Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
S-13A1A10-U5T1U3
ABLIC · Linear Voltage Regulators (LDO) · SOT-89-5
S-13A1A10-U5T1U3 from ABLIC, in a SOT-89-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ON / OFF | input | ON / OFF pin starts and stops the regulator (active "H"); for type A it is internally pulled down to VSS when floating, and its absolute maximum rating is VSS − 0.3 V to VSS + 6.0 V. |
| 2 | VSS | power_in | GND pin, the ground reference for the regulator; the output capacitor CL (2.2 μF or more) connects between VOUT and VSS. |
| 3 | SSC | passive | Inrush current limit pin; a capacitor CSS of 22 nF or less (0 nF to 22 nF recommended) connects between SSC and VSS, or the pin can be left open, and its absolute maximum rating is VSS − 0.3 V to VIN + 0.3 V. |
| 4 | VIN | power_in | Input voltage pin, rated 1.5 V to 5.5 V, with an absolute maximum rating of VSS − 0.3 V to VSS + 6.0 V; a 2.2 μF or more input capacitor (CIN) is recommended. |
| 5 | VOUT | power_out | Output voltage pin, capable of 1000 mA when VIN ≥ VOUT(S) + 1.0 V; it must not exceed VIN + 0.3 V, and its absolute maximum rating is VSS − 0.3 V to VIN + 0.3 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ABLIC |
| Package | SOT-89-5 |
| Category | Power Management |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage accuracy (1.0 V to 1.45 V internally set product) | VOUT(E) | -15 | 15 | mV | Internally set, 1.0 V to 1.45 V output product | 1 | |
| Output current | IOUT | 1000 | mA | VIN ≥ VOUT(S) + 1.0 V | 13 | ||
| Dropout voltage | Vdrop | 0.5 | 0.54 | 0.58 | V | IOUT = 300 mA; 1.0 V ≤ VOUT(S) < 1.1 V | 13 |
| Line regulation | ΔVOUT1/(ΔVIN·VOUT) | 0.05 | 0.2 | %/V | VOUT(S) + 0.5 V ≤ VIN ≤ 5.5 V, IOUT = 100 mA | 13 | |
| Load regulation | ΔVOUT2 | -20 | -3 | 20 | mV | VIN = VOUT(S) + 1.0 V, 1 mA ≤ IOUT ≤ 300 mA | 13 |
| Output voltage temperature coefficient | ΔVOUT/(ΔTa·VOUT) | -100 | 100 | ppm/°C | VIN = VOUT(S) + 1.0 V, IOUT = 100 mA, −40°C ≤ Ta ≤ +85°C | 13 | |
| Current consumption during operation | ISS1 | 60 | 90 | μA | VIN = VOUT(S) + 1.0 V, ON / OFF pin = ON, no load | 13 | |
| Current consumption during power-off | ISS2 | 0.1 | 1 | μA | VIN = VOUT(S) + 1.0 V, ON / OFF pin = OFF, no load | 13 | |
| Input voltage | VIN | 1.5 | 5.5 | V | 13 | ||
| ON / OFF pin input voltage "H" | VSH | 1 | V | VIN = VOUT(S) + 1.0 V, RL = 1.0 kΩ, determined by VOUT output level | 13 | ||
| ON / OFF pin input voltage "L" | VSL | 0.3 | V | VIN = VOUT(S) + 1.0 V, RL = 1.0 kΩ, determined by VOUT output level | 13 | ||
| ON / OFF pin input current "H" (A / C type, with pull-down resistor) | ISH | 1 | 2.5 | 5 | μA | VIN = 5.5 V, VON / OFF = 5.5 V; A / C type (with pull-down resistor) | 13 |
| ON / OFF pin input current "L" | ISL | -0.1 | 0.1 | μA | VIN = 5.5 V, VON / OFF = 0 V | 13 | |
| Power-off pull-down resistor (A / C type) | RPD | 1.1 | 2.2 | 5.5 | MΩ | A / C type (with pull-down resistor) | 14 |
| Input voltage (absolute maximum, referenced to VSS) | VIN | -0.3 | 6 | V | Referenced to VSS: VSS − 0.3 to VSS + 6.0 V | 12 | |
| ON / OFF pin voltage (absolute maximum, referenced to VSS) | VON/OFF | -0.3 | 6 | V | Referenced to VSS: VSS − 0.3 to VSS + 6.0 V | 12 | |
| Output current (absolute maximum) | IOUT | 1000 | mA | 12 | |||
| Operation ambient temperature | Topr | -40 | 85 | °C | 12 | ||
| Storage temperature | Tstg | -40 | 125 | °C | 12 | ||
| Junction-to-ambient thermal resistance (SOT-89-5) | θJA | 119 | °C/W | Board A, JEDEC JESD51-2A | 12 | ||
| Junction-to-ambient thermal resistance (SOT-89-5) | θJA | 84 | °C/W | Board B, JEDEC JESD51-2A | 12 | ||
| Junction-to-ambient thermal resistance (SOT-89-5) | θJA | 46 | °C/W | Board D, JEDEC JESD51-2A | 12 | ||
| Junction-to-ambient thermal resistance (SOT-89-5) | θJA | 35 | °C/W | Board E, JEDEC JESD51-2A | 12 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | • Lead-free (Sn 100%), halogen-free *1. Please make sure that the loss of the IC will not exceed the power dissipation when the output current is large. | 1 |
CAD (KiCad official)
- Symbol:
S-13A1A10-U5T1U3 - Footprint:
Package_TO_SOT_SMD:SOT-89-5 - 3D model: SOT-89-5 (KiCad packages3D, STEP)
- 3D model files:
s-13a1a10-u5t1u3-etched.step/s-13a1a10-u5t1u3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);s-13a1a10-u5t1u3.step/s-13a1a10-u5t1u3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ABLIC datasheet (61 pp, sha256
d74bdd54f7501321, retrieved 2026-10-31, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).