Generated by kicad-footprint-generator · KiCad file format 20260206
SL6243A
CoreChips · USB HUB Controllers · QFN-20-EP(3x3)
SL6243A from CoreChips, in a QFN-20-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | UDM | bidirectional | Upstream port USB 2.0 D- signal line. |
| 2 | UDP | bidirectional | Upstream port USB 2.0 D+ signal line. |
| 3 | RESET_N | input | External active-low reset input with internal pull-up, wire-ANDed with the internal power-on reset; the datasheet states an external reset pulse width greater than 15 ms. |
| 4 | VbusValid | input | VBUS input detect with internal pull-down: 0 = hub inactive state, 1 = hub operating state. |
| 5 | PSELF | input | Self-powered/bus-powered select with internal pull-up: default self-powered, low selects bus-powered operation. |
| 6 | VCC5 | power_in | 5 V supply input that feeds the internal 3.3 V LDO. |
| 7 | VDD33 | power_out | Output of the internal 3.3 V LDO; requires an external 4.7 uF capacitor to ground, placed close to pin 7. |
| 8 | VDD12 | power_out | Output of the internal 1.2 V LDO; requires an external 2.2-4.7 uF capacitor to ground, placed close to pin 8. |
| 9 | DRV | bidirectional | LED drive signal with internal pull-up; during power-up it is the active-low BC1.2 configuration input (0 = BC1.2 enabled, 1 = BC1.2 disabled, default disabled). |
| 10 | VSS | power_in | Chip ground. |
| 11 | XOUT | output | Crystal oscillator output for an external 12 MHz crystal. |
| 12 | XIN | input | Crystal oscillator input for an external 12 MHz crystal. |
| 13 | DP4 | bidirectional | Downstream port 4 USB D+ signal line. |
| 14 | DM4 | bidirectional | Downstream port 4 USB D- signal line. |
| 15 | DM3 | bidirectional | Downstream port 3 USB D- signal line. |
| 16 | DP3 | bidirectional | Downstream port 3 USB D+ signal line. |
| 17 | DM2 | bidirectional | Downstream port 2 USB D- signal line. |
| 18 | DP2 | bidirectional | Downstream port 2 USB D+ signal line. |
| 19 | DM1 | bidirectional | Downstream port 1 USB D- signal line. |
| 20 | DP1 | bidirectional | Downstream port 1 USB D+ signal line. |
| 21 | VSS | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | CoreChips |
| Package | QFN-20-EP(3x3) |
| Category | Interface |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply (VDDM) | VDDM | -0.5 | 5.5 | V | 9 | ||
| Input Voltage for digital I/O | VIN | -0.5 | 5.5 | V | 9 | ||
| Input Voltage for USB signal (DP, DM) pins | VINUSB | -0.5 | 5.5 | V | 9 | ||
| Storage Temperature under bias | TS | -60 | 125 | ℃ | 9 | ||
| Oscillator frequency tolerance (nominal 12 MHz, printed as 12 MHz ± 0.05%) | FOSC | -0.05 | 0.05 | % | 9 | ||
| Power Supply | VDD | 4 | 5 | 5.25 | V | 9 | |
| Input Voltage for digital I/O pins | VIND | -0.5 | 3.3 | 3.63 | V | 9 | |
| Input Voltage for USB signal (DP, DM) pins | VINUSB | -0.5 | 3.3 | 3.63 | V | 9 | |
| Ambient Temperature | TA | -40 | 85 | ℃ | 9 | ||
| Supply Current | IDD | 50 | 120 | mA | 9 | ||
| Suspend Current | ISUS | 2.5 | mA | 9 |
CAD (KiCad official)
- Symbol:
SL6243A - Footprint:
Package_DFN_QFN:QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm - 3D model: QFN-20-EP(3x3), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.9 mm tall, family nominal (no datasheet A read)). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
sl6243a-etched.step/sl6243a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl6243a.step/sl6243a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: CoreChips datasheet (12 pp, sha256
552e74260ab43284, retrieved 2026-11-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).