage limited to VCC + 0.5 V. |
| 10 | 3Y | tri_state | Bus port 3 Y, complementary to 3 Z; recommended bus terminal voltage range is -7 V to 12 V. |
| 11 | 3Z | tri_state | Bus port 3 Z, complementary to 3 Y; recommended bus terminal voltage range is -7 V to 12 V. |
| 12 | 3,4EN | input | Driver enable for ports 3 and 4; a high level enables the differential outputs and a low level places them in high impedance. |
| 13 | 4Z | tri_state | Bus port 4 Z, complementary to 4 Y; recommended bus terminal voltage range is -7 V to 12 V. |
| 14 | 4Y | tri_state | Bus port 4 Y, complementary to 4 Z; recommended bus terminal voltage range is -7 V to 12 V. |
| 15 | 4A | input | Port 4 A data input; logic input with VIL of 0.8 V maximum and input voltage limited to VCC + 0.5 V. |
| 16 | VCC | power_in | Device power supply; 4.75 V to 5.25 V recommended with 5 V nominal and 6 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input clamp voltage | VIK | -1.5 | -0.77 | V | II = -18 mA | 6 | |
| Open-circuit output voltage | VO | 0 | V | Y or Z, No load | 6 | ||
| Steady-state differential output voltage magnitude, no load | /VOD(SS)/ | 3 | V | No load (open circuit) | 6 | ||
| Steady-state differential output voltage magnitude, RL = 54 Ω | /VOD(SS)/ | 0.8 | 1.6 | 2.5 | V | RL = 54 Ω, See Figure 7 | 6 |
| Steady-state differential output voltage magnitude, common-mode loading | /VOD(SS)/ | 0.8 | 1.6 | 2.5 | V | With common-mode loading, See Figure 8 | 6 |
| Change in steady-state differential output voltage between logic states | ΔVOD(SS) | -0.1 | 0.1 | V | See Figure 7 | 6 | |
| Steady-state common-mode output voltage | VOC(SS) | 2 | 2.4 | 2.8 | V | See Figure 9 | 6 |
| Change in steady-state common-mode output voltage between logic states | ΔVOC(SS) | -0.04 | 0.04 | V | See Figure 9 | 6 | |
| Input current | II | -70 | 70 | μA | A, G, G | 6 | |
| Short-circuit output current | IOS | -200 | 200 | mA | VTEST = -7 V to 12 V, See Figure 13; VI = 0 V, VI = VCC | 6 | |
| High-impedance-state output current | IOZ | -50 | 50 | μA | EN at 0 V | 6 | |
| Output current with power off | IO(OFF) | -10 | 10 | μA | VCC = 0 V | 6 | |
| Supply current, all drivers enabled | ICC | 25 | mA | VI = 0 V or VCC, No load | 6 | ||
| Supply current, all drivers disabled | ICC | 1.5 | mA | VI = 0 V or VCC, No load | 6 | ||
| Propagation delay time, low-to-high-level output, TA = 25°C | tPLH | 4 | 8 | 11 | ns | RL = 54 Ω, CL = 50 pF, See Figure 10; TA = 25°C | 7 |
| Propagation delay time, low-to-high-level output, TA = -55°C to 125°C | tPLH | 4 | 16 | ns | RL = 54 Ω, CL = 50 pF, See Figure 10; TA = -55°C to 125°C | 7 | |
| Propagation delay time, high-to-low-level output, TA = 25°C | tPHL | 4 | 8 | 11 | ns | RL = 54 Ω, CL = 50 pF, See Figure 10; TA = 25°C | 7 |
| Propagation delay time, high-to-low-level output, TA = -55°C to 125°C | tPHL | 4 | 16 | ns | RL = 54 Ω, CL = 50 pF, See Figure 10; TA = -55°C to 125°C | 7 | |
| Differential output voltage rise time, TA = 25°C | tr | 3 | 7.5 | 11 | ns | RL = 54 Ω, CL = 50 pF, See Figure 10; TA = 25°C | 7 |
| Differential output voltage rise time, TA = -55°C to 125°C | tr | 3 | 24 | ns | RL = 54 Ω, CL = 50 pF, See Figure 10; TA = -55°C to 125°C | 7 | |
| Differential output voltage fall time, TA = 25°C | tf | 3 | 7.5 | 11 | ns | RL = 54 Ω, CL = 50 pF, See Figure 10; TA = 25°C | 7 |
| Differential output voltage fall time, TA = -55°C to 125°C | tf | 3 | 24 | ns | RL = 54 Ω, CL = 50 pF, See Figure 10; TA = -55°C to 125°C | 7 | |
| Pulse skew /tPLH, tPHL/ | tsk(p) | 0.6 | ns | 7 | |||
| Output skew | tsk(o) | 2 | ns | 7 | |||
| Part-to-part skew | tsk(pp) | 3 | ns | 7 | |||
| Propagation delay time, high impedance to high-level output | tPZH | 25 | ns | See Figure 11 | 7 | ||
| Propagation delay time, high-level output to high impedance | tPHZ | 25 | ns | See Figure 11 | 7 | ||
| Propagation delay time, high impedance to low-level output | tPZL | 30 | ns | See Figure 12 | 7 | ||
| Propagation delay time, low-level output to high impedance | tPLZ | 20 | ns | See Figure 12 | 7 | ||
| Supply voltage | VCC | -0.3 | 6 | V | 5 | ||
| Voltage at any bus (dc) | -10 | 15 | V | 5 | |||
| Voltage at any bus (transient pulse) | -30 | 30 | V | transient pulse through 100 Ω, See Figure 14 | 5 | ||
| Input voltage at any A or EN terminal | VI | -0.5 | V | 5 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 5 | ||
| Lead temperature | 260 | °C | 1.6 mm (1/16 in) from case for 10 s | 5 | |||
| Supply voltage | VCC | 4.75 | 5 | 5.25 | V | 5 | |
| Voltage at any bus terminal Y, Z | -7 | 12 | V | 5 | |||
| High-level input voltage A, EN | VIH | 2 | V | 5 | |||
| Low-level input voltage A, EN | VIL | 0 | 0.8 | V | 5 | ||
| Output current | -60 | 60 | mA | 5 | |||
| Operating free-air temperature | TA | -55 | 125 | °C | 5 | ||
| Junction-to-ambient thermal resistance (16-pin DW) | RθJA | 60.4 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (16-pin DW) | RθJC(top) | 24.3 | °C/W | 5 | |||
| Junction-to-board thermal resistance (16-pin DW) | RθJB | 26.1 | °C/W | 5 | |||
| Junction-to-top characterization parameter (16-pin DW) | ψJT | 4.1 | °C/W | 5 | |||
| Junction-to-board characterization parameter (16-pin DW) | ψJB | 25.6 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
65LBC174AM16DWREP - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
65lbc174am16dwrep-etched.step/65lbc174am16dwrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);65lbc174am16dwrep.step/65lbc174am16dwrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (32 pp, sha256
8174eaa6473fb31e, retrieved 2026-11-12, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).