component
DGD2106MS8-13
Public Made by Adomby adom
Diodes Incorporated Gate Drivers, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownDGD2106MS8-13
Diodes Incorporated · Gate Drivers · SO-8
DGD2106MS8-13 from Diodes Incorporated, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Low-side and logic fixed supply, recommended operating range 10 V to 20 V (absolute maximum -0.3 to +24 V). |
| 2 | HIN | input | Logic input for the high-side gate driver output, in phase with HO; Schmitt-triggered with internal pull-down, TTL/CMOS compatible down to 3.3 V, with logic input voltage rated 0 V to 5 V. |
| 3 | LIN | input | Logic input for the low-side gate driver output, in phase with LO; Schmitt-triggered with internal pull-down, TTL/CMOS compatible down to 3.3 V, with logic input voltage rated 0 V to 5 V. |
| 4 | COM | power_in | Logic and low-side return; the reference for the HIN/LIN inputs and the HO/LO outputs. |
| 5 | LO | output | Low-side gate drive output, swinging between 0 V and VCC, with pulsed sink current of 600 mA typical (PW ≤ 10 µs). |
| 6 | VS | power_in | High-side floating supply return; logic operation is specified for VS from -5 V to +600 V, with VS offset supply transient dVS/dt of 50 V/ns maximum. |
| 7 | HO | output | High-side gate drive output, floating and referenced to VS, swinging between VS and VB. |
| 8 | VB | power_in | High-side floating supply, recommended operating range VS + 10 V to VS + 20 V (absolute maximum -0.3 to +624 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SO-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Logic “1” Input Voltage | VIH | 2.5 | V | VCC = 10V to 20V | 4 | ||
| Logic “0” Input Voltage | VIL | 0.6 | V | VCC = 10V to 20V | 4 | ||
| High Level Output Voltage, VBIAS - VO | VOH | 0.05 | 0.2 | V | IO = 2mA | 4 | |
| Low Level Output Voltage, VO | VOL | 0.02 | 0.1 | V | IO = 2mA | 4 | |
| Offset Supply Leakage Current | ILK | 50 | µA | VB = VS = 600V | 4 | ||
| Quiescent VBS Supply Current | IBSQ | 20 | 75 | 130 | µA | VIN = 0V or 5V | 4 |
| Quiescent VCC Supply Current | ICCQ | 60 | 120 | 180 | µA | VIN = 0V or 5V | 4 |
| Logic “1” Input Bias Current | IIN+ | 5 | 20 | µA | VIN = 5V | 4 | |
| Logic “0” Input Bias Current | IIN- | 2 | µA | VIN = 0V | 4 | ||
| VBS Supply Undervoltage Positive Going Threshold | VBSUV+ | 7 | 8.4 | 9.8 | V | 4 | |
| VBS Supply Undervoltage Negative Going Threshold | VBSUV- | 6.4 | 7.8 | 9 | V | 4 | |
| VCC Supply Undervoltage Positive Going Threshold | VCCUV+ | 7 | 8.4 | 9.8 | V | 4 | |
| VCC Supply Undervoltage Negative Going Threshold | VCCUV- | 6.4 | 7.8 | 9 | V | 4 | |
| Hysterisis (VCC) | VCCUVH | 0.3 | 0.7 | V | 4 | ||
| Hysterisis (VBS) | VBSUVH | 0.3 | 0.7 | V | 4 | ||
| Output High Short Circuit Pulsed Current | IO+ | 130 | 290 | mA | VO = 0V, PW ≤ 10µs | 4 | |
| Output Low Short Circuit Pulsed Current | IO- | 270 | 600 | mA | VO = 15V, PW ≤ 10µs | 4 | |
| Turn-On Propagation Delay | tON | 100 | 300 | ns | VS = 0V | 4 | |
| Turn-Off Propagation Delay | tOFF | 100 | 280 | ns | VS = 0V or 600V | 4 | |
| Delay Matching | tDM | 30 | ns | 4 | |||
| Turn-On Rise Time | tR | 90 | 220 | ns | VS = 0V | 4 | |
| Turn-Off Fall Time | tF | 30 | 80 | ns | VS = 0V | 4 | |
| High Side Floating Supply Offset Voltage | VS | 600 | V | Note 6: logic operation for VS of -5V to +600V | 3 | ||
| Low Side and Logic Fixed Supply Voltage | VCC | 10 | 20 | V | 3 | ||
| Low Side Output Voltage | VLO | 0 | V | 3 | |||
| Logic Input Voltage | VIN | 0 | 5 | V | 3 | ||
| Ambient Temperature | TA | -40 | 125 | °C | 3 | ||
| High-Side Floating Supply Voltage | VB | -0.3 | 624 | V | 3 | ||
| Offset Supply Voltage Transient | dVS / dt | 50 | V/ns | 3 | |||
| Low-Side and Logic Fixed Supply Voltage | VCC | -0.3 | 24 | V | 3 | ||
| Operating Temperature | TJ | 150 | °C | 3 | |||
| Lead Temperature (Soldering) | TL | 300 | °C | 10s | 3 | ||
| Storage Temperature Range | TSTG | -55 | 150 | °C | 3 | ||
| Power Dissipation Linear Derating Factor | PD | 0.625 | W | Note 5: standard JEDEC 2-layer FR-4 board | 3 | ||
| Thermal Resistance, Junction to Ambient | RθJA | 200 | °C/W | Note 5: standard JEDEC 2-layer FR-4 board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads. Solderable per MILSTD-202, Method 208 Weight: 0.075 grams (Approximate) | 1 |
CAD (KiCad official)
- Symbol:
DGD2106MS8-13 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
dgd2106ms8-13-etched.step/dgd2106ms8-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dgd2106ms8-13.step/dgd2106ms8-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (11 pp, sha256
a371f83d1e749fa6, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).