Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F26K22-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)

PIC18F26K22-E from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2/C2IN+/AN2/DACOUT/VREF- bidirectional TTL digital I/O shared with comparator C2 noninverting input, analog input 2, DAC reference output and A/D low reference voltage input.
2 RA3/C1IN+/AN3/VREF+ bidirectional TTL digital I/O shared with comparator C1 noninverting input, analog input 3 and A/D high reference voltage input.
3 RA4/CCP5/C1OUT/SRQ/T0CKI bidirectional Schmitt Trigger digital I/O shared with CCP5, comparator C1 output, SR latch Q output and Timer0 external clock input.
4 RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 bidirectional TTL digital I/O shared with comparator C2 output, SR latch output, MSSP1 SPI client select input, High/Low-Voltage Detect input and analog input 4.
5 VSS power_in Ground reference for logic and I/O pins.
6 RA7/CLKI/OSC1 bidirectional TTL digital I/O shared with external clock source input and oscillator crystal input (OSC1).
7 RA6/CLKO/OSC2 bidirectional TTL digital I/O shared with CLKOUT (1/4 the OSC1 frequency in RC mode) and oscillator crystal output (OSC2).
8 RC0/P2B/T3CKI/T3G/T1CKI/SOSCO bidirectional Schmitt Trigger digital I/O shared with alternate P2B PWM output, Timer3 clock input, Timer3 gate input, Timer1 clock input and secondary oscillator output.
9 RC1/P2A/CCP2/SOSCI bidirectional Schmitt Trigger digital I/O shared with Enhanced CCP2 PWM output P2A, CCP2 (default pin) and secondary oscillator input.
10 RC2/CTPLS/P1A/CCP1/T5CKI/AN14 bidirectional Schmitt Trigger digital I/O shared with CTMU pulse generator output, ECCP1 PWM output P1A/CCP1, Timer5 clock input and analog input 14.
11 RC3/SCK1/SCL1/AN15 bidirectional Schmitt Trigger digital I/O shared with MSSP1 SPI/I2C clock and analog input 15.
12 RC4/SDI1/SDA1/AN16 bidirectional Schmitt Trigger digital I/O shared with MSSP1 SPI data in, I2C data I/O and analog input 16.
13 RC5/SDO1/AN17 bidirectional Schmitt Trigger digital I/O shared with MSSP1 SPI data out and analog input 17.
14 RC6/P3A/CCP3/TX1/CK1/AN18 bidirectional Schmitt Trigger digital I/O shared with alternate P3A/CCP3, EUSART1 transmit/synchronous clock and analog input 18.
15 RC7/P3B/RX1/DT1/AN19 bidirectional Schmitt Trigger digital I/O shared with ECCP3 PWM output P3B, EUSART1 receive/synchronous data and analog input 19.
16 VSS power_in Ground reference for logic and I/O pins.
17 VDD power_in Positive supply for logic and I/O pins.
18 RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 bidirectional TTL digital I/O shared with external interrupt 0, CCP4, ECCP auto-shutdown fault input, SR latch input, MSSP2 SPI client select and analog input 12.
19 RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 bidirectional TTL digital I/O shared with external interrupt 1, P1C PWM output, MSSP2 SPI/I2C clock, comparator C1/C2 inverting input 3 and analog input 10.
20 RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 bidirectional TTL digital I/O shared with external interrupt 2, CTMU edge 1 input, P1B PWM output, MSSP2 SPI data in/I2C data and analog input 8.
21 RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 bidirectional TTL digital I/O shared with CTMU edge 2 input, P2A/CCP2 (alternate), MSSP2 SPI data out, comparator C1/C2 inverting input 2 and analog input 9.
22 RB4/IOC0/P1D/T5G/AN11 bidirectional TTL digital I/O with interrupt-on-change, shared with P1D PWM output, Timer5 gate input and analog input 11.
23 RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 bidirectional TTL digital I/O with interrupt-on-change, shared with P2B, P3A/CCP3, Timer3 clock input, Timer1 gate input and analog input 13.
24 RB6/IOC2/TX2/CK2/PGC bidirectional TTL digital I/O with interrupt-on-change, shared with EUSART2 transmit/clock and the In-Circuit Debugger/ICSP programming clock.
25 RB7/IOC3/RX2/DT2/PGD bidirectional TTL digital I/O with interrupt-on-change, shared with EUSART2 receive/data and the In-Circuit Debugger/ICSP programming data pin.
26 RE3/VPP/MCLR input Schmitt Trigger digital input, programming voltage input (VPP) or active-low Master Clear (device Reset) input.
27 RA0/C12IN0-/AN0 bidirectional TTL digital I/O shared with comparators C1 and C2 inverting input 0 and analog input 0.
28 RA1/C12IN1-/AN1 bidirectional TTL digital I/O shared with comparators C1 and C2 inverting input 1 and analog input 1.
29 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-28-EP(6x6)
Category Single Chip Microcomputer/Microcontroller
Pins 29

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (PIC18F2X/4XK22) VDD 2.3 5.5 V PIC18F2X/4XK22 417
RAM Data Retention Voltage VDR 1.5 V 417
VDD Start Voltage for POR VPOR 0.7 V See section on Power-on Reset for details 417
VDD Rise Rate for POR SVDD 0.05 V/ms See section on Power-on Reset for details 417
Brown-out Reset Voltage VBOR 1.75 1.9 2.05 V BORV<1:0> = 11 417
Brown-out Reset Voltage VBOR 2.05 2.2 2.35 V BORV<1:0> = 10 417
Brown-out Reset Voltage VBOR 2.35 2.5 2.65 V BORV<1:0> = 01 417
Brown-out Reset Voltage VBOR 2.65 2.85 3.05 V BORV<1:0> = 00 417
Operating temperature TA -40 125 °C 417
Sleep mode current (max +85°C) IPD 13 30 µA VDD=3.0V, F device, typ at +25°C, max +85°C 418
Sleep mode current (max +125°C) IPD 13 40 µA VDD=3.0V, F device, typ at +25°C 418
Sleep mode current IPD 12 25 µA VDD=2.3V, max +85°C 418
Sleep mode current IPD 13 35 µA VDD=5.0V, max +85°C 418
Supply current RC_RUN 31 kHz IDD 19 55 µA VDD=5.0V, -40°C, FOSC=31 kHz 420
Supply current RC_RUN 16 MHz IDD 2.5 3.5 mA -40°C to +125°C, VDD=5.0V, FOSC=16 MHz HFINTOSC 421
Supply current RC_RUN 64 MHz IDD 6.8 9.5 mA -40°C to +125°C, VDD=5.0V, FOSC=64 MHz HFINTOSC+PLL 421
Voltage on VDD with respect to VSS VDD -0.3 6.5 V PIC18(L)F26K22 414
Voltage on any pin with respect to VSS -0.3 V except VDD and MCLR; max VDD + 0.3V 414
Voltage on MCLR with respect to VSS 0 11 V 414
Ambient temperature under bias -40 125 °C 414
Storage temperature -65 150 °C 414
Total power dissipation 1 W 414
Max current out of VSS pin 300 mA -40°C to +85°C 414
Max current out of VSS pin 125 mA +85°C to +125°C 414
Max current into VDD pin 200 mA -40°C to +85°C 414
Max current into VDD pin 85 mA +85°C to +125°C 414
Input clamp current IIK 20 mA VI < 0 or VI > VDD 414
Output clamp current IOK 20 mA VO < 0 or VO > VDD 414
Max current sunk by all ports 200 mA -40°C to +85°C 414
Internal oscillator accuracy -1 1 % Factory-calibrated 16 MHz internal oscillator 1

CAD (KiCad official)

  • Symbol: PIC18F26K22-E
  • Footprint: Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm
  • 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: pic18f26k22-e-etched.step / pic18f26k22-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f26k22-e.step / pic18f26k22-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (539 pp, sha256 d0ba745eb6a13bdb, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF