3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC18F26K22-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-28-EP(6x6)
PIC18F26K22-E from Microchip Tech, in a QFN-28-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/C2IN+/AN2/DACOUT/VREF- | bidirectional | TTL digital I/O shared with comparator C2 noninverting input, analog input 2, DAC reference output and A/D low reference voltage input. |
| 2 | RA3/C1IN+/AN3/VREF+ | bidirectional | TTL digital I/O shared with comparator C1 noninverting input, analog input 3 and A/D high reference voltage input. |
| 3 | RA4/CCP5/C1OUT/SRQ/T0CKI | bidirectional | Schmitt Trigger digital I/O shared with CCP5, comparator C1 output, SR latch Q output and Timer0 external clock input. |
| 4 | RA5/C2OUT/SRNQ/SS1/HLVDIN/AN4 | bidirectional | TTL digital I/O shared with comparator C2 output, SR latch output, MSSP1 SPI client select input, High/Low-Voltage Detect input and analog input 4. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RA7/CLKI/OSC1 | bidirectional | TTL digital I/O shared with external clock source input and oscillator crystal input (OSC1). |
| 7 | RA6/CLKO/OSC2 | bidirectional | TTL digital I/O shared with CLKOUT (1/4 the OSC1 frequency in RC mode) and oscillator crystal output (OSC2). |
| 8 | RC0/P2B/T3CKI/T3G/T1CKI/SOSCO | bidirectional | Schmitt Trigger digital I/O shared with alternate P2B PWM output, Timer3 clock input, Timer3 gate input, Timer1 clock input and secondary oscillator output. |
| 9 | RC1/P2A/CCP2/SOSCI | bidirectional | Schmitt Trigger digital I/O shared with Enhanced CCP2 PWM output P2A, CCP2 (default pin) and secondary oscillator input. |
| 10 | RC2/CTPLS/P1A/CCP1/T5CKI/AN14 | bidirectional | Schmitt Trigger digital I/O shared with CTMU pulse generator output, ECCP1 PWM output P1A/CCP1, Timer5 clock input and analog input 14. |
| 11 | RC3/SCK1/SCL1/AN15 | bidirectional | Schmitt Trigger digital I/O shared with MSSP1 SPI/I2C clock and analog input 15. |
| 12 | RC4/SDI1/SDA1/AN16 | bidirectional | Schmitt Trigger digital I/O shared with MSSP1 SPI data in, I2C data I/O and analog input 16. |
| 13 | RC5/SDO1/AN17 | bidirectional | Schmitt Trigger digital I/O shared with MSSP1 SPI data out and analog input 17. |
| 14 | RC6/P3A/CCP3/TX1/CK1/AN18 | bidirectional | Schmitt Trigger digital I/O shared with alternate P3A/CCP3, EUSART1 transmit/synchronous clock and analog input 18. |
| 15 | RC7/P3B/RX1/DT1/AN19 | bidirectional | Schmitt Trigger digital I/O shared with ECCP3 PWM output P3B, EUSART1 receive/synchronous data and analog input 19. |
| 16 | VSS | power_in | Ground reference for logic and I/O pins. |
| 17 | VDD | power_in | Positive supply for logic and I/O pins. |
| 18 | RB0/INT0/CCP4/FLT0/SRI/SS2/AN12 | bidirectional | TTL digital I/O shared with external interrupt 0, CCP4, ECCP auto-shutdown fault input, SR latch input, MSSP2 SPI client select and analog input 12. |
| 19 | RB1/INT1/P1C/SCK2/SCL2/C12IN3-/AN10 | bidirectional | TTL digital I/O shared with external interrupt 1, P1C PWM output, MSSP2 SPI/I2C clock, comparator C1/C2 inverting input 3 and analog input 10. |
| 20 | RB2/INT2/CTED1/P1B/SDI2/SDA2/AN8 | bidirectional | TTL digital I/O shared with external interrupt 2, CTMU edge 1 input, P1B PWM output, MSSP2 SPI data in/I2C data and analog input 8. |
| 21 | RB3/CTED2/P2A/CCP2/SDO2/C12IN2-/AN9 | bidirectional | TTL digital I/O shared with CTMU edge 2 input, P2A/CCP2 (alternate), MSSP2 SPI data out, comparator C1/C2 inverting input 2 and analog input 9. |
| 22 | RB4/IOC0/P1D/T5G/AN11 | bidirectional | TTL digital I/O with interrupt-on-change, shared with P1D PWM output, Timer5 gate input and analog input 11. |
| 23 | RB5/IOC1/P2B/P3A/CCP3/T3CKI/T1G/AN13 | bidirectional | TTL digital I/O with interrupt-on-change, shared with P2B, P3A/CCP3, Timer3 clock input, Timer1 gate input and analog input 13. |
| 24 | RB6/IOC2/TX2/CK2/PGC | bidirectional | TTL digital I/O with interrupt-on-change, shared with EUSART2 transmit/clock and the In-Circuit Debugger/ICSP programming clock. |
| 25 | RB7/IOC3/RX2/DT2/PGD | bidirectional | TTL digital I/O with interrupt-on-change, shared with EUSART2 receive/data and the In-Circuit Debugger/ICSP programming data pin. |
| 26 | RE3/VPP/MCLR | input | Schmitt Trigger digital input, programming voltage input (VPP) or active-low Master Clear (device Reset) input. |
| 27 | RA0/C12IN0-/AN0 | bidirectional | TTL digital I/O shared with comparators C1 and C2 inverting input 0 and analog input 0. |
| 28 | RA1/C12IN1-/AN1 | bidirectional | TTL digital I/O shared with comparators C1 and C2 inverting input 1 and analog input 1. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-28-EP(6x6) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (PIC18F2X/4XK22) | VDD | 2.3 | 5.5 | V | PIC18F2X/4XK22 | 417 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | 417 | |||
| VDD Start Voltage for POR | VPOR | 0.7 | V | See section on Power-on Reset for details | 417 | ||
| VDD Rise Rate for POR | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 417 | ||
| Brown-out Reset Voltage | VBOR | 1.75 | 1.9 | 2.05 | V | BORV<1:0> = 11 | 417 |
| Brown-out Reset Voltage | VBOR | 2.05 | 2.2 | 2.35 | V | BORV<1:0> = 10 | 417 |
| Brown-out Reset Voltage | VBOR | 2.35 | 2.5 | 2.65 | V | BORV<1:0> = 01 | 417 |
| Brown-out Reset Voltage | VBOR | 2.65 | 2.85 | 3.05 | V | BORV<1:0> = 00 | 417 |
| Operating temperature | TA | -40 | 125 | °C | 417 | ||
| Sleep mode current (max +85°C) | IPD | 13 | 30 | µA | VDD=3.0V, F device, typ at +25°C, max +85°C | 418 | |
| Sleep mode current (max +125°C) | IPD | 13 | 40 | µA | VDD=3.0V, F device, typ at +25°C | 418 | |
| Sleep mode current | IPD | 12 | 25 | µA | VDD=2.3V, max +85°C | 418 | |
| Sleep mode current | IPD | 13 | 35 | µA | VDD=5.0V, max +85°C | 418 | |
| Supply current RC_RUN 31 kHz | IDD | 19 | 55 | µA | VDD=5.0V, -40°C, FOSC=31 kHz | 420 | |
| Supply current RC_RUN 16 MHz | IDD | 2.5 | 3.5 | mA | -40°C to +125°C, VDD=5.0V, FOSC=16 MHz HFINTOSC | 421 | |
| Supply current RC_RUN 64 MHz | IDD | 6.8 | 9.5 | mA | -40°C to +125°C, VDD=5.0V, FOSC=64 MHz HFINTOSC+PLL | 421 | |
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | PIC18(L)F26K22 | 414 | |
| Voltage on any pin with respect to VSS | -0.3 | V | except VDD and MCLR; max VDD + 0.3V | 414 | |||
| Voltage on MCLR with respect to VSS | 0 | 11 | V | 414 | |||
| Ambient temperature under bias | -40 | 125 | °C | 414 | |||
| Storage temperature | -65 | 150 | °C | 414 | |||
| Total power dissipation | 1 | W | 414 | ||||
| Max current out of VSS pin | 300 | mA | -40°C to +85°C | 414 | |||
| Max current out of VSS pin | 125 | mA | +85°C to +125°C | 414 | |||
| Max current into VDD pin | 200 | mA | -40°C to +85°C | 414 | |||
| Max current into VDD pin | 85 | mA | +85°C to +125°C | 414 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 414 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 414 | ||
| Max current sunk by all ports | 200 | mA | -40°C to +85°C | 414 | |||
| Internal oscillator accuracy | -1 | 1 | % | Factory-calibrated 16 MHz internal oscillator | 1 |
CAD (KiCad official)
- Symbol:
PIC18F26K22-E - Footprint:
Package_DFN_QFN:QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm - 3D model: QFN-28-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
pic18f26k22-e-etched.step/pic18f26k22-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f26k22-e.step/pic18f26k22-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (539 pp, sha256
d0ba745eb6a13bdb, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).