Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SL6243A

CoreChips · USB HUB Controllers · QFN-20-EP(3x3)

SL6243A from CoreChips, in a QFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 UDM bidirectional Upstream port USB 2.0 D- signal line.
2 UDP bidirectional Upstream port USB 2.0 D+ signal line.
3 RESET_N input External active-low reset input with internal pull-up, wire-ANDed with the internal power-on reset; the datasheet states an external reset pulse width greater than 15 ms.
4 VbusValid input VBUS input detect with internal pull-down: 0 = hub inactive state, 1 = hub operating state.
5 PSELF input Self-powered/bus-powered select with internal pull-up: default self-powered, low selects bus-powered operation.
6 VCC5 power_in 5 V supply input that feeds the internal 3.3 V LDO.
7 VDD33 power_out Output of the internal 3.3 V LDO; requires an external 4.7 uF capacitor to ground, placed close to pin 7.
8 VDD12 power_out Output of the internal 1.2 V LDO; requires an external 2.2-4.7 uF capacitor to ground, placed close to pin 8.
9 DRV bidirectional LED drive signal with internal pull-up; during power-up it is the active-low BC1.2 configuration input (0 = BC1.2 enabled, 1 = BC1.2 disabled, default disabled).
10 VSS power_in Chip ground.
11 XOUT output Crystal oscillator output for an external 12 MHz crystal.
12 XIN input Crystal oscillator input for an external 12 MHz crystal.
13 DP4 bidirectional Downstream port 4 USB D+ signal line.
14 DM4 bidirectional Downstream port 4 USB D- signal line.
15 DM3 bidirectional Downstream port 3 USB D- signal line.
16 DP3 bidirectional Downstream port 3 USB D+ signal line.
17 DM2 bidirectional Downstream port 2 USB D- signal line.
18 DP2 bidirectional Downstream port 2 USB D+ signal line.
19 DM1 bidirectional Downstream port 1 USB D- signal line.
20 DP1 bidirectional Downstream port 1 USB D+ signal line.
21 VSS passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer CoreChips
Package QFN-20-EP(3x3)
Category Interface
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply (VDDM) VDDM -0.5 5.5 V 9
Input Voltage for digital I/O VIN -0.5 5.5 V 9
Input Voltage for USB signal (DP, DM) pins VINUSB -0.5 5.5 V 9
Storage Temperature under bias TS -60 125 ℃ 9
Oscillator frequency tolerance (nominal 12 MHz, printed as 12 MHz ± 0.05%) FOSC -0.05 0.05 % 9
Power Supply VDD 4 5 5.25 V 9
Input Voltage for digital I/O pins VIND -0.5 3.3 3.63 V 9
Input Voltage for USB signal (DP, DM) pins VINUSB -0.5 3.3 3.63 V 9
Ambient Temperature TA -40 85 ℃ 9
Supply Current IDD 50 120 mA 9
Suspend Current ISUS 2.5 mA 9

CAD (KiCad official)

  • Symbol: SL6243A
  • Footprint: Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm
  • 3D model: QFN-20-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: sl6243a-etched.step / sl6243a-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sl6243a.step / sl6243a.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: CoreChips datasheet (12 pp, sha256 552e74260ab43284, retrieved 2026-11-11, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF