Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

S-13A1A10-U5T1U3

ABLIC · Linear Voltage Regulators (LDO) · SOT-89-5

S-13A1A10-U5T1U3 from ABLIC, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ON / OFF input ON / OFF pin starts and stops the regulator (active "H"); for type A it is internally pulled down to VSS when floating, and its absolute maximum rating is VSS − 0.3 V to VSS + 6.0 V.
2 VSS power_in GND pin, the ground reference for the regulator; the output capacitor CL (2.2 μF or more) connects between VOUT and VSS.
3 SSC passive Inrush current limit pin; a capacitor CSS of 22 nF or less (0 nF to 22 nF recommended) connects between SSC and VSS, or the pin can be left open, and its absolute maximum rating is VSS − 0.3 V to VIN + 0.3 V.
4 VIN power_in Input voltage pin, rated 1.5 V to 5.5 V, with an absolute maximum rating of VSS − 0.3 V to VSS + 6.0 V; a 2.2 μF or more input capacitor (CIN) is recommended.
5 VOUT power_out Output voltage pin, capable of 1000 mA when VIN ≥ VOUT(S) + 1.0 V; it must not exceed VIN + 0.3 V, and its absolute maximum rating is VSS − 0.3 V to VIN + 0.3 V.

Key specifications

Parameter Value
Manufacturer ABLIC
Package SOT-89-5
Category Power Management
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage accuracy (1.0 V to 1.45 V internally set product) VOUT(E) -15 15 mV Internally set, 1.0 V to 1.45 V output product 1
Output current IOUT 1000 mA VIN ≥ VOUT(S) + 1.0 V 13
Dropout voltage Vdrop 0.5 0.54 0.58 V IOUT = 300 mA; 1.0 V ≤ VOUT(S) < 1.1 V 13
Line regulation ΔVOUT1/(ΔVIN·VOUT) 0.05 0.2 %/V VOUT(S) + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 100 mA 13
Load regulation ΔVOUT2 -20 -3 20 mV VIN = VOUT(S) + 1.0 V, 1 mA ≤ IOUT ≤ 300 mA 13
Output voltage temperature coefficient ΔVOUT/(ΔTa·VOUT) -100 100 ppm/°C VIN = VOUT(S) + 1.0 V, IOUT = 100 mA, −40°C ≤ Ta ≤ +85°C 13
Current consumption during operation ISS1 60 90 μA VIN = VOUT(S) + 1.0 V, ON / OFF pin = ON, no load 13
Current consumption during power-off ISS2 0.1 1 μA VIN = VOUT(S) + 1.0 V, ON / OFF pin = OFF, no load 13
Input voltage VIN 1.5 5.5 V 13
ON / OFF pin input voltage "H" VSH 1 V VIN = VOUT(S) + 1.0 V, RL = 1.0 kΩ, determined by VOUT output level 13
ON / OFF pin input voltage "L" VSL 0.3 V VIN = VOUT(S) + 1.0 V, RL = 1.0 kΩ, determined by VOUT output level 13
ON / OFF pin input current "H" (A / C type, with pull-down resistor) ISH 1 2.5 5 μA VIN = 5.5 V, VON / OFF = 5.5 V; A / C type (with pull-down resistor) 13
ON / OFF pin input current "L" ISL -0.1 0.1 μA VIN = 5.5 V, VON / OFF = 0 V 13
Power-off pull-down resistor (A / C type) RPD 1.1 2.2 5.5 MΩ A / C type (with pull-down resistor) 14
Input voltage (absolute maximum, referenced to VSS) VIN -0.3 6 V Referenced to VSS: VSS − 0.3 to VSS + 6.0 V 12
ON / OFF pin voltage (absolute maximum, referenced to VSS) VON/OFF -0.3 6 V Referenced to VSS: VSS − 0.3 to VSS + 6.0 V 12
Output current (absolute maximum) IOUT 1000 mA 12
Operation ambient temperature Topr -40 85 °C 12
Storage temperature Tstg -40 125 °C 12
Junction-to-ambient thermal resistance (SOT-89-5) θJA 119 °C/W Board A, JEDEC JESD51-2A 12
Junction-to-ambient thermal resistance (SOT-89-5) θJA 84 °C/W Board B, JEDEC JESD51-2A 12
Junction-to-ambient thermal resistance (SOT-89-5) θJA 46 °C/W Board D, JEDEC JESD51-2A 12
Junction-to-ambient thermal resistance (SOT-89-5) θJA 35 °C/W Board E, JEDEC JESD51-2A 12

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin • Lead-free (Sn 100%), halogen-free *1. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large. 1

CAD (KiCad official)

  • Symbol: S-13A1A10-U5T1U3
  • Footprint: Package_TO_SOT_SMD:SOT-89-5
  • 3D model: SOT-89-5 (KiCad packages3D, STEP)
  • 3D model files: s-13a1a10-u5t1u3-etched.step / s-13a1a10-u5t1u3-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); s-13a1a10-u5t1u3.step / s-13a1a10-u5t1u3.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ABLIC datasheet (61 pp, sha256 d74bdd54f7501321, retrieved 2026-10-31, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF